Bollard Installers

England · 18 towns

Telescopic bollard installation in West Yorkshire

Telescopic bollards for sites across West Yorkshire: surveyed, quoted in writing and installed by our crews.

Telescopic security bollard part-lowered into its ground cassette on a block-paved driveway in front of a house garageComputer-generated image

Telescopic bollards in West Yorkshire

We supply and install telescopic bollards across West Yorkshire, with local pages for 18 towns below. Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads.

Highway authorities for local roads in West Yorkshire: Bradford Council, Calderdale Council, Kirklees Council, Leeds City Council and Wakefield Council.

Choose your town in West Yorkshire

Guide prices in West Yorkshire

SpecificationGuide priceIncludes
Standard£335–£685 + VAT · £395–£815 inc VATStandard post, foundation, reinstatement
Upgraded£585–£925 + VAT · £695–£1,095 inc VATUpgraded finish or fittings, reflective band, matched keys
Premium£825–£1,145 + VAT · £985–£1,345 inc VATHeavy-duty or architectural spec, premium finish

Per bollard with cassette, supplied and installed; -3% for Yorkshire and the Humber. Guide only — the fixed price follows a survey.

Who looks after the roads in West Yorkshire

TownHighway / roads authorityPlanning authority
LeedsLeeds City CouncilLeeds City Council
BradfordBradford CouncilBradford Council
HuddersfieldKirklees CouncilKirklees Council
WakefieldWakefield CouncilWakefield Council
HalifaxCalderdale CouncilCalderdale Council
DewsburyKirklees CouncilKirklees Council
MorleyLeeds City CouncilLeeds City Council
KeighleyBradford CouncilBradford Council
CastlefordWakefield CouncilWakefield Council
PontefractWakefield CouncilWakefield Council
BatleyKirklees CouncilKirklees Council
YeadonLeeds City CouncilLeeds City Council
BrighouseCalderdale CouncilCalderdale Council
ShipleyBradford CouncilBradford Council
CleckheatonKirklees CouncilKirklees Council
PudseyLeeds City CouncilLeeds City Council
OssettWakefield CouncilWakefield Council
GuiseleyLeeds City CouncilLeeds City Council

Rules for telescopic bollards in England

Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.

Details and sources: bollard rules in England.

How installation works

Cut and excavate

The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.

Form the drainage

A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.

Set the cassette

The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.

Reinstate and test

The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.

Telescopic bollards in West Yorkshire: FAQs

Do you cover all of West Yorkshire for telescopic bollards?

Yes — including Leeds, Bradford, Huddersfield, Wakefield, Halifax, Dewsbury, Morley and Keighley. Enter your postcode in the price calculator to confirm.

How much do telescopic bollards cost in West Yorkshire?

In West Yorkshire, typically £335–£1,145 per bollard with cassette, supplied and installed, plus VAT (£395–£1,345 including VAT for homeowners), with a minimum job of £625 plus VAT, using our Yorkshire and the Humber guide prices. The fixed figure comes in writing after we've seen the site.

Who do I ask about bollards on public land in West Yorkshire?

For local roads, Bradford Council, Calderdale Council, Kirklees Council, Leeds City Council and Wakefield Council; National Highways covers motorways and trunk roads. Bollards on adopted highway need the highway authority's written agreement.

Is a telescopic bollard harder to lift than a removable one?

Usually easier, because you only lift it up a short distance within its cassette and many models have lift assistance. You also never carry it or store it anywhere.

Can a telescopic bollard be fitted into a resin or imprinted drive?

Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.

Other services in West Yorkshire

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote