Wales · 3 towns
Automatic rising bollard installation in Conwy
Automatic bollards for sites across Conwy: surveyed, quoted in writing and installed by our crews.
Computer-generated imageAutomatic bollards in Conwy
We supply and install automatic bollards across Conwy, with local pages for 3 towns below. Hydraulic and electro-mechanical rising bollards installed with controls, safety loops, signals and power, for managed vehicle access.
Highway authorities for local roads in Conwy: Conwy County Borough Council.
Choose your town in Conwy
Guide prices in Conwy
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,895–£7,795 + VAT | Electro-mechanical or entry hydraulic, controls, loops and photocell |
| Upgraded | £6,395–£11,295 + VAT | Heavy-duty hydraulic, traffic light, signs and LED head |
| Premium | £9,895–£14,595 + VAT | High-cycle or crash-rated automatic bollard |
Per bollard, installed with controls, loops and commissioning; -3% for Wales. Guide only — the fixed price follows a survey.
Local authorities across Conwy
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Colwyn Bay | Conwy County Borough Council | Conwy County Borough Council |
| Llandudno | Conwy County Borough Council | Conwy County Borough Council |
| Abergele | Conwy County Borough Council | Conwy County Borough Council |
Rules for automatic bollards in Wales
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Rising bollards should fail safe, never rise beneath a vehicle, carry clear signs and give the emergency services an override.
Details and sources: bollard rules in Wales.
How installation works
Survey and risk assessment
A free site survey covers traffic patterns, who uses the entrance, power, drainage routes and buried services. We draft the safety arrangement from that, and you receive a fixed written quote.
Excavate and set cassettes
Each cassette pit is excavated to the manufacturer's depth, with the base prepared to drain. Cassettes are set to finished road level and fall, then concreted in.
Ducts, drainage and loops
Ducts are laid between the bollards, the controller cabinet and access devices, with draw pits where runs change direction. The drain is connected and the safety and exit loops are cut into the surface and sealed.
Commission and test
Rise and fall times, loop detection, photocells, lights and the manual release are tested with vehicles present. Safety settings are recorded against the risk assessment.
Automatic bollards in Conwy: FAQs
Do you cover all of Conwy for automatic bollards?
Yes — including Colwyn Bay, Llandudno and Abergele. Enter your postcode in the price calculator to confirm.
How much do automatic bollards cost in Conwy?
In Conwy, typically £2,895–£14,595 per bollard, installed with controls, loops and commissioning, plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Conwy?
For local roads, Conwy County Borough Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.
What happens in a power cut?
That depends on how the system is configured. Traffic bollards are often set to lower or can be lowered with a manual release, so vehicles are not trapped. Security bollards may be set to stay raised, with a procedure for staff to follow.
How will emergency vehicles get through?
Usually by an agreed method such as a fire service key switch, a code, a remote handset held by the site or a free-exit arrangement. It should be agreed with the emergency services before the bollards go live.