Bollard Installers

Scotland · 1 towns

Automatic rising bollard installation in Dundee City

Automatic bollards for sites across Dundee City: surveyed, quoted in writing and installed by our crews.

Stainless steel automatic rising bollard in a controlled access lane, with induction loop slots cut in the tarmac and a red and green signal on a postComputer-generated image

Automatic bollards in Dundee City

Hydraulic and electro-mechanical rising bollards installed with controls, safety loops, signals and power, for managed vehicle access. We cover Dundee City — Dundee.

Highway and roads authorities for local roads in Dundee City: Dundee City Council.

Choose your town in Dundee City

Guide prices in Dundee City

SpecificationGuide priceIncludes
Standard£2,995–£8,045 + VATElectro-mechanical or entry hydraulic, controls, loops and photocell
Upgraded£6,595–£11,595 + VATHeavy-duty hydraulic, traffic light, signs and LED head
Premium£10,195–£14,995 + VATHigh-cycle or crash-rated automatic bollard

Per bollard, installed with controls, loops and commissioning; no regional adjustment. Guide only — the fixed price follows a survey.

Who looks after the roads in Dundee City

TownHighway / roads authorityPlanning authority
DundeeDundee City CouncilDundee City Council

Rules for automatic bollards in Scotland

Works in a public road or footway need the roads authority's written consent under the Roads (Scotland) Act 1984. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Rising bollards should fail safe, never rise beneath a vehicle, carry clear signs and give the emergency services an override.

Details and sources: bollard rules in Scotland.

How installation works

Ducts, drainage and loops

Ducts are laid between the bollards, the controller cabinet and access devices, with draw pits where runs change direction. The drain is connected and the safety and exit loops are cut into the surface and sealed.

Power and controls

A qualified electrician installs the supply and isolation, and the controller, traffic lights, photocells and access devices are mounted and wired.

Commission and test

Rise and fall times, loop detection, photocells, lights and the manual release are tested with vehicles present. Safety settings are recorded against the risk assessment.

Train and hand over

Site staff are shown how to lower the bollard in an emergency and how to recognise faults. You receive keys, the commissioning record and the manufacturer's manuals.

Automatic bollards in Dundee City: FAQs

Do you cover all of Dundee City for automatic bollards?

Yes — including Dundee. Enter your postcode in the price calculator to confirm.

How much do automatic bollards cost in Dundee City?

In Dundee City, typically £2,995–£14,995 per bollard, installed with controls, loops and commissioning, plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.

Who do I ask about bollards on public land in Dundee City?

The council is the roads authority for local roads (Dundee City Council); Transport Scotland covers trunk roads. Works in a public road need the roads authority's written consent.

Should I choose hydraulic or electro-mechanical bollards?

Choose by how often the bollard will move and how you want it maintained. Hydraulic units suit busy entrances and heavier rated posts but need fluid and seal checks. Electro-mechanical units avoid fluid and are often simpler to look after at moderate traffic levels.

Can rising bollards be installed on a public road?

Only with the roads authority's approval, and they will set requirements for signs, signals and operation. On private land the decision is yours, but the same safety principles apply.

Other services in Dundee City

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote