Gloucestershire · England
Timber bollard installation in Yate
Planning timber bollards in Yate? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageYate timber bollards
Whether it's community buildings, residential driveways and local parades, timber bollards in Yate are planned around who needs to get through and who doesn't. Oak, hardwood and treated softwood bollards for parks, verges, rural sites, car parks and school frontages.
We work across BS37, GL9 and GL12 — Yate itself and places including Chipping Sodbury, Engine Common, Rangeworthy and Iron Acton. Nearby, we also work in Mangotsfield (5.2 miles), Kingswood (7.2 miles), Bristol (9.7 miles) and Bath (11.7 miles), measured as the crow flies. Bristol is around 10 miles away.
Key facts for this area
- Area
- Gloucestershire, England
- Highway authority
- South Gloucestershire Council (local roads)
- Planning authority
- South Gloucestershire Council
- Postcodes
- BS37, GL9 and GL12
- Guide price
- Typically £95–£345 per post + VAT (£105–£405 inc VAT for homes); minimum job £445
- Survey
- Free, with a fixed written quote
- Nearby
- Mangotsfield (5.2 mi), Kingswood (7.2 mi), Bristol (9.7 mi), Bath (11.7 mi)
What timber bollards cost in Yate
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £95–£205 + VAT · £105–£245 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £175–£275 + VAT · £205–£325 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £245–£345 + VAT · £285–£405 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
What Yate sites use timber bollards for
Common uses in a place like Yate:
- School frontages and nursery entrances
- Footpath and bridleway entrances
- Verges on estates and rural lanes
Consents, ground and services in Yate
South Gloucestershire Council is the highway authority covering Yate's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
If your site in Yate is listed or inside a conservation area, check with the local planning authority (South Gloucestershire Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Verges on rural lanes and estates often carry water mains, telecoms cables and drainage, so services are checked before augering. Tree roots are common along verges and parks, and digging close to mature trees can harm them, so positions are adjusted to stay outside root areas where possible.
- Leave pedestrian gaps of typically at least 1,000–1,200 mm, and wider at path entrances used by cycles, buggies and mobility scooters, referring to Inclusive Mobility guidance.
- Fit reflective bands or white tops where posts stand beside roads or in unlit car parks.
What happens on site
Set out the line
Posts are set out at spacings that stop cars passing between them while leaving gaps for walkers, buggies and wheelchairs.
Set the posts
Posts are set plumb and to a consistent height, backfilled with compacted stone or concreted with a shaped top. Cut softwood ends are re-treated.
Finish and tidy
Reflective bands are fitted, turf is reinstated around the posts and spoil is removed or spread as agreed.
Options to consider
| Option | Detail |
|---|---|
| Treated softwood | Pressure-treated pine for ground contact, economical for long runs on verges and rural sites. |
| Sizes and profiles | Commonly 100–200 mm square or round, with chamfered, pyramid or domed tops to shed water. |
| Removable and lockable posts | Timber posts in steel sockets, or hinged timber posts, for maintenance and emergency access. |
Pricing timber bollards in Yate
Two Yate jobs with the same number of posts can price quite differently. The usual reasons:
- Post size and length
- Removable or hinged posts for access
- Species: treated softwood, oak or tropical hardwood
Keeping them working
New oak can release tannin that stains nearby paving for the first season; this weathers away. Replacing individual damaged posts is straightforward if the original size and species are recorded.
We can also service, repair or replace existing posts anywhere in Yate.
Timber bollards in Yate: FAQs
Do you install timber bollards in Yate?
We cover all of Yate (BS37, GL9 and GL12) and the rest of Gloucestershire. We also work in Mangotsfield, Kingswood and Bristol.
Who gives permission for bollards on the pavement in Yate?
The highway authority for local roads in Yate is South Gloucestershire Council; motorways and trunk roads sit with National Highways. Timber bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for timber bollards in Yate?
In Yate, typically £95–£345 per post, supplied and installed, plus VAT (£105–£405 including VAT for homeowners), with a minimum job of £445 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Should timber posts be set in concrete?
Only with care. Concrete holds the post firmly but can trap water around it at ground level, where rot starts. A free-draining base and a concrete collar shaped to shed water help, and compacted stone backfill is often better in clay.
Do timber bollards stop vehicles?
They stop most drivers deliberately mounting a verge and resist low-speed knocks, especially in dense hardwood. They are not tested barriers and should not be relied on against a vehicle driven at them deliberately.
Timber bollards in nearby towns
- Mangotsfield (5.2 mi)
- Kingswood (7.2 mi)
- Bristol (9.7 mi)
- Bath (11.7 mi)
- Chippenham (13.8 mi)
- Portishead (15.6 mi)