Somerset · England
Ram-raid protection bollards in Portishead
Ram-raid bollards for sites across Portishead and the rest of Somerset, from the first measurement to the last relaid paving block.
Computer-generated imagePortishead ram-raid bollards
Bollards fitted in front of shopfronts, ATMs, jewellers and convenience stores to stop vehicles being used to break in. In Portishead, that tends to mean sites such as schools, high street shopfronts and town-centre squares.
Coverage in Portishead takes in the BS20 postcode district and nearby places like Pill, Easton-in-Gordano, Portbury and Weston in Gordano. Jobs in Portishead can be combined with work in Nailsea (3.5 miles), Clevedon (4.7 miles), Bristol (7.7 miles) and Kingswood (11.4 miles) (straight-line distances). Portishead is about 8 miles from Bristol.
Key facts for this area
- Area
- Somerset, England
- Highway authority
- North Somerset Council (local roads)
- Planning authority
- North Somerset Council
- Postcodes
- BS20
- Guide price
- Typically £395–£1,495 per bollard + VAT; minimum job £945
- Survey
- Free, with a fixed written quote
Ram-raid bollard prices in Portishead
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £395–£855 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £725–£1,195 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £1,045–£1,495 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Typical ram-raid bollards jobs in Portishead
Common uses in a place like Portishead:
- Jewellers, pawnbrokers and phone shops holding high-value stock
- Filling station kiosks and forecourt shops
- Convenience stores and off-licences with glazed frontages
Consents, ground and services in Portishead
North Somerset Council is the highway authority covering Portishead's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
If your site in Portishead is listed or inside a conservation area, check with the local planning authority (North Somerset Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Deep foundations need care near the building's own footings and basement walls. Shop forecourts may be thin concrete over old fill, and filling station forecourts carry fuel lines, tank vents and interceptors that must be located precisely before anything is dug.
- If an insurer has asked for protection, confirm what standard or product they expect before ordering.
- Leave clear gaps for wheelchairs and buggies, typically at least 1,000 mm, and keep the footway width usable, referring to Inclusive Mobility guidance.
How the job runs
Agree the post type and positions
We agree unrated or tested posts with you, your landlord and any insurer or security adviser involved. A fixed written quote sets out the positions, foundations and reinstatement.
Excavate and set the posts
Each position is hand-dug near services and taken to depth, then the post is set plumb in a reinforced concrete base. Work is planned around trading hours where possible.
Reinstate the pavement
Paving, tarmac or forecourt concrete is made good flush with the base of each post, leaving no trip edges.
Specification choices
| Option | Detail |
|---|---|
| Concrete-filled steel posts | Thick-walled steel tube root-fixed in a deep reinforced base. The usual unrated choice for shopfronts and ATMs. |
| PAS 170-1 tested bollards | Tested against low-speed vehicle impacts and suited to ram-raid risks where a tested product is requested. |
| Reflective and contrasting bands | Bands near the top help pedestrians, including partially sighted people, see the posts on a busy pavement. |
What affects the quote
When we price ram-raid bollards in Portishead, these make the biggest difference:
- Reinstatement of forecourt or natural stone surfaces
- Foundation depth and what is found under the pavement
- Removable positions and their locks
After installation
Check them after any knock, because a post that has been hit may have cracked its foundation even if it still looks straight. If you have been raided despite having bollards, look again at the positions and gaps, because offenders tend to aim at any weak point.
We can also service, repair or replace existing posts anywhere in Portishead.
Ram-raid bollards in Portishead: FAQs
Can you install ram-raid bollards anywhere in Portishead?
We cover all of Portishead (BS20) and the rest of Somerset. We also work in Nailsea, Clevedon and Bristol.
Do I need consent for ram-raid bollards on a public footway in Portishead?
In Portishead, work on adopted pavements and verges needs consent from North Somerset Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do ram-raid bollards cost in Portishead?
In Portishead, typically £395–£1,495 per bollard, supplied and installed, plus VAT, with a minimum job of £945 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Can bollards go on the pavement outside my shop?
Only if you own the ground or have the highway authority's agreement. Many shop frontages include a strip of private forecourt, which is simpler. We check ownership as part of the survey.
Can we still take deliveries through the front?
Yes, if one or more positions are removable. Staff unlock and lift out the post for deliveries, then refit it. The socket is designed to sit flush when the post is out.
Ram-raid bollards in nearby towns
- Nailsea (3.5 mi)
- Clevedon (4.7 mi)
- Bristol (7.7 mi)
- Kingswood (11.4 mi)
- Mangotsfield (11.4 mi)
- Weston-super-Mare (13 mi)