Gloucestershire · England
Pedestrian protection bollards in Kingswood
Pedestrian protection bollards for sites across Kingswood and the rest of Gloucestershire, from the first measurement to the last relaid paving block.
Computer-generated imageKingswood pedestrian protection bollards
We supply and fit pedestrian protection bollards throughout Kingswood, typically for sites such as schools, local parades and high street shopfronts. Products range from unrated steel posts to bollards tested against low-speed impacts under PAS 170-1.
We work across BS15 and BS30 — Kingswood itself and places including Two Mile Hill, Warmley, Oldland and Bitton. Jobs in Kingswood can be combined with work in Mangotsfield (2.4 miles), Bristol (3.8 miles), Yate (7.2 miles) and Bath (8.3 miles) (straight-line distances). Bristol is around 4 miles away.
Kingswood at a glance
- Area
- Gloucestershire, England
- Highway authority
- South Gloucestershire Council (local roads)
- Planning authority
- South Gloucestershire Council
- Postcodes
- BS15 and BS30
- Guide price
- Typically £245–£1,195 per bollard + VAT; minimum job £595
- Survey
- Free, with a fixed written quote
- Nearby
- Mangotsfield (2.4 mi), Bristol (3.8 mi), Yate (7.2 mi), Bath (8.3 mi)
Pedestrian protection bollards in Kingswood: common uses
Common uses in a place like Kingswood:
- Walkways through supermarket and retail park car parks
- EV charging points and trolley shelters
- School and hospital drop-off zones
Pedestrian protection bollard prices in Kingswood
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £245–£645 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £535–£925 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £815–£1,195 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Permissions and groundwork in Kingswood
In Kingswood, work on adopted pavements and verges needs consent from South Gloucestershire Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
If your site in Kingswood is listed or inside a conservation area, check with the local planning authority (South Gloucestershire Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Car park edges and walkways tend to be built quickly over shallow hardcore, and their kerb lines often carry lighting cables, drainage channels and ducts for EV chargers or signs. Where bollards protect a shopfront, the building's own foundations and any canopy columns may sit close to the line, which limits how deep and wide each base can go.
- If a tested product has been requested, confirm PAS 170-1 or another stated standard and install to the tested foundation.
- Keep clear gaps of typically at least 1,000–1,200 mm and keep main walkways wide enough, referring to Inclusive Mobility guidance.
How the job runs
Excavate and set
Each position is cut, dug and checked for services, and the posts are set plumb in concrete to a consistent height.
Reinstate
Paving, tarmac or concrete is made good flush around each post, with tactile paving reinstated where it was disturbed.
Agree a plan for live trading
Work is phased so entrances and walkways stay open, with each section fenced while it is dug and set. Busy sites often prefer early starts or quieter weekdays.
Choosing the right spec
| Option | Detail |
|---|---|
| Visibility bands | Reflective and contrasting bands help drivers and partially sighted pedestrians see posts. |
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts, for sites where proven performance has been asked for. |
| Wheel stops and kerbs | Used with bollards to stop cars before they reach the posts, reducing daily knocks. |
Pricing pedestrian protection bollards in Kingswood
When we price pedestrian protection bollards in Kingswood, these make the biggest difference:
- Unrated steel or PAS 170-1 tested products
- Finishes such as stainless or decorative posts
- Number of posts and length of line
After installation
Damaged posts near entrances should be dealt with quickly, as a bent post with a torn edge is a hazard in its own right. If one post keeps being hit, look at the bay layout or add a wheel stop rather than replacing the same post repeatedly.
If posts in Kingswood are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about pedestrian protection bollards in Kingswood
Do you install pedestrian protection bollards in Kingswood?
We cover all of Kingswood (BS15 and BS30) and the rest of Gloucestershire. We also work in Mangotsfield, Bristol and Yate.
Do I need consent for pedestrian protection bollards on a public footway in Kingswood?
South Gloucestershire Council is the highway authority covering Kingswood's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for pedestrian protection bollards in Kingswood?
In Kingswood, typically £245–£1,195 per bollard, supplied and installed, plus VAT, with a minimum job of £595 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Our outdoor seating faces the car park: what should we do?
Put a line of posts between the seating and the nearest parking or driving lane, with gaps narrow enough to stop a car. Positions should allow for cars that overshoot a bay. It is worth recording the decision in your risk assessment.
Do pedestrian protection bollards need to be crash-rated?
Not usually. They deal with low-speed driver errors, so firmly founded steel posts often suffice. Where an owner, insurer or designer wants proven performance, PAS 170-1 tested products are the usual choice.
Pedestrian protection in nearby towns
- Mangotsfield (2.4 mi)
- Bristol (3.8 mi)
- Yate (7.2 mi)
- Bath (8.3 mi)
- Nailsea (10.9 mi)
- Portishead (11.4 mi)