Bridgend · Wales
Automatic bollard repairs in Bridgend
Auto bollard repairs for sites in Bridgend and the rest of the surrounding area, by crews working under our management.
Computer-generated imageAbout auto bollard repairs in Bridgend
For small industrial units, community car parks and schools in Bridgend, regular attention keeps existing bollards working safely. Each repair visit is paid and priced in writing before work begins.
Coverage in Bridgend takes in the CF31, CF35 and CF32 postcode districts and nearby places like Pen-y-fai, Hernston, Pencoed and Heol-y-Cyw. Nearby, we also work in Pyle (5.3 miles), Porthcawl (5.7 miles), Llantwit Major (7.6 miles) and Maesteg (7.9 miles), measured as the crow flies. It sits roughly 17 miles from Cardiff as the crow flies.
Key facts for this area
- Area
- Bridgend, Wales
- Highway authority
- Bridgend County Borough Council (local roads)
- Planning authority
- Bridgend County Borough Council
- Postcodes
- CF31, CF35 and CF32
- Guide price
- Typically £145–£2,445 per repair + VAT
- Survey
- Paid visit, price confirmed in writing first
- Nearby
- Pyle (5.3 mi), Porthcawl (5.7 mi), Llantwit Major (7.6 mi), Maesteg (7.9 mi)
What auto bollard repairs cost in Bridgend
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £145–£1,095 + VAT | Diagnostic visit and minor fault fix |
| Upgraded | £825–£1,795 + VAT | Component repair: loop, controller or photocell |
| Premium | £1,495–£2,445 + VAT | Major part: hydraulic unit, ram or bollard head |
Per repair, from a diagnostic visit to a replacement hydraulic unit or head; -3% for Wales. Guide only — the visit price is confirmed in writing first.
Common reasons for auto bollard repairs in Bridgend
Typical reasons for auto bollard repairs in Bridgend:
- Flooded pits after heavy rain
- Bollards that rise or fall on their own
- Hydraulic oil leaks around the head or pit
What we check first in Bridgend
Before digging near the kerb in Bridgend we establish who owns the ground: adopted footways are Bridgend County Borough Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
If your site in Bridgend is listed or inside a conservation area, check with the local planning authority (Bridgend County Borough Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Pits flood when drains silt up, soakaways fail or pipes collapse, and the repair may involve jetting or relaying a drain as well as replacing water-damaged parts. Loops fail when surfaces crack, sink or are patched; replacing a loop in a broken surface without repairing the surface first just leads to another failure.
- After an incident where a bollard struck a vehicle or person, revisit the risk assessment and safety settings before returning it to use.
- For crash-rated automatic bollards, involve the manufacturer where repairs could affect tested performance.
What happens on site
Agree the visit price
We confirm the cost of the diagnostic and repair visit in writing. Nothing is done until you have agreed it.
Quote and repair
Simple faults within the visit are fixed on the day. Where parts or further work are needed, we quote them in writing and complete the repair once approved.
Test and report
After the repair, every safety device and access input is tested with vehicles, and you receive a written report of the fault, cause and work done.
Specification choices
| Option | Detail |
|---|---|
| Electro-mechanical repairs | Motors, gearboxes, couplings, position sensors and limit switches. |
| Pit and drainage | Pumping out flooded cassettes, clearing drains and repairing failed outlets. |
| Hydraulic repairs | Seals, hoses, valves, pumps and power packs, with fluid topped up or replaced and leaks cleaned up properly. |
What affects the quote
Two Bridgend jobs with the same number of posts can price quite differently. The usual reasons:
- Parts required and their availability
- Loop replacement and surface repairs
- Hydraulic or electro-mechanical drive
After installation
After a repair, consider a planned maintenance arrangement if the bollard has no service history. Tell anyone resurfacing or digging nearby where loops, ducts and drains run.
If posts in Bridgend are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Can you carry out auto bollard repairs anywhere in Bridgend?
We cover all of Bridgend (CF31, CF35 and CF32). We also work in Pyle, Porthcawl and Llantwit Major.
Do I need consent for bollards on a public footway in Bridgend?
Local roads and pavements in Bridgend are the responsibility of Bridgend County Borough Council as highway authority, with the Welsh Government's trunk road agents handling trunk roads. Posts on the public highway need that authority's consent; private land does not.
What's a typical price for auto bollard repairs in Bridgend?
In Bridgend, typically £145–£2,445 per repair, from a diagnostic visit to a replacement hydraulic unit or head, plus VAT, using our Wales guide prices. We confirm the visit price in writing before attending.
Our bollard rose under a car: what happens next?
Take it out of service and keep it lowered or secured. The safety loops, photocells and settings are checked to find out why it rose, and the damage is assessed. It should not return to use until the cause is fixed and the risk assessment reviewed.
Why does our bollard rise and fall by itself?
Usually because a loop or its detector is faulty, or an access device is sending repeated signals. Damaged road surfaces and water in loop cuts are common causes. Diagnosis checks the loops first.
Auto bollard repairs near Bridgend
- Pyle (5.3 mi)
- Porthcawl (5.7 mi)
- Llantwit Major (7.6 mi)
- Maesteg (7.9 mi)
- Llantrisant (9.1 mi)
- Port Talbot (11.2 mi)