Gloucestershire · England
Steel security bollard installation in Kingswood
Steel security bollards supplied and fitted in Kingswood, Gloucestershire: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout steel security bollards in Kingswood
In the town of Kingswood, steel security bollards tend to go in at filling-station forecourts, community car parks and town-centre squares. Unrated steel bollards have not been crash-tested, so they deter vehicles and stop low-speed knocks and casual misuse rather than a determined attack.
We cover Kingswood's BS15 and BS30 postcode districts, including places such as Two Mile Hill, Warmley, Oldland and Bitton. Nearby, we also work in Mangotsfield (2.4 miles), Bristol (3.8 miles), Yate (7.2 miles) and Bath (8.3 miles), measured as the crow flies. Bristol is around 4 miles away.
Kingswood at a glance
- Area
- Gloucestershire, England
- Highway authority
- South Gloucestershire Council (local roads)
- Planning authority
- South Gloucestershire Council
- Postcodes
- BS15 and BS30
- Guide price
- Typically £195–£895 per bollard + VAT (£225–£1,045 inc VAT for homes); minimum job £595
- Survey
- Free, with a fixed written quote
- Nearby
- Mangotsfield (2.4 mi), Bristol (3.8 mi), Yate (7.2 mi), Bath (8.3 mi)
What Kingswood sites use steel security bollards for
Common uses in a place like Kingswood:
- Protecting meter boxes, gas kiosks, pillars and corners
- Car park perimeters, end-of-bay protection and walkway edges
- Forecourts and building entrances needing a visible boundary
What steel security bollards cost in Kingswood
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £195–£485 + VAT · £225–£575 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £405–£695 + VAT · £485–£825 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £615–£895 + VAT · £735–£1,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
What we check first in Kingswood
South Gloucestershire Council is the highway authority covering Kingswood's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Many private-land installations in Kingswood need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at South Gloucestershire Council before posts go in.
Verges are often softer than they look, and the edges of car parks may be thin tarmac over hardcore, so the foundation is sized to the ground found. Root-fixed posts need firm ground and enough depth to carry the post's root plus a concrete surround.
- Keep clear gaps of typically at least 1,000–1,200 mm where pedestrians, wheelchair users or buggies pass between posts.
- Fit contrasting or reflective bands near the top so posts are visible, as Inclusive Mobility guidance recommends.
How the job runs
Survey and set out
A free site survey confirms positions, surfaces, buried services and whether root-fixing or base plates suit the ground. You receive a fixed written quote listing post size, finish and fixing.
Set the posts
Posts are set plumb and to a consistent height along the line, and concreted in. Base-plated posts are drilled, anchored with resin and torqued once cured.
Reinstate and finish
The surface around each post is made good to match, and reflective bands are fitted. Damaged galvanising from handling is touched up.
Specification choices
| Option | Detail |
|---|---|
| Caps and heads | Dome, flat, chamfered or ball tops, with welded caps to keep water out of hollow posts. |
| Visibility bands | Reflective or contrasting bands near the top for drivers at night and for partially sighted pedestrians. |
| Concrete infill | Adds mass and stiffness and makes the post harder to cut or dent. Usually specified for security and impact positions. |
Pricing steel security bollards in Kingswood
Two Kingswood jobs with the same number of posts can price quite differently. The usual reasons:
- Root-fixed or base-plated installation
- Number of posts and length of the line
- Surface reinstatement such as block paving or tarmac
After installation
Reflective bands fade and peel and are easy to renew. A post that leans after a knock usually means the foundation has moved or cracked; it should be re-bedded or replaced rather than left as a trip or snag hazard.
For damaged or loose posts in Kingswood, repairs and replacements are priced in writing first.
Common questions
Can you install steel security bollards anywhere in Kingswood?
We cover all of Kingswood (BS15 and BS30) and the rest of Gloucestershire. We also work in Mangotsfield, Bristol and Yate.
Do I need consent for steel security bollards on a public footway in Kingswood?
In Kingswood, work on adopted pavements and verges needs consent from South Gloucestershire Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do steel security bollards cost in Kingswood?
In Kingswood, typically £195–£895 per bollard, supplied and installed, plus VAT (£225–£1,045 including VAT for homeowners), with a minimum job of £595 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Why fill a steel bollard with concrete?
Concrete infill adds weight and stiffness, so the post dents less and is harder to cut. It also stops water collecting inside a hollow tube. It is usual for security and impact positions.
What diameter of steel bollard do I need?
Match it to the job. Around 114 mm suits car park walkways and verges; 168 or 219 mm with a heavier wall suits service yards and corners that lorries pass. The survey looks at what is likely to hit the posts.
Steel security bollards in nearby towns
- Mangotsfield (2.4 mi)
- Bristol (3.8 mi)
- Yate (7.2 mi)
- Bath (8.3 mi)
- Nailsea (10.9 mi)
- Portishead (11.4 mi)