Gloucestershire · England
Automatic rising bollard installation in Kingswood
Local installation of automatic bollards in Kingswood — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAutomatic bollards in Kingswood
Automatic bollards are available unrated for traffic control or crash-tested for security entrances. In Kingswood, that tends to mean sites such as town-centre squares, small industrial units and filling-station forecourts.
Coverage in Kingswood takes in the BS15 and BS30 postcode districts and nearby places like Two Mile Hill, Warmley, Oldland and Bitton. Nearby, we also work in Mangotsfield (2.4 miles), Bristol (3.8 miles), Yate (7.2 miles) and Bath (8.3 miles), measured as the crow flies. It sits roughly 4 miles from Bristol as the crow flies.
Key facts for this area
- Area
- Gloucestershire, England
- Highway authority
- South Gloucestershire Council (local roads)
- Planning authority
- South Gloucestershire Council
- Postcodes
- BS15 and BS30
- Guide price
- Typically £2,995–£14,995 per bollard + VAT
- Survey
- Free, with a fixed written quote
- Nearby
- Mangotsfield (2.4 mi), Bristol (3.8 mi), Yate (7.2 mi), Bath (8.3 mi)
What Kingswood sites use automatic bollards for
Around Kingswood, automatic bollards usually solve one of these:
- Entrances where a gate would block pedestrian desire lines
- Secure loading yards where rated automatic posts are specified
- Business parks and campus roads with controlled vehicle access
Guide prices for Kingswood
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,995–£8,045 + VAT | Electro-mechanical or entry hydraulic, controls, loops and photocell |
| Upgraded | £6,595–£11,595 + VAT | Heavy-duty hydraulic, traffic light, signs and LED head |
| Premium | £10,195–£14,995 + VAT | High-cycle or crash-rated automatic bollard |
Per bollard, installed with controls, loops and commissioning; no regional adjustment. Guide only — the fixed price follows a survey.
Consents, ground and services in Kingswood
The highway authority for local roads in Kingswood is South Gloucestershire Council; motorways and trunk roads sit with National Highways. Automatic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (South Gloucestershire Council) first — we flag this at survey.
Automatic bollards need a deep pit for the cassette and a reliable way for water to leave it. Reinstatement around each cassette is made flush so vehicles pass smoothly over the lowered head.
- For rated units, keep the test certificate and confirm the foundation matches the tested design.
- On public highway, rising bollards normally need highway authority approval, with signs and signals to their requirements.
From survey to handover
Power and controls
A qualified electrician installs the supply and isolation, and the controller, traffic lights, photocells and access devices are mounted and wired.
Commission and test
Rise and fall times, loop detection, photocells, lights and the manual release are tested with vehicles present. Safety settings are recorded against the risk assessment.
Train and hand over
Site staff are shown how to lower the bollard in an emergency and how to recognise faults. You receive keys, the commissioning record and the manufacturer's manuals.
Options to consider
| Option | Detail |
|---|---|
| Fail-safe behaviour | Configured to lower or stay raised on power loss, with a manual release, depending on whether access or security takes priority. |
| Heights and diameters | Raised heights are commonly around 500–800 mm for traffic control and taller for security models, with diameters varying by drive and rating. |
| Electro-mechanical drive | Motor and gearbox inside the bollard with no hydraulic fluid. Often simpler to service, with duty cycles that suit moderate traffic. |
Pricing automatic bollards in Kingswood
Two Kingswood jobs with the same number of posts can price quite differently. The usual reasons:
- Hydraulic or electro-mechanical drive and the duty cycle needed
- Access control devices, traffic lights and signage
- Traffic management during installation on live roads
Looking after them
Frequency depends on how often the bollard cycles; a busy entrance needs more visits than a rarely used one. Between visits, site staff should keep the head clear of grit and leaves, report slow or noisy movement early and never override safety devices to keep an entrance open.
We can also service, repair or replace existing posts anywhere in Kingswood.
Automatic bollards in Kingswood: FAQs
Can you install automatic bollards anywhere in Kingswood?
We cover all of Kingswood (BS15 and BS30) and the rest of Gloucestershire. We also work in Mangotsfield, Bristol and Yate.
Do I need consent for automatic bollards on a public footway in Kingswood?
The highway authority for local roads in Kingswood is South Gloucestershire Council; motorways and trunk roads sit with National Highways. Automatic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do automatic bollards cost in Kingswood?
In Kingswood, typically £2,995–£14,995 per bollard, installed with controls, loops and commissioning, plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
What stops a rising bollard hitting a car?
A safety loop in the road detects a vehicle above or close to the bollard and blocks the rise, backed up by photocells. Traffic lights and head lights tell drivers when to stop. The settings are tested on site with vehicles before handover.
What happens in a power cut?
That depends on how the system is configured. Traffic bollards are often set to lower or can be lowered with a manual release, so vehicles are not trapped. Security bollards may be set to stay raised, with a procedure for staff to follow.
Automatic bollards near Kingswood
- Mangotsfield (2.4 mi)
- Bristol (3.8 mi)
- Yate (7.2 mi)
- Bath (8.3 mi)
- Nailsea (10.9 mi)
- Portishead (11.4 mi)