Somerset · England
Removable bollard installation in Portishead
Planning removable bollards in Portishead? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout removable bollards in Portishead
Whether it's filling-station forecourts, schools and community car parks, removable bollards in Portishead are planned around who needs to get through and who doesn't. Removable bollards are used where vehicles need occasional rather than daily access.
Coverage in Portishead takes in the BS20 postcode district and nearby places like Pill, Easton-in-Gordano, Portbury and Weston in Gordano. Nearby, we also work in Nailsea (3.5 miles), Clevedon (4.7 miles), Bristol (7.7 miles) and Kingswood (11.4 miles), measured as the crow flies. Portishead is about 8 miles from Bristol.
Portishead at a glance
- Area
- Somerset, England
- Highway authority
- North Somerset Council (local roads)
- Planning authority
- North Somerset Council
- Postcodes
- BS20
- Guide price
- Typically £245–£845 per bollard + VAT (£285–£995 inc VAT for homes); minimum job £595
- Survey
- Free, with a fixed written quote
Portishead: typical removable bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £245–£495 + VAT · £285–£585 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £425–£675 + VAT · £505–£805 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £605–£845 + VAT · £725–£995 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with ground socket, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Typical removable bollards jobs in Portishead
Typical reasons Portishead sites choose removable bollards:
- Delivery bays in pedestrian areas and shop frontages
- Gaps in a fixed bollard line that must open occasionally
- Temporary event closures and market streets
Before we dig in Portishead
The highway authority for local roads in Portishead is North Somerset Council; motorways and trunk roads sit with National Highways. Removable bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (North Somerset Council) first — we flag this at survey.
The critical details are level and drainage. The base sits on free-draining stone or connects to a drainage route, so rainwater does not stand in the socket and freeze around the post in winter.
- Check whether the location is public highway; a highway authority agreement is usually needed there.
- On emergency access routes, agree with the fire service how they will remove the posts, such as standard keys or bolt croppers on padlocks.
Installation, step by step
Agree who will lift the post
At the free site survey we talk through who will remove the post, how often and where it will be stored. That decides material, diameter and lock, and goes into a fixed written quote.
Cut and excavate
A small square of surface is cut out and excavated to socket depth, with a bed of free-draining stone at the bottom so water can leave the socket.
Fit posts and hand over keys
Posts are fitted and locked, and the lift-out and refit routine is checked on site. Keys and any storage brackets are handed over.
Specification choices
| Option | Detail |
|---|---|
| Locking type | Triangular or square key, padlock, or integral keyed cylinder. Keyed-alike locks let one key open every post on a site. |
| Diameter and height | Commonly 76–140 mm diameter and around 900–1,000 mm high, chosen to suit visibility and handling. |
| Steel, stainless or aluminium posts | Galvanised and powder-coated steel for robustness, stainless for appearance, aluminium where lightness matters for frequent lifting. |
What moves the price in Portishead
Our South West guide prices are a starting point; the survey in Portishead firms them up. What tends to move them:
- Rated removable posts where security is required
- Lock type and whether locks are keyed alike
- Surface type and reinstatement
Looking after them
Removable bollards fail in predictable ways: seized locks, sockets full of grit and lids that no longer close. Keep spare keys somewhere sensible, because lost keys are a common reason for a post being cut out.
For damaged or loose posts in Portishead, repairs and replacements are priced in writing first.
Questions about removable bollards in Portishead
Can you install removable bollards anywhere in Portishead?
We cover all of Portishead (BS20) and the rest of Somerset. We also work in Nailsea, Clevedon and Bristol.
Who gives permission for bollards on the pavement in Portishead?
In Portishead, work on adopted pavements and verges needs consent from North Somerset Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do removable bollards cost in Portishead?
In Portishead, typically £245–£845 per bollard with ground socket, supplied and installed, plus VAT (£285–£995 including VAT for homeowners), with a minimum job of £595 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Will a removable bollard freeze in place?
It can if water sits in the socket and freezes around the post. Good drainage at the socket base is the main defence. A little lubricant on the post and lifting it out occasionally in winter also helps.
What happens to the hole when the bollard is out?
A lid on the socket closes over it so the surface is flush. Spring-closing lids shut automatically when the post is lifted. That stops trips and keeps debris out.
Removable bollards in nearby towns
- Nailsea (3.5 mi)
- Clevedon (4.7 mi)
- Bristol (7.7 mi)
- Kingswood (11.4 mi)
- Mangotsfield (11.4 mi)
- Weston-super-Mare (13 mi)