Scotland · 1 towns
Automatic rising bollard installation in Glasgow City
Automatic bollards for sites across Glasgow City: surveyed, quoted in writing and installed by our crews.
Computer-generated imageAutomatic bollards in Glasgow City
Across Glasgow City, typical sites for automatic bollards include pedestrianised streets, city-centre plazas and office forecourts. Hydraulic and electro-mechanical rising bollards installed with controls, safety loops, signals and power, for managed vehicle access.
Highway and roads authorities for local roads in Glasgow City: Glasgow City Council.
Choose your town in Glasgow City
Guide prices in Glasgow City
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,995–£8,045 + VAT | Electro-mechanical or entry hydraulic, controls, loops and photocell |
| Upgraded | £6,595–£11,595 + VAT | Heavy-duty hydraulic, traffic light, signs and LED head |
| Premium | £10,195–£14,995 + VAT | High-cycle or crash-rated automatic bollard |
Per bollard, installed with controls, loops and commissioning; no regional adjustment. Guide only — the fixed price follows a survey.
Who looks after the roads in Glasgow City
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Glasgow | Glasgow City Council | Glasgow City Council |
Rules for automatic bollards in Scotland
Works in a public road or footway need the roads authority's written consent under the Roads (Scotland) Act 1984. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Rising bollards should fail safe, never rise beneath a vehicle, carry clear signs and give the emergency services an override.
Details and sources: bollard rules in Scotland.
How installation works
Survey and risk assessment
A free site survey covers traffic patterns, who uses the entrance, power, drainage routes and buried services. We draft the safety arrangement from that, and you receive a fixed written quote.
Excavate and set cassettes
Each cassette pit is excavated to the manufacturer's depth, with the base prepared to drain. Cassettes are set to finished road level and fall, then concreted in.
Ducts, drainage and loops
Ducts are laid between the bollards, the controller cabinet and access devices, with draw pits where runs change direction. The drain is connected and the safety and exit loops are cut into the surface and sealed.
Commission and test
Rise and fall times, loop detection, photocells, lights and the manual release are tested with vehicles present. Safety settings are recorded against the risk assessment.
Automatic bollards in Glasgow City: FAQs
Do you cover all of Glasgow City for automatic bollards?
Yes — including Glasgow. Enter your postcode in the price calculator to confirm.
How much do automatic bollards cost in Glasgow City?
In Glasgow City, typically £2,995–£14,995 per bollard, installed with controls, loops and commissioning, plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Glasgow City?
The council is the roads authority for local roads (Glasgow City Council); Transport Scotland covers trunk roads. Works in a public road need the roads authority's written consent.
Should I choose hydraulic or electro-mechanical bollards?
Choose by how often the bollard will move and how you want it maintained. Hydraulic units suit busy entrances and heavier rated posts but need fluid and seal checks. Electro-mechanical units avoid fluid and are often simpler to look after at moderate traffic levels.
Why do automatic bollards need drainage?
The bollard sits in a pit that collects rain and silt. Without a drain, water corrodes the mechanism, short-circuits electrics and can freeze the post in place. A drain connection is part of every automatic installation we carry out.