London · England
Timber bollard installation in Wandsworth
Timber bollards supplied and fitted in Wandsworth, London: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout timber bollards in Wandsworth
In the borough of Wandsworth, timber bollards tend to go in at school gates, hospital approaches and places of worship. Oak, hardwood and treated softwood bollards for parks, verges, rural sites, car parks and school frontages.
We cover Wandsworth's SW18, SW15, SW11, SW17 and SW12 postcode districts, including places such as Putney. Nearby, we also work in Merton (2.9 miles), Lambeth (3.4 miles), Hammersmith and Fulham (3.6 miles) and Kensington and Chelsea (3.6 miles), measured as the crow flies.
Wandsworth at a glance
- Area
- London, England
- Highway authority
- Wandsworth Council (local roads)
- Planning authority
- Wandsworth Council
- Postcodes
- SW18, SW15, SW11, SW17 and SW12
- Guide price
- Typically £105–£395 per post + VAT (£125–£465 inc VAT for homes); minimum job £505
- Survey
- Free, with a fixed written quote
- Nearby
- Merton (2.9 mi), Lambeth (3.4 mi), Hammersmith and Fulham (3.6 mi), Kensington and Chelsea (3.6 mi)
Wandsworth: typical timber bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £105–£235 + VAT · £125–£275 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £195–£315 + VAT · £225–£375 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £285–£395 + VAT · £335–£465 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post, supplied and installed; +15% for London. Guide only — the fixed price follows a survey.
Where timber bollards go in around Wandsworth
Common uses in a place like Wandsworth:
- Country parks, nature reserves and woodland car parks
- Footpath and bridleway entrances
- Verges on estates and rural lanes
Before we dig in Wandsworth
The highway authority for local roads in Wandsworth is Wandsworth Council; motorways and trunk roads sit with National Highways. Red routes are managed by Transport for London. Timber bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Wandsworth is listed or inside a conservation area, check with the local planning authority (Wandsworth Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Turf around new posts is reinstated and, on sites used by mowers, posts are spaced so equipment can pass. Clay holds water against the timber and benefits from a free-draining stone base; sandy ground may need a concrete surround to stop posts loosening.
- Keep emergency vehicle access available, using a removable or hinged post where a route must open.
- Check whether the verge is highway land; posts there usually need the highway authority's agreement.
How the job runs
Survey the setting
A free site survey looks at the ground, drainage, tree roots, how vehicles currently get onto the land and how the site looks. You receive a fixed written quote with species, size and fixing.
Set out the line
Posts are set out at spacings that stop cars passing between them while leaving gaps for walkers, buggies and wheelchairs.
Finish and tidy
Reflective bands are fitted, turf is reinstated around the posts and spoil is removed or spread as agreed.
Options to consider
| Option | Detail |
|---|---|
| Sizes and profiles | Commonly 100–200 mm square or round, with chamfered, pyramid or domed tops to shed water. |
| Treated softwood | Pressure-treated pine for ground contact, economical for long runs on verges and rural sites. |
| Oak | Naturally durable heartwood that weathers to silver-grey. Suits parks, heritage settings and visible frontages. |
What affects the quote
Two Wandsworth jobs with the same number of posts can price quite differently. The usual reasons:
- Fixing method: stone, concrete or steel shoe
- Removable or hinged posts for access
- Post size and length
After installation
Replacing individual damaged posts is straightforward if the original size and species are recorded. Inspect posts at ground level, where rot starts, by probing for soft wood.
We can also service, repair or replace existing posts anywhere in Wandsworth.
Common questions
Can you install timber bollards anywhere in Wandsworth?
We cover all of Wandsworth (SW18, SW15, SW11, SW17 and SW12) and the rest of London. We also work in Merton, Lambeth and Hammersmith and Fulham.
Who gives permission for bollards on the pavement in Wandsworth?
The highway authority for local roads in Wandsworth is Wandsworth Council; motorways and trunk roads sit with National Highways. Red routes are managed by Transport for London. Timber bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for timber bollards in Wandsworth?
In Wandsworth, typically £105–£395 per post, supplied and installed, plus VAT (£125–£465 including VAT for homeowners), with a minimum job of £505 plus VAT, using our London guide prices. The fixed figure comes in writing after we've seen the site.
Why is my new oak bollard cracking?
Oak shrinks as it dries, and surface checks and splits are a normal part of that. They rarely affect the post's strength. Deep splits that run right through, or soft wood at the base, are a different matter.
Do timber bollards stop vehicles?
They stop most drivers deliberately mounting a verge and resist low-speed knocks, especially in dense hardwood. They are not tested barriers and should not be relied on against a vehicle driven at them deliberately.
Timber bollards near Wandsworth
- Merton (2.9 mi)
- Lambeth (3.4 mi)
- Hammersmith and Fulham (3.6 mi)
- Kensington and Chelsea (3.6 mi)
- Richmond upon Thames (3.9 mi)
- Westminster (4.6 mi)