West Midlands · England
Telescopic bollard installation in Kingswinford
Telescopic bollards supplied and fitted in Kingswinford, West Midlands: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout telescopic bollards in Kingswinford
We supply and fit telescopic bollards throughout Kingswinford, typically for sites such as residential driveways, small industrial units and schools. Because the post stays in its cassette, there is nothing to store and nothing to lose.
We work across DY6 and DY3 — Kingswinford itself and places including Hinksford. Nearby, we also work in Brierley Hill (2.3 miles), Stourbridge (3.1 miles), Dudley (3.6 miles) and Tipton (4.8 miles), measured as the crow flies. Kingswinford is about 6 miles from Wolverhampton.
Kingswinford at a glance
- Area
- West Midlands, England
- Highway authority
- Dudley Council (local roads)
- Planning authority
- Dudley Council
- Postcodes
- DY6 and DY3
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
- Nearby
- Brierley Hill (2.3 mi), Stourbridge (3.1 mi), Dudley (3.6 mi), Tipton (4.8 mi)
Guide prices for Kingswinford
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Telescopic bollards in Kingswinford: common uses
Typical reasons Kingswinford sites choose telescopic bollards:
- Shared drives that need occasional closing
- Car parks where a removable post would go missing
- Domestic driveways where the bollard is used daily
What we check first in Kingswinford
Dudley Council is the highway authority covering Kingswinford's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (Dudley Council) first — we flag this at survey.
Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used. Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go.
- If the drive is shared, agree positions and keys with the other users first.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
What happens on site
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Options to consider
| Option | Detail |
|---|---|
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
What affects the quote
When we price telescopic bollards in Kingswinford, these make the biggest difference:
- Number of posts and keyed-alike locks
- Drainage: simple soakaway or a connection to a drain
- Excavation depth and the presence of services under the drive
Keeping them working
Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt. Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free.
For damaged or loose posts in Kingswinford, repairs and replacements are priced in writing first.
Common questions
Which parts of Kingswinford do you cover for telescopic bollards?
We cover all of Kingswinford (DY6 and DY3) and the rest of West Midlands. We also work in Brierley Hill, Stourbridge and Dudley.
Who gives permission for bollards on the pavement in Kingswinford?
In Kingswinford, work on adopted pavements and verges needs consent from Dudley Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for telescopic bollards in Kingswinford?
In Kingswinford, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our West Midlands guide prices. The fixed figure comes in writing after we've seen the site.
Will a telescopic bollard stop my car being stolen?
It adds a physical barrier that a thief has to defeat before driving away, which slows them down and makes the car a less attractive target. It is one layer of protection, not a complete answer to keyless car theft.
Is a telescopic bollard harder to lift than a removable one?
Usually easier, because you only lift it up a short distance within its cassette and many models have lift assistance. You also never carry it or store it anywhere.
Telescopic bollards in nearby towns
- Brierley Hill (2.3 mi)
- Stourbridge (3.1 mi)
- Dudley (3.6 mi)
- Tipton (4.8 mi)
- Halesowen (6.1 mi)
- Wolverhampton (6.4 mi)