Surrey · England
Automatic bollard servicing in Horley
Automatic bollard service visits for sites in Horley and the rest of Surrey, by crews working under our management.
Computer-generated imageHorley automatic bollard service visits
A service visit cleans and inspects the bollard and cassette, checks the drive, drainage and electrics, and tests every safety device, access control input and emergency function. Around Horley, that usually means sites such as schools, small industrial units and town-centre squares.
We cover the RH6 postcode district in Horley. Nearby, we also work in Crawley (4.4 miles), Redhill (4.6 miles), Reigate (4.8 miles) and East Grinstead (7.5 miles), measured as the crow flies. It sits roughly 24 miles from Brighton as the crow flies.
Key facts for this area
- Area
- Surrey, England
- Highway authority
- Surrey County Council (local roads)
- Planning authority
- the council for Reigate and Banstead
- Postcodes
- RH6
- Guide price
- Typically £105–£365 per visit + VAT
- Survey
- Paid visit, price confirmed in writing first
- Nearby
- Crawley (4.4 mi), Redhill (4.6 mi), Reigate (4.8 mi), East Grinstead (7.5 mi)
Common reasons for automatic bollard service visits in Horley
Typical reasons for automatic bollard service visits in Horley:
- Secure sites with crash-rated automatic bollards
- Systems that have started to run slowly or noisily
- Residential estates with shared automatic bollards
Guide prices for Horley
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £105–£215 + VAT | One bollard, planned service and safety checks |
| Upgraded | £185–£295 + VAT | Two bollards, full service and written report |
| Premium | £265–£365 + VAT | Larger or rated systems to manufacturer procedures |
Per planned service visit, first bollard; +6% for South East. Guide only — the visit price is confirmed in writing first.
What we check first in Horley
The highway authority for local roads in Horley is Surrey County Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Horley need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Reigate and Banstead before posts go in.
Servicing rarely needs excavation, but the condition of the ground around the bollard tells a lot about its health. Drainage outlets are tested by running water into the pit; where they no longer drain, the cause may be a collapsed pipe or a soakaway that has silted up, which may need a separate drainage repair quoted in writing.
- For crash-rated automatic bollards, follow the manufacturer's maintenance requirements so the bollard continues to perform as tested.
- Keep written records of each service, including tests of safety devices and emergency functions.
What happens on site
Tell us about the installation
Send the make and model if known, the number of bollards, how busy the entrance is and any current problems, with photographs of the bollards and controller.
Service and test
The pit, drainage, drive, electrics, safety devices and access inputs are serviced and tested, and the controller log is read.
Report and recommend
You receive a written report of what was checked and found. Any repair needed is quoted separately in writing for your approval.
Choosing the right spec
| Option | Detail |
|---|---|
| Safety and access testing | Loops, photocells, lights, manual release, emergency functions and access control inputs tested on every visit. |
| One-off service visit | A single paid service, useful for bollards with no recent history or before a decision about a contract. |
| Electro-mechanical servicing | Motor, gearbox, couplings and sensor checks, with adjustment of limits and positions. |
Pricing automatic bollard service visits in Horley
Our South East guide prices are a starting point; the survey in Horley firms them up. What tends to move them:
- Visit frequency and contract length
- Traffic management needed on live roads
- Number of bollards and controllers
Looking after them
If the site changes how the entrance is used, such as longer opening hours or heavier delivery vehicles, mention it before the next visit so the service frequency and safety settings can be reconsidered. Between service visits, site staff can do a lot to keep bollards reliable: keep the head and surrounding road clear of leaves and grit, report any change in speed, noise or behaviour, keep a note of faults with the date and time, and never bypass or disconnect safety devices to keep an entrance open.
For damaged or loose posts in Horley, repairs and replacements are priced in writing first.
Common questions
Which parts of Horley do you cover for automatic bollard service visits?
We cover all of Horley (RH6) and the rest of Surrey. We also work in Crawley, Redhill and Reigate.
Do I need consent for bollards on a public footway in Horley?
Surrey County Council is the highway authority covering Horley's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do automatic bollard service visits cost in Horley?
In Horley, typically £105–£365 per planned service visit, first bollard, plus VAT, using our South East guide prices. We confirm the visit price in writing before attending.
How often should automatic bollards be serviced?
It depends on how often they cycle and the risk at the site. Commonly that means every three to six months, with busier or security entrances at the more frequent end. We suggest a frequency once we know your usage.
Is a maintenance contract necessary?
It is not compulsory, but planned visits catch wear before it becomes a breakdown and give you a maintenance record. One-off visits suit lightly used bollards or as a starting point.
Bollard servicing near Horley
- Crawley (4.4 mi)
- Redhill (4.6 mi)
- Reigate (4.8 mi)
- East Grinstead (7.5 mi)
- Caterham (8.2 mi)
- Banstead (10.4 mi)