Gloucestershire · England
Steel security bollard installation in Mangotsfield
Steel security bollards for sites across Mangotsfield and the rest of Gloucestershire, from the first measurement to the last relaid paving block.
Computer-generated imageAbout steel security bollards in Mangotsfield
Steel security bollards suit plenty of Mangotsfield sites, high street shopfronts, schools and community car parks among them. Concrete-filled steel bollards, root-fixed or base-plated, for car parks, forecourts, boundaries and nuisance vehicle control.
We work across BS16, BS36, BS34 and BS32 — Mangotsfield itself and places including Frenchay, Stoke Gifford, Pucklechurch and Frampton Cotterell. Nearby, we also work in Kingswood (2.4 miles), Bristol (4.6 miles), Yate (5.2 miles) and Bath (9.9 miles), measured as the crow flies. Mangotsfield is about 5 miles from Bristol.
Local details
- Area
- Gloucestershire, England
- Highway authority
- South Gloucestershire Council (local roads)
- Planning authority
- South Gloucestershire Council
- Postcodes
- BS16, BS36, BS34 and BS32
- Guide price
- Typically £195–£895 per bollard + VAT (£225–£1,045 inc VAT for homes); minimum job £595
- Survey
- Free, with a fixed written quote
Guide prices for Mangotsfield
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £195–£485 + VAT · £225–£575 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £405–£695 + VAT · £485–£825 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £615–£895 + VAT · £735–£1,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Typical steel security bollards jobs in Mangotsfield
Typical reasons Mangotsfield sites choose steel security bollards:
- Forecourts and building entrances needing a visible boundary
- Social housing estates with nuisance parking
- Car park perimeters, end-of-bay protection and walkway edges
Before we dig in Mangotsfield
The highway authority for local roads in Mangotsfield is South Gloucestershire Council; motorways and trunk roads sit with National Highways. Steel security bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (South Gloucestershire Council) first — we flag this at survey.
Base plates must sit on a slab thick and sound enough to hold resin anchors; cracked or thin concrete will let the anchors pull out on the first knock. Verges are often softer than they look, and the edges of car parks may be thin tarmac over hardcore, so the foundation is sized to the ground found.
- Keep clear gaps of typically at least 1,000–1,200 mm where pedestrians, wheelchair users or buggies pass between posts.
- Check whether the land is public highway or adopted verge before installing; the highway authority's agreement is usually needed.
How the job runs
Survey and set out
A free site survey confirms positions, surfaces, buried services and whether root-fixing or base plates suit the ground. You receive a fixed written quote listing post size, finish and fixing.
Fill and cap
Where specified, posts are filled with concrete and capped so water cannot collect inside the tube.
Reinstate and finish
The surface around each post is made good to match, and reflective bands are fitted. Damaged galvanising from handling is touched up.
Finishes and options
| Option | Detail |
|---|---|
| Root-fixed | Cast into a concrete foundation, typically with several hundred millimetres of post below ground. The usual choice where digging is possible. |
| Visibility bands | Reflective or contrasting bands near the top for drivers at night and for partially sighted pedestrians. |
| Tube size and wall thickness | Common diameters include 76, 114, 140, 168 and 219 mm, with heavier walls for service yards and vehicle routes. |
What affects the quote
When we price steel security bollards in Mangotsfield, these make the biggest difference:
- Tube diameter, wall thickness and concrete infill
- Surface reinstatement such as block paving or tarmac
- Finish: galvanised only or powder-coated
After installation
Powder coat chipped by vehicles should be touched up before the galvanising underneath starts to weather. Reflective bands fade and peel and are easy to renew.
We can also service, repair or replace existing posts anywhere in Mangotsfield.
Common questions
Which parts of Mangotsfield do you cover for steel security bollards?
We cover all of Mangotsfield (BS16, BS36, BS34 and BS32) and the rest of Gloucestershire. We also work in Kingswood, Bristol and Yate.
Who gives permission for bollards on the pavement in Mangotsfield?
The highway authority for local roads in Mangotsfield is South Gloucestershire Council; motorways and trunk roads sit with National Highways. Steel security bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for steel security bollards in Mangotsfield?
In Mangotsfield, typically £195–£895 per bollard, supplied and installed, plus VAT (£225–£1,045 including VAT for homeowners), with a minimum job of £595 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Will galvanised posts rust?
Hot-dip galvanising protects steel for a long time in normal outdoor conditions. Powder coat over the galvanising adds colour and extra protection. Touch up chips promptly in coastal or heavily salted locations.
What diameter of steel bollard do I need?
Match it to the job. Around 114 mm suits car park walkways and verges; 168 or 219 mm with a heavier wall suits service yards and corners that lorries pass. The survey looks at what is likely to hit the posts.