Gloucestershire · England
Ram-raid protection bollards in Kingswood
Local installation of ram-raid bollards in Kingswood — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageRam-raid bollards in Kingswood
Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in. In Kingswood, that tends to mean sites such as schools, town-centre squares and small industrial units.
We work across BS15 and BS30 — Kingswood itself and places including Two Mile Hill, Warmley, Oldland and Bitton. Nearby, we also work in Mangotsfield (2.4 miles), Bristol (3.8 miles), Yate (7.2 miles) and Bath (8.3 miles), measured as the crow flies. It sits roughly 4 miles from Bristol as the crow flies.
Key facts for this area
- Area
- Gloucestershire, England
- Highway authority
- South Gloucestershire Council (local roads)
- Planning authority
- South Gloucestershire Council
- Postcodes
- BS15 and BS30
- Guide price
- Typically £395–£1,495 per bollard + VAT; minimum job £945
- Survey
- Free, with a fixed written quote
- Nearby
- Mangotsfield (2.4 mi), Bristol (3.8 mi), Yate (7.2 mi), Bath (8.3 mi)
Ram-raid bollards in Kingswood: common uses
Common uses in a place like Kingswood:
- Convenience stores and off-licences with glazed frontages
- Premises that have already been targeted once
- Filling station kiosks and forecourt shops
Guide prices for Kingswood
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £395–£855 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £725–£1,195 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,495 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Before we dig in Kingswood
South Gloucestershire Council is the highway authority covering Kingswood's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (South Gloucestershire Council) first — we flag this at survey.
We hand-dig near known services, adjust positions if a vault or duct is found, and reinstate the surface to match, whether that is slabs, block paving, asphalt or a sealed forecourt finish. Deep foundations need care near the building's own footings and basement walls.
- Ask your landlord, and check any lease restrictions on alterations to the frontage.
- If an insurer has asked for protection, confirm what standard or product they expect before ordering.
How the job runs
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Arrange consents
If the posts will stand on public highway, the highway authority's agreement is needed before work starts. Landlord consent is usually needed for leased units.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Choosing the right spec
| Option | Detail |
|---|---|
| Stainless or decorative covers | Covers over steel cores for shopping streets and branded frontages where plain steel would look out of place. |
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested. |
What affects the quote
When we price ram-raid bollards in Kingswood, these make the biggest difference:
- Reinstatement of forecourt or natural stone surfaces
- Out-of-hours working to avoid closing the shop
- Number of posts across the frontage or ATM
After installation
If you have been raided despite having bollards, look again at the positions and gaps, because offenders tend to aim at any weak point. Check them after any knock, because a post that has been hit may have cracked its foundation even if it still looks straight.
If posts in Kingswood are later hit or damaged, we can repair or replace them — see bollard repairs.
Ram-raid bollards in Kingswood: FAQs
Do you install ram-raid bollards in Kingswood?
We cover all of Kingswood (BS15 and BS30) and the rest of Gloucestershire. We also work in Mangotsfield, Bristol and Yate.
Who gives permission for bollards on the pavement in Kingswood?
In Kingswood, work on adopted pavements and verges needs consent from South Gloucestershire Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do ram-raid bollards cost in Kingswood?
In Kingswood, typically £395–£1,495 per bollard, supplied and installed, plus VAT, with a minimum job of £945 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Can we still take deliveries through the front?
Yes, if one or more positions are removable. Staff unlock and lift out the post for deliveries, then refit it. The socket is designed to sit flush when the post is out.
Can bollards go on the pavement outside my shop?
Only if you own the ground or have the highway authority's agreement. Many shop frontages include a strip of private forecourt, which is simpler. We check ownership as part of the survey.
Ram-raid bollards in nearby towns
- Mangotsfield (2.4 mi)
- Bristol (3.8 mi)
- Yate (7.2 mi)
- Bath (8.3 mi)
- Nailsea (10.9 mi)
- Portishead (11.4 mi)