Gloucestershire · England
Flexible bollard installation in Kingswood
Flexible bollards for sites across Kingswood and the rest of Gloucestershire, from the first measurement to the last relaid paving block.
Computer-generated imageFlexible bollards in Kingswood
From small industrial units, community buildings and local parades, Kingswood has plenty of places where flexible bollards earn their keep. Polyurethane and spring-based bollards that bend when hit and return upright, for car parks, depots and lane separation.
Coverage in Kingswood takes in the BS15 and BS30 postcode districts and nearby places like Two Mile Hill, Warmley, Oldland and Bitton. Nearby, we also work in Mangotsfield (2.4 miles), Bristol (3.8 miles), Yate (7.2 miles) and Bath (8.3 miles), measured as the crow flies. Bristol is around 4 miles away.
Kingswood at a glance
- Area
- Gloucestershire, England
- Highway authority
- South Gloucestershire Council (local roads)
- Planning authority
- South Gloucestershire Council
- Postcodes
- BS15 and BS30
- Guide price
- Typically £195–£595 per bollard + VAT; minimum job £445
- Survey
- Free, with a fixed written quote
- Nearby
- Mangotsfield (2.4 mi), Bristol (3.8 mi), Yate (7.2 mi), Bath (8.3 mi)
Where flexible bollards go in around Kingswood
Typical reasons Kingswood sites choose flexible bollards:
- Lane separation at car park entrances and exits
- Temporary or trial layouts before permanent kerbs
- Depot and yard routes where vehicles knock posts daily
Kingswood: typical flexible bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £195–£365 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £315–£485 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £435–£595 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; no regional adjustment. Guide only — the fixed price follows a survey.
Before we dig in Kingswood
The highway authority for local roads in Kingswood is South Gloucestershire Council; motorways and trunk roads sit with National Highways. Flexible bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (South Gloucestershire Council) first — we flag this at survey.
Multi-storey and rooftop decks are a special case: slabs may be post-tensioned or carry waterproofing and heating, so drilling depth and positions are agreed with the building owner and scanned first. Flexible bollards put repeated load on their fixings, because every knock rocks the base.
- Check drilling into car park decks or podium slabs with the building owner before fixing.
- Keep pedestrian gaps and routes clear, referring to Inclusive Mobility guidance where people walk through the line.
Installation, step by step
Survey traffic movements
The free site survey looks at vehicle sizes, turning paths and where drivers currently clip posts or kerbs. You receive a fixed written quote with post type and fixing.
Fix the bases
Holes are drilled and cleaned, resin anchors or bolts are set and the bases fixed and torqued once cured. Socket bases are set flush in concrete.
Hand over spares and records
Post and base details are recorded so replacements match, and spare posts can be left on site for busy locations. Staff are shown how a post is swapped on its base.
Options to consider
| Option | Detail |
|---|---|
| Colours and reflective sleeves | Yellow, black, red, white or orange, with reflective sleeves for visibility in low light. |
| Sprung-base bollards | A rigid post on a heavy spring or elastomer base that tilts and returns. Looks like a conventional bollard. |
| Bolt-down or socket bases | Bolt-down for existing slabs; socket bases allow posts to be replaced without new fixings. |
What moves the price in Kingswood
Our South West guide prices are a starting point; the survey in Kingswood firms them up. What tends to move them:
- Deck scanning and restrictions on drilling
- Bolt-down or socket base
- Number of posts and length of line
After installation
Clean reflective sleeves so they stay visible, and replace them when they fade or peel. Posts exposed to strong sunlight slowly lose flexibility and colour, and eventually crack; replacing the post on its existing base is usually quick.
We can also service, repair or replace existing posts anywhere in Kingswood.
Questions about flexible bollards in Kingswood
Can you install flexible bollards anywhere in Kingswood?
We cover all of Kingswood (BS15 and BS30) and the rest of Gloucestershire. We also work in Mangotsfield, Bristol and Yate.
Who gives permission for bollards on the pavement in Kingswood?
South Gloucestershire Council is the highway authority covering Kingswood's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for flexible bollards in Kingswood?
In Kingswood, typically £195–£595 per bollard, supplied and fixed, plus VAT, with a minimum job of £445 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Can flexible bollards go in a multi-storey car park?
Yes, often with low-profile bases. The deck has to be checked first, as some slabs contain tendons or waterproofing that must not be drilled. The building owner usually needs to agree the fixing method.
How many times can a flexible bollard be hit?
Many times in normal use, as long as the impacts are the low-speed bumps it is designed for. A heavy vehicle running right over it, or a high-speed strike, can tear it. Manufacturers give guidance for their products.
Flexible bollards near Kingswood
- Mangotsfield (2.4 mi)
- Bristol (3.8 mi)
- Yate (7.2 mi)
- Bath (8.3 mi)
- Nailsea (10.9 mi)
- Portishead (11.4 mi)