Hampshire · England
Automatic bollard repairs in Farnborough
Auto bollard repairs for sites in Farnborough and the rest of Hampshire, by crews working under our management.
Computer-generated imageAbout auto bollard repairs in Farnborough
In Farnborough, typical sites for auto bollard repairs include small industrial units, town-centre squares and filling-station forecourts. Paid repair visits for rising bollards: hydraulics, motors, controllers, loops, flooded pits and heads damaged by vehicles.
We cover every part of Farnborough in the GU14 postcode district. We also cover neighbouring Camberley (3 miles), Aldershot (3.2 miles), Fleet (3.4 miles) and Sandhurst (3.9 miles) — distances are straight-line. Farnborough is about 15 miles from Reading.
Farnborough at a glance
- Area
- Hampshire, England
- Highway authority
- Hampshire County Council (local roads)
- Planning authority
- the council for Rushmoor
- Postcodes
- GU14
- Guide price
- Typically £155–£2,645 per repair + VAT
- Survey
- Paid visit, price confirmed in writing first
Automatic bollard repair prices in Farnborough
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £155–£1,195 + VAT | Diagnostic visit and minor fault fix |
| Upgraded | £905–£1,945 + VAT | Component repair: loop, controller or photocell |
| Premium | £1,645–£2,645 + VAT | Major part: hydraulic unit, ram or bollard head |
Per repair, from a diagnostic visit to a replacement hydraulic unit or head; +6% for South East. Guide only — the visit price is confirmed in writing first.
Common reasons for auto bollard repairs in Farnborough
What auto bollard repairs usually sort out in Farnborough:
- Loops cut or damaged during resurfacing
- Bollards that rise or fall on their own
- Bollards stuck in the raised or lowered position
What we check first in Farnborough
Hampshire County Council is the highway authority covering Farnborough's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
If your site in Farnborough is listed or inside a conservation area, check with the local planning authority (the council for Rushmoor) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Pits flood when drains silt up, soakaways fail or pipes collapse, and the repair may involve jetting or relaying a drain as well as replacing water-damaged parts. Loops fail when surfaces crack, sink or are patched; replacing a loop in a broken surface without repairing the surface first just leads to another failure.
- For crash-rated automatic bollards, involve the manufacturer where repairs could affect tested performance.
- Have electrical repairs carried out by a qualified electrician to BS 7671.
What happens on site
Agree the visit price
We confirm the cost of the diagnostic and repair visit in writing. Nothing is done until you have agreed it.
Diagnose the cause
Fault logs, loops, drive, electrics and pit are checked in turn to find the underlying cause rather than just the symptom.
Test and report
After the repair, every safety device and access input is tested with vehicles, and you receive a written report of the fault, cause and work done.
Options to consider
| Option | Detail |
|---|---|
| Electro-mechanical repairs | Motors, gearboxes, couplings, position sensors and limit switches. |
| Make safe | Locking the bollard down or securing it up, with cones and signs, so the entrance is safe while a repair is arranged. |
| Hydraulic repairs | Seals, hoses, valves, pumps and power packs, with fluid topped up or replaced and leaks cleaned up properly. |
What moves the price in Farnborough
Two Farnborough jobs with the same number of posts can price quite differently. The usual reasons:
- Parts required and their availability
- Drainage repairs or pit pumping
- Impact damage to heads, cassettes or foundations
Looking after them
Tell anyone resurfacing or digging nearby where loops, ducts and drains run. Between visits, keep the bollard head clear, report changes in speed or sound promptly and keep a simple log of faults with times and dates, which speeds diagnosis.
We can also service, repair or replace existing posts anywhere in Farnborough.
Common questions
Can you carry out auto bollard repairs anywhere in Farnborough?
We cover all of Farnborough (GU14) and the rest of Hampshire. We also work in Camberley, Aldershot and Fleet.
Who gives permission for bollards on the pavement in Farnborough?
The highway authority for local roads in Farnborough is Hampshire County Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do auto bollard repairs cost in Farnborough?
In Farnborough, typically £155–£2,645 per repair, from a diagnostic visit to a replacement hydraulic unit or head, plus VAT, using our South East guide prices. We confirm the visit price in writing before attending.
Our bollard rose under a car: what happens next?
Take it out of service and keep it lowered or secured. The safety loops, photocells and settings are checked to find out why it rose, and the damage is assessed. It should not return to use until the cause is fixed and the risk assessment reviewed.
Can you repair automatic bollards you did not install?
Yes, for common makes of hydraulic and electro-mechanical bollard. Some parts are proprietary and sourced through the manufacturer or distributor. Make and model details help us prepare.
Auto bollard repairs in nearby towns
- Camberley (3 mi)
- Aldershot (3.2 mi)
- Fleet (3.4 mi)
- Sandhurst (3.9 mi)
- Yateley (4.7 mi)
- Crowthorne (5.5 mi)