Somerset · England
Warehouse and loading-bay bollards in Taunton
Warehouse impact bollards supplied and fitted in Taunton, Somerset: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageTaunton warehouse impact bollards
We supply and fit warehouse impact bollards throughout Taunton, typically for sites such as community buildings, schools and filling-station forecourts. Yellow steel and polymer impact bollards for forklift zones, loading bays, doors, columns and racking inside warehouses.
We cover Taunton's TA1, TA2 and TA3 postcode districts, including places such as Monkton Heathfield, Norton Fitzwarren, Bathpool and Staplegrove. Nearby, we also work in Bridgwater (8.9 miles), Burnham-on-Sea (16.1 miles), Tiverton (18.6 miles) and Yeovil (21.1 miles), measured as the crow flies. Taunton is about 37 miles from Bristol.
Local details
- Area
- Somerset, England
- Highway authority
- Somerset Council (local roads)
- Planning authority
- Somerset Council
- Postcodes
- TA1, TA2 and TA3
- Guide price
- Typically £175–£1,195 per bollard + VAT; minimum job £445
- Survey
- Free, with a fixed written quote
- Nearby
- Bridgwater (8.9 mi), Burnham-on-Sea (16.1 mi), Tiverton (18.6 mi), Yeovil (21.1 mi)
Guide prices for Taunton
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £175–£605 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £485–£905 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £785–£1,195 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; no regional adjustment. Guide only — the fixed price follows a survey.
Typical warehouse impact bollards jobs in Taunton
Around Taunton, warehouse impact bollards usually solve one of these:
- Pedestrian crossings and the ends of walkways
- Charging stations for forklifts and pallet trucks
- Building columns in forklift aisles and turning areas
Permissions and groundwork in Taunton
The highway authority for local roads in Taunton is Somerset Council; motorways and trunk roads sit with National Highways. Warehouse impact bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Taunton is listed or inside a conservation area, check with the local planning authority (Somerset Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Where a slab is too thin or poor, the options include through-bolting, a larger base plate to spread load, a polymer bollard that reduces anchor forces, or breaking out and casting a new local foundation. Anchors need enough edge distance from slab joints and cracks or they will split the concrete on first impact.
- Use your workplace transport risk assessment to decide where protection is needed, in line with HSE guidance on workplace transport.
- Keep fire exits, escape routes and fire equipment accessible; bollards must not narrow escape routes below their required width.
What happens on site
Walk the site with the vehicles running
At the free site survey we watch traffic routes, note the vehicles and loads, and look for existing damage that shows where impacts happen. You receive a fixed written quote with each position and product listed.
Check the slab
Slab thickness, joints, cracks and any underfloor services or heating are checked, and anchors are chosen for the floor rather than taken from a standard list.
Drill and anchor
Holes are drilled, cleaned and anchors installed to the maker's instructions. Chemical anchors are left to cure before the bollard is loaded.
Options to consider
| Option | Detail |
|---|---|
| Polymer impact bollards | Flex and recover on impact, reducing damage to anchors, floor and vehicle. Need clearance to deflect. |
| Cast-in or base-plated | Base plates suit existing slabs. External yard posts can be cast into concrete foundations for heavier duty. |
| Steel bollards | Yellow-coated steel tube on a base plate, often concrete-filled. Robust and economical, but they pass impact loads straight into the slab. |
Pricing warehouse impact bollards in Taunton
Two Taunton jobs with the same number of posts can price quite differently. The usual reasons:
- Number of positions and types of guard
- Slab condition and the anchors or foundations it needs
- Out-of-hours or phased working around operations
Looking after them
Polymer bollards should return to their original shape; one that stays deformed or has split needs replacing. Persistent strikes in one place often mean the route or turning space needs changing rather than heavier protection.
We can also service, repair or replace existing posts anywhere in Taunton.
Warehouse bollards in Taunton: FAQs
Can you install warehouse impact bollards anywhere in Taunton?
We cover all of Taunton (TA1, TA2 and TA3) and the rest of Somerset. We also work in Bridgwater, Burnham-on-Sea and Tiverton.
Do I need consent for warehouse impact bollards on a public footway in Taunton?
Somerset Council is the highway authority covering Taunton's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for warehouse impact bollards in Taunton?
In Taunton, typically £175–£1,195 per bollard, supplied and fixed, plus VAT, with a minimum job of £445 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Can you install while the warehouse is operating?
Usually yes, by working zone by zone with each area barriered off, or by working nights or weekends. Drilling dust is controlled near stored goods. We agree the phasing with your site manager.
Should we choose steel or polymer warehouse bollards?
Steel suits lighter traffic and sound, thick slabs where cost matters most. Polymer suits busy forklift areas where repeated impacts would destroy anchors and floors. Polymer often costs more to buy but less to keep in service.