Northamptonshire · England
Warehouse and loading-bay bollards in Wellingborough
Planning warehouse impact bollards in Wellingborough? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageWellingborough warehouse impact bollards
In the town of Wellingborough, warehouse impact bollards tend to go in at filling-station forecourts, local parades and high street shopfronts. Yellow steel and polymer impact bollards for forklift zones, loading bays, doors, columns and racking inside warehouses.
We cover Wellingborough's NN8 and NN29 postcode districts, including places such as Little Irchester, Wollaston, Irchester and Bozeat. We also cover neighbouring Rushden (4 miles), Kettering (6.7 miles), Northampton (8.8 miles) and Corby (13.4 miles) — distances are straight-line. It sits roughly 9 miles from Northampton as the crow flies.
Key facts for this area
- Area
- Northamptonshire, England
- Highway authority
- North Northamptonshire Council (local roads)
- Planning authority
- North Northamptonshire Council
- Postcodes
- NN8 and NN29
- Guide price
- Typically £175–£1,195 per bollard + VAT; minimum job £435
- Survey
- Free, with a fixed written quote
- Nearby
- Rushden (4 mi), Kettering (6.7 mi), Northampton (8.8 mi), Corby (13.4 mi)
What Wellingborough sites use warehouse impact bollards for
Around Wellingborough, warehouse impact bollards usually solve one of these:
- Pedestrian crossings and the ends of walkways
- Sprinkler risers, electrical panels and gas meters
- Building columns in forklift aisles and turning areas
Guide prices for Wellingborough
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £175–£595 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £475–£895 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £775–£1,195 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; -2% for East Midlands. Guide only — the fixed price follows a survey.
Permissions and groundwork in Wellingborough
North Northamptonshire Council is the highway authority covering Wellingborough's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (North Northamptonshire Council) first — we flag this at survey.
Anchors need enough edge distance from slab joints and cracks or they will split the concrete on first impact. Where a slab is too thin or poor, the options include through-bolting, a larger base plate to spread load, a polymer bollard that reduces anchor forces, or breaking out and casting a new local foundation.
- Where impact performance matters, ask for products tested to PAS 13 and match the stated performance to your vehicles.
- Use your workplace transport risk assessment to decide where protection is needed, in line with HSE guidance on workplace transport.
What happens on site
Walk the site with the vehicles running
At the free site survey we watch traffic routes, note the vehicles and loads, and look for existing damage that shows where impacts happen. You receive a fixed written quote with each position and product listed.
Check the slab
Slab thickness, joints, cracks and any underfloor services or heating are checked, and anchors are chosen for the floor rather than taken from a standard list.
Drill and anchor
Holes are drilled, cleaned and anchors installed to the maker's instructions. Chemical anchors are left to cure before the bollard is loaded.
Finishes and options
| Option | Detail |
|---|---|
| Diameters and heights | Commonly 114–273 mm diameter and around 600–1,200 mm high, chosen for vehicle type and mast or fork height. |
| Door frame protection | Bollards or low barriers either side of dock doors and roller shutters to protect frames and guides. |
| Cast-in or base-plated | Base plates suit existing slabs. External yard posts can be cast into concrete foundations for heavier duty. |
Pricing warehouse impact bollards in Wellingborough
Two Wellingborough jobs with the same number of posts can price quite differently. The usual reasons:
- Slab condition and the anchors or foundations it needs
- Steel or polymer bollards and the impact performance needed
- Removal of damaged existing protection
Looking after them
On steel bollards look for bending, cracked welds, loose or sheared anchors and cracked concrete around the base plate. Persistent strikes in one place often mean the route or turning space needs changing rather than heavier protection.
We can also service, repair or replace existing posts anywhere in Wellingborough.
Warehouse bollards in Wellingborough: FAQs
Can you install warehouse impact bollards anywhere in Wellingborough?
We cover all of Wellingborough (NN8 and NN29) and the rest of Northamptonshire. We also work in Rushden, Kettering and Northampton.
Who gives permission for bollards on the pavement in Wellingborough?
In Wellingborough, work on adopted pavements and verges needs consent from North Northamptonshire Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do warehouse impact bollards cost in Wellingborough?
In Wellingborough, typically £175–£1,195 per bollard, supplied and fixed, plus VAT, with a minimum job of £435 plus VAT, using our East Midlands guide prices. The fixed figure comes in writing after we've seen the site.
Should we choose steel or polymer warehouse bollards?
Steel suits lighter traffic and sound, thick slabs where cost matters most. Polymer suits busy forklift areas where repeated impacts would destroy anchors and floors. Polymer often costs more to buy but less to keep in service.
What size bollard do we need for forklifts?
That depends on the forklift's weight with load and how fast it travels near the asset, not just the post diameter. Tested products state their impact performance, which can be compared with your fleet. We size from your vehicles at the survey.
Warehouse bollards in nearby towns
- Rushden (4 mi)
- Kettering (6.7 mi)
- Northampton (8.8 mi)
- Corby (13.4 mi)
- Bedford (15.1 mi)
- Market Harborough (15.4 mi)