Bridgend · Wales
Automatic bollard repairs in Porthcawl
Local auto bollard repairs across Porthcawl — we diagnose, explain and price in writing before doing more.
Computer-generated imageAbout auto bollard repairs in Porthcawl
In Porthcawl, typical sites for auto bollard repairs include high street shopfronts, town-centre squares and community car parks. Each repair visit is paid and priced in writing before work begins.
Coverage in Porthcawl takes in the CF36 postcode district. We also cover neighbouring Pyle (2.6 miles), Bridgend (5.7 miles), Port Talbot (8.7 miles) and Maesteg (9.2 miles) — distances are straight-line. Porthcawl is about 14 miles from Swansea.
Key facts for this area
- Area
- Bridgend, Wales
- Highway authority
- Bridgend County Borough Council (local roads)
- Planning authority
- Bridgend County Borough Council
- Postcodes
- CF36
- Guide price
- Typically £145–£2,445 per repair + VAT
- Survey
- Paid visit, price confirmed in writing first
- Nearby
- Pyle (2.6 mi), Bridgend (5.7 mi), Port Talbot (8.7 mi), Maesteg (9.2 mi)
Typical auto bollard repairs requests in Porthcawl
Typical reasons for auto bollard repairs in Porthcawl:
- Flooded pits after heavy rain
- Heads and covers damaged by a vehicle strike
- Loops cut or damaged during resurfacing
Porthcawl: typical automatic bollard repair prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £145–£1,095 + VAT | Diagnostic visit and minor fault fix |
| Upgraded | £825–£1,795 + VAT | Component repair: loop, controller or photocell |
| Premium | £1,495–£2,445 + VAT | Major part: hydraulic unit, ram or bollard head |
Per repair, from a diagnostic visit to a replacement hydraulic unit or head; -3% for Wales. Guide only — the visit price is confirmed in writing first.
Permissions and groundwork in Porthcawl
Before digging near the kerb in Porthcawl we establish who owns the ground: adopted footways are Bridgend County Borough Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
If your site in Porthcawl is listed or inside a conservation area, check with the local planning authority (Bridgend County Borough Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Resurfacing contractors often cut through loops and ducts without realising they are there, so it is worth pointing them out before any roadworks. Many automatic bollard faults start in the ground.
- After an incident where a bollard struck a vehicle or person, revisit the risk assessment and safety settings before returning it to use.
- For crash-rated automatic bollards, involve the manufacturer where repairs could affect tested performance.
Installation, step by step
Describe the fault
Tell us what the bollard is doing, any lights or messages on the controller, recent weather or roadworks, and send photographs of the bollard, pit and controller.
Quote and repair
Simple faults within the visit are fixed on the day. Where parts or further work are needed, we quote them in writing and complete the repair once approved.
Test and report
After the repair, every safety device and access input is tested with vehicles, and you receive a written report of the fault, cause and work done.
Options to consider
| Option | Detail |
|---|---|
| Make safe | Locking the bollard down or securing it up, with cones and signs, so the entrance is safe while a repair is arranged. |
| Pit and drainage | Pumping out flooded cassettes, clearing drains and repairing failed outlets. |
| Hydraulic repairs | Seals, hoses, valves, pumps and power packs, with fluid topped up or replaced and leaks cleaned up properly. |
What affects the quote
When we price auto bollard repairs in Porthcawl, these make the biggest difference:
- Impact damage to heads, cassettes or foundations
- Loop replacement and surface repairs
- Parts required and their availability
Keeping them working
Tell anyone resurfacing or digging nearby where loops, ducts and drains run. Many repairs could be avoided by regular servicing, which catches blocked drains, weeping seals and failing loops early.
If posts in Porthcawl are later hit or damaged, we can repair or replace them — see bollard repairs.
Auto bollard repairs in Porthcawl: FAQs
Which parts of Porthcawl do you cover for auto bollard repairs?
We cover all of Porthcawl (CF36) and the rest of Bridgend. We also work in Pyle, Bridgend and Port Talbot.
Who gives permission for bollards on the pavement in Porthcawl?
Before digging near the kerb in Porthcawl we establish who owns the ground: adopted footways are Bridgend County Borough Council's responsibility, trunk roads the Welsh Government's, and everything else belongs to the site owner.
What's a typical price for auto bollard repairs in Porthcawl?
In Porthcawl, typically £145–£2,445 per repair, from a diagnostic visit to a replacement hydraulic unit or head, plus VAT, using our Wales guide prices. We confirm the visit price in writing before attending.
Can you repair automatic bollards you did not install?
Yes, for common makes of hydraulic and electro-mechanical bollard. Some parts are proprietary and sourced through the manufacturer or distributor. Make and model details help us prepare.
Roadworks cut our loops: can they be replaced?
Yes. New loops are cut into the sound surface, connected and the detectors retuned. If the surface around them is damaged, it is repaired first so the new loops last.
Auto bollard repairs in nearby towns
- Pyle (2.6 mi)
- Bridgend (5.7 mi)
- Port Talbot (8.7 mi)
- Maesteg (9.2 mi)
- Llantwit Major (10.5 mi)
- Neath (13.4 mi)