Bollard Installers

England · 13 towns

Warehouse and loading-bay bollards in Tyne and Wear

Warehouse bollards for sites across Tyne and Wear: surveyed, quoted in writing and installed by our crews.

Yellow and black steel impact bollards either side of a warehouse loading-bay door, forklift and racking behindComputer-generated image

Warehouse bollards in Tyne and Wear

We supply and install warehouse impact bollards across Tyne and Wear, with local pages for 13 towns below. Yellow steel and polymer impact bollards for forklift zones, loading bays, doors, columns and racking inside warehouses.

Highway authorities for local roads in Tyne and Wear: Gateshead Council, Newcastle City Council, North Tyneside Council, South Tyneside Council and Sunderland City Council.

Choose your town in Tyne and Wear

Guide prices in Tyne and Wear

SpecificationGuide priceIncludes
Standard£165–£575 + VATStandard post, foundation, reinstatement
Upgraded£465–£875 + VATUpgraded finish or fittings, reflective band, matched keys
Premium£755–£1,145 + VATHeavy-duty or architectural spec, premium finish

Per bollard, supplied and fixed; -4% for North East. Guide only — the fixed price follows a survey.

Highway and planning authorities in Tyne and Wear

TownHighway / roads authorityPlanning authority
Newcastle upon TyneNewcastle City Councilthe council for Newcastle upon Tyne
SunderlandSunderland City CouncilSunderland City Council
South ShieldsSouth Tyneside CouncilSouth Tyneside Council
GatesheadGateshead CouncilGateshead Council
WashingtonSunderland City CouncilSunderland City Council
TynemouthNorth Tyneside CouncilNorth Tyneside Council
WallsendNorth Tyneside CouncilNorth Tyneside Council
North ShieldsNorth Tyneside CouncilNorth Tyneside Council
Whitley BayNorth Tyneside CouncilNorth Tyneside Council
Houghton-le-SpringSunderland City CouncilSunderland City Council
FellingGateshead CouncilGateshead Council
JarrowSouth Tyneside CouncilSouth Tyneside Council
HebburnSouth Tyneside CouncilSouth Tyneside Council

Rules for warehouse impact bollards in England

Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Accessibility guidance asks for posts at least 1,000 mm high with contrasting tops and no chains between them.

Details and sources: bollard rules in England.

How installation works

Walk the site with the vehicles running

At the free site survey we watch traffic routes, note the vehicles and loads, and look for existing damage that shows where impacts happen. You receive a fixed written quote with each position and product listed.

Check the slab

Slab thickness, joints, cracks and any underfloor services or heating are checked, and anchors are chosen for the floor rather than taken from a standard list.

Plan around operations

Work is phased by aisle or zone, or done out of hours, with each area barriered off while drilling. Dust is controlled with extraction where products are stored nearby.

Drill and anchor

Holes are drilled, cleaned and anchors installed to the maker's instructions. Chemical anchors are left to cure before the bollard is loaded.

Warehouse bollards in Tyne and Wear: FAQs

Do you cover all of Tyne and Wear for warehouse impact bollards?

Yes — including Newcastle upon Tyne, Sunderland, South Shields, Gateshead, Washington, Tynemouth, Wallsend and North Shields. Enter your postcode in the price calculator to confirm.

How much do warehouse impact bollards cost in Tyne and Wear?

In Tyne and Wear, typically £165–£1,145 per bollard, supplied and fixed, plus VAT, with a minimum job of £425 plus VAT, using our North East guide prices. The fixed figure comes in writing after we've seen the site.

Who do I ask about bollards on public land in Tyne and Wear?

For local roads, Gateshead Council, Newcastle City Council, North Tyneside Council, South Tyneside Council and Sunderland City Council; National Highways covers motorways and trunk roads. Bollards on adopted highway need the highway authority's written agreement.

Should we choose steel or polymer warehouse bollards?

Steel suits lighter traffic and sound, thick slabs where cost matters most. Polymer suits busy forklift areas where repeated impacts would destroy anchors and floors. Polymer often costs more to buy but less to keep in service.

Can bollards be fixed to a thin warehouse floor?

Sometimes, using larger base plates, through-bolts or polymer bollards that reduce anchor loads. If the slab is too thin or damaged, a new local foundation may be needed. We check the slab before recommending a fixing.

Other services in Tyne and Wear

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote