Aberdeen City · Scotland
Steel security bollard installation in Aberdeen
Steel security bollards supplied and fitted in Aberdeen, Aberdeen City: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAberdeen steel security bollards
We supply and fit steel security bollards throughout Aberdeen, typically for sites such as university campuses, pedestrianised streets and retail parks. Unrated steel bollards have not been crash-tested, so they deter vehicles and stop low-speed knocks and casual misuse rather than a determined attack.
We cover every part of Aberdeen in the AB11, AB25, AB10, AB24, AB16 and AB15 postcode districts. We also cover neighbouring Cove (3.1 miles), Westhill (6.8 miles), Stonehaven (13.2 miles) and Inverurie (14.3 miles) — distances are straight-line.
Local details
- Area
- Aberdeen City, Scotland
- Roads authority
- Aberdeen City Council (local roads)
- Planning authority
- Aberdeen City Council
- Postcodes
- AB11, AB25, AB10, AB24, AB16, AB15, AB12 and AB22
- Guide price
- Typically £195–£895 per bollard + VAT (£225–£1,045 inc VAT for homes); minimum job £595
- Survey
- Free, with a fixed written quote
- Nearby
- Cove (3.1 mi), Westhill (6.8 mi), Stonehaven (13.2 mi), Inverurie (14.3 mi)
Typical steel security bollards jobs in Aberdeen
Typical reasons Aberdeen sites choose steel security bollards:
- Car park perimeters, end-of-bay protection and walkway edges
- Stopping cut-through traffic on private roads and estates
- Social housing estates with nuisance parking
Guide prices for Aberdeen
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £195–£485 + VAT · £225–£575 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £405–£695 + VAT · £485–£825 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £615–£895 + VAT · £735–£1,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Permissions and groundwork in Aberdeen
Aberdeen falls under Aberdeen City Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
Many private-land installations in Aberdeen need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Aberdeen City Council before posts go in.
Service runs commonly follow kerb lines and verges, which is exactly where steel posts tend to go, so positions are checked with records and scanning before digging. Reinstatement matches the surface, whether tarmac, block paving, flags or turf.
- Check whether the land is public highway or adopted verge before installing; the roads authority's agreement is usually needed.
- Fit contrasting or reflective bands near the top so posts are visible, as Inclusive Mobility guidance recommends.
How the job runs
Survey and set out
A free site survey confirms positions, surfaces, buried services and whether root-fixing or base plates suit the ground. You receive a fixed written quote listing post size, finish and fixing.
Break out and excavate
For root-fixed posts, the surface is cut neatly and each hole is dug to depth, by hand near known services. For base plates, the slab is checked for thickness and soundness.
Fill and cap
Where specified, posts are filled with concrete and capped so water cannot collect inside the tube.
Choosing the right spec
| Option | Detail |
|---|---|
| Root-fixed | Cast into a concrete foundation, typically with several hundred millimetres of post below ground. The usual choice where digging is possible. |
| Visibility bands | Reflective or contrasting bands near the top for drivers at night and for partially sighted pedestrians. |
| Tube size and wall thickness | Common diameters include 76, 114, 140, 168 and 219 mm, with heavier walls for service yards and vehicle routes. |
What affects the quote
When we price steel security bollards in Aberdeen, these make the biggest difference:
- Finish: galvanised only or powder-coated
- Ground conditions and buried services
- Surface reinstatement such as block paving or tarmac
Looking after them
Check periodically for impact damage, loose base plates and cracked surfacing around the root. Reflective bands fade and peel and are easy to renew.
We can also service, repair or replace existing posts anywhere in Aberdeen.
Steel security bollards in Aberdeen: FAQs
Which parts of Aberdeen do you cover for steel security bollards?
We cover all of Aberdeen (AB11, AB25, AB10, AB24, AB16 and AB15) and the rest of Aberdeen City. We also work in Cove, Westhill and Stonehaven.
Do I need consent for steel security bollards on a public footway in Aberdeen?
Aberdeen falls under Aberdeen City Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
What's a typical price for steel security bollards in Aberdeen?
In Aberdeen, typically £195–£895 per bollard, supplied and installed, plus VAT (£225–£1,045 including VAT for homeowners), with a minimum job of £595 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Can new posts match our existing ones?
Usually, if we can measure the existing diameter, height, cap and colour. Galvanised steel in standard sizes is easy to match; older or unusual sections may need a close equivalent.
Are unrated steel bollards anti-ram?
No. They have not been crash-tested, so their performance against a deliberate vehicle attack is unknown. They are suited to nuisance parking and low-speed knocks; tested products are needed where an attack is the concern.