Cambridgeshire · England
Timber bollard installation in Wisbech
Local installation of timber bollards in Wisbech — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageWisbech timber bollards
We supply and fit timber bollards throughout Wisbech, typically for sites such as residential driveways, schools and local parades. Timber bollards deter and guide vehicles; they are not tested barriers.
Coverage in Wisbech takes in the PE13 postcode district and nearby places like Leverington, Parson Drove, Newton-in-the-Isle and Guyhirn. Nearby, we also work in March (8.5 miles), King's Lynn (11.5 miles), Spalding (15.5 miles) and Peterborough (18.2 miles), measured as the crow flies.
Local details
- Area
- Cambridgeshire, England
- Highway authority
- Cambridgeshire County Council (local roads)
- Planning authority
- the council for Fenland
- Postcodes
- PE13
- Guide price
- Typically £95–£355 per post + VAT (£105–£425 inc VAT for homes); minimum job £455
- Survey
- Free, with a fixed written quote
- Nearby
- March (8.5 mi), King's Lynn (11.5 mi), Spalding (15.5 mi), Peterborough (18.2 mi)
Where timber bollards go in around Wisbech
Typical reasons Wisbech sites choose timber bollards:
- Village greens and recreation grounds
- Footpath and bridleway entrances
- Country parks, nature reserves and woodland car parks
Guide prices for Wisbech
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £95–£205 + VAT · £105–£245 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £175–£285 + VAT · £205–£335 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £255–£355 + VAT · £305–£425 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post, supplied and installed; +3% for East of England. Guide only — the fixed price follows a survey.
Permissions and groundwork in Wisbech
In Wisbech, work on adopted pavements and verges needs consent from Cambridgeshire County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Fenland) first — we flag this at survey.
Tree roots are common along verges and parks, and digging close to mature trees can harm them, so positions are adjusted to stay outside root areas where possible. Timber bollards usually go into soft landscape, so the ground varies more than with paved sites.
- Check whether the verge is highway land; posts there usually need the highway authority's agreement.
- Leave pedestrian gaps of typically at least 1,000–1,200 mm, and wider at path entrances used by cycles, buggies and mobility scooters, referring to Inclusive Mobility guidance.
What happens on site
Dig the holes
Holes are dug by hand or auger to the required depth, avoiding roots and checking for services along verges and footpaths.
Set the posts
Posts are set plumb and to a consistent height, backfilled with compacted stone or concreted with a shaped top. Cut softwood ends are re-treated.
Finish and tidy
Reflective bands are fitted, turf is reinstated around the posts and spoil is removed or spread as agreed.
Finishes and options
| Option | Detail |
|---|---|
| Treated softwood | Pressure-treated pine for ground contact, economical for long runs on verges and rural sites. |
| Sizes and profiles | Commonly 100–200 mm square or round, with chamfered, pyramid or domed tops to shed water. |
| Removable and lockable posts | Timber posts in steel sockets, or hinged timber posts, for maintenance and emergency access. |
What affects the quote
Two Wisbech jobs with the same number of posts can price quite differently. The usual reasons:
- Species: treated softwood, oak or tropical hardwood
- Number of posts and length of the line
- Ground conditions, roots and services
Looking after them
Replacing individual damaged posts is straightforward if the original size and species are recorded. Re-treat cut or damaged softwood, keep grass and soil from building up around the base, and replace posts that are soft at the ground line before they snap.
If posts in Wisbech are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about timber bollards in Wisbech
Which parts of Wisbech do you cover for timber bollards?
We cover all of Wisbech (PE13) and the rest of Cambridgeshire. We also work in March, King's Lynn and Spalding.
Do I need consent for timber bollards on a public footway in Wisbech?
The highway authority for local roads in Wisbech is Cambridgeshire County Council; motorways and trunk roads sit with National Highways. Timber bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for timber bollards in Wisbech?
In Wisbech, typically £95–£355 per post, supplied and installed, plus VAT (£105–£425 including VAT for homeowners), with a minimum job of £455 plus VAT, using our East of England guide prices. The fixed figure comes in writing after we've seen the site.
Can timber bollards be removable?
Yes. Timber posts can be fitted into steel ground sockets with a lock, or mounted on a hinged base. That allows maintenance vehicles or emergency services through without a permanent gap.
Do timber bollards stop vehicles?
They stop most drivers deliberately mounting a verge and resist low-speed knocks, especially in dense hardwood. They are not tested barriers and should not be relied on against a vehicle driven at them deliberately.