Aberdeen City · Scotland
Automatic bollard repairs in Aberdeen
Auto bollard repairs for sites in Aberdeen and the rest of Aberdeen City, by crews working under our management.
Computer-generated imageAuto bollard repairs in Aberdeen
We carry out auto bollard repairs throughout Aberdeen, typically for pedestrianised streets, office forecourts and stadium approaches. Paid repair visits for rising bollards: hydraulics, motors, controllers, loops, flooded pits and heads damaged by vehicles.
We cover every part of Aberdeen in the AB11, AB25, AB10, AB24, AB16 and AB15 postcode districts. Nearby, we also work in Cove (3.1 miles), Westhill (6.8 miles), Stonehaven (13.2 miles) and Inverurie (14.3 miles), measured as the crow flies.
Aberdeen at a glance
- Area
- Aberdeen City, Scotland
- Roads authority
- Aberdeen City Council (local roads)
- Planning authority
- Aberdeen City Council
- Postcodes
- AB11, AB25, AB10, AB24, AB16, AB15, AB12 and AB22
- Guide price
- Typically £145–£2,495 per repair + VAT
- Survey
- Paid visit, price confirmed in writing first
- Nearby
- Cove (3.1 mi), Westhill (6.8 mi), Stonehaven (13.2 mi), Inverurie (14.3 mi)
Aberdeen: typical automatic bollard repair prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £145–£1,145 + VAT | Diagnostic visit and minor fault fix |
| Upgraded | £855–£1,845 + VAT | Component repair: loop, controller or photocell |
| Premium | £1,545–£2,495 + VAT | Major part: hydraulic unit, ram or bollard head |
Per repair, from a diagnostic visit to a replacement hydraulic unit or head; no regional adjustment. Guide only — the visit price is confirmed in writing first.
Common reasons for auto bollard repairs in Aberdeen
What auto bollard repairs usually sort out in Aberdeen:
- Flooded pits after heavy rain
- Heads and covers damaged by a vehicle strike
- Slow, jerky or noisy rising and lowering
Permissions and groundwork in Aberdeen
Aberdeen falls under Aberdeen City Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
If your site in Aberdeen is listed or inside a conservation area, check with the local planning authority (Aberdeen City Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Pits flood when drains silt up, soakaways fail or pipes collapse, and the repair may involve jetting or relaying a drain as well as replacing water-damaged parts. Where a vehicle impact has cracked the cassette's foundation, the concrete may need breaking out and recasting before the bollard can safely return to use.
- Collect and clean up hydraulic fluid leaks properly to avoid contaminating drains and ground.
- Do not keep a bollard in service with faulty or bypassed safety devices; make it safe and lock it down or out of use until repaired.
From survey to handover
Diagnose the cause
Fault logs, loops, drive, electrics and pit are checked in turn to find the underlying cause rather than just the symptom.
Quote and repair
Simple faults within the visit are fixed on the day. Where parts or further work are needed, we quote them in writing and complete the repair once approved.
Test and report
After the repair, every safety device and access input is tested with vehicles, and you receive a written report of the fault, cause and work done.
Choosing the right spec
| Option | Detail |
|---|---|
| Pit and drainage | Pumping out flooded cassettes, clearing drains and repairing failed outlets. |
| Heads and covers | Replacement heads, covers, reflective bands and light rings after impact damage. |
| Hydraulic repairs | Seals, hoses, valves, pumps and power packs, with fluid topped up or replaced and leaks cleaned up properly. |
What moves the price in Aberdeen
Our Scotland guide prices are a starting point; the survey in Aberdeen firms them up. What tends to move them:
- Nature of the fault and time needed to diagnose it
- Loop replacement and surface repairs
- Hydraulic or electro-mechanical drive
After installation
Tell anyone resurfacing or digging nearby where loops, ducts and drains run. After a repair, consider a planned maintenance arrangement if the bollard has no service history.
For damaged or loose posts in Aberdeen, repairs and replacements are priced in writing first.
Auto bollard repairs in Aberdeen: FAQs
Which parts of Aberdeen do you cover for auto bollard repairs?
We cover all of Aberdeen (AB11, AB25, AB10, AB24, AB16 and AB15) and the rest of Aberdeen City. We also work in Cove, Westhill and Stonehaven.
Do I need consent for bollards on a public footway in Aberdeen?
Aberdeen falls under Aberdeen City Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
How much do auto bollard repairs cost in Aberdeen?
In Aberdeen, typically £145–£2,495 per repair, from a diagnostic visit to a replacement hydraulic unit or head, plus VAT, using our Scotland guide prices. We confirm the visit price in writing before attending.
Why does our bollard rise and fall by itself?
Usually because a loop or its detector is faulty, or an access device is sending repeated signals. Damaged road surfaces and water in loop cuts are common causes. Diagnosis checks the loops first.
Our bollard rose under a car: what happens next?
Take it out of service and keep it lowered or secured. The safety loops, photocells and settings are checked to find out why it rose, and the damage is assessed. It should not return to use until the cause is fixed and the risk assessment reviewed.