Gloucestershire · England
Removable bollard installation in Kingswood
Local installation of removable bollards in Kingswood — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout removable bollards in Kingswood
Removable bollards suit plenty of Kingswood sites, community buildings, local parades and schools among them. Lift-out bollards in lockable ground sockets for driveways, delivery routes, access roads and emergency access points.
We cover Kingswood's BS15 and BS30 postcode districts, including places such as Two Mile Hill, Warmley, Oldland and Bitton. Jobs in Kingswood can be combined with work in Mangotsfield (2.4 miles), Bristol (3.8 miles), Yate (7.2 miles) and Bath (8.3 miles) (straight-line distances). Kingswood is about 4 miles from Bristol.
Local details
- Area
- Gloucestershire, England
- Highway authority
- South Gloucestershire Council (local roads)
- Planning authority
- South Gloucestershire Council
- Postcodes
- BS15 and BS30
- Guide price
- Typically £245–£845 per bollard + VAT (£285–£995 inc VAT for homes); minimum job £595
- Survey
- Free, with a fixed written quote
- Nearby
- Mangotsfield (2.4 mi), Bristol (3.8 mi), Yate (7.2 mi), Bath (8.3 mi)
Removable bollards in Kingswood: common uses
Typical reasons Kingswood sites choose removable bollards:
- Temporary event closures and market streets
- Maintenance tracks through parks and open spaces
- Gaps in a fixed bollard line that must open occasionally
Guide prices for Kingswood
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £245–£495 + VAT · £285–£585 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £425–£675 + VAT · £505–£805 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £605–£845 + VAT · £725–£995 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with ground socket, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Before we dig in Kingswood
In Kingswood, work on adopted pavements and verges needs consent from South Gloucestershire Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
If your site in Kingswood is listed or inside a conservation area, check with the local planning authority (South Gloucestershire Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
The critical details are level and drainage. On thin tarmac drives, the surround is sized so the socket does not loosen over time.
- Check whether the location is public highway; a highway authority agreement is usually needed there.
- Fit reflective or contrasting bands near the top so posts are visible when in place.
What happens on site
Agree who will lift the post
At the free site survey we talk through who will remove the post, how often and where it will be stored. That decides material, diameter and lock, and goes into a fixed written quote.
Cut and excavate
A small square of surface is cut out and excavated to socket depth, with a bed of free-draining stone at the bottom so water can leave the socket.
Reinstate around the socket
Block paving, tarmac or flags are cut tight to the collar and made good. On resin or bound surfaces, the edge is sealed neatly.
Finishes and options
| Option | Detail |
|---|---|
| Locking type | Triangular or square key, padlock, or integral keyed cylinder. Keyed-alike locks let one key open every post on a site. |
| Heads and handles | Dome, flat or ball heads, with lifting handles or eyes so posts can be pulled out without strain. |
| Diameter and height | Commonly 76–140 mm diameter and around 900–1,000 mm high, chosen to suit visibility and handling. |
What moves the price in Kingswood
Two Kingswood jobs with the same number of posts can price quite differently. The usual reasons:
- Number of posts and sockets
- Drainage at the socket base
- Surface type and reinstatement
Looking after them
Check the lid springs and hinges. Lubricate locks a few times a year with a graphite or lock-specific spray, lift the posts out periodically even if they are not needed, and clear the socket of debris.
We can also service, repair or replace existing posts anywhere in Kingswood.
Questions about removable bollards in Kingswood
Which parts of Kingswood do you cover for removable bollards?
We cover all of Kingswood (BS15 and BS30) and the rest of Gloucestershire. We also work in Mangotsfield, Bristol and Yate.
Who gives permission for bollards on the pavement in Kingswood?
In Kingswood, work on adopted pavements and verges needs consent from South Gloucestershire Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do removable bollards cost in Kingswood?
In Kingswood, typically £245–£845 per bollard with ground socket, supplied and installed, plus VAT (£285–£995 including VAT for homeowners), with a minimum job of £595 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Where do we keep the post when it is removed?
Somewhere it cannot become a trip hazard or be taken. A wall-mounted storage bracket or a locked store nearby works well. Leaving posts lying on the ground is how they get damaged or lost.
Will a removable bollard freeze in place?
It can if water sits in the socket and freezes around the post. Good drainage at the socket base is the main defence. A little lubricant on the post and lifting it out occasionally in winter also helps.
Removable bollards in nearby towns
- Mangotsfield (2.4 mi)
- Bristol (3.8 mi)
- Yate (7.2 mi)
- Bath (8.3 mi)
- Nailsea (10.9 mi)
- Portishead (11.4 mi)