Somerset · England
Steel security bollard installation in Bath
Local installation of steel security bollards in Bath — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageBath steel security bollards
Across Bath, typical sites for steel security bollards include leisure centres, college campuses and town-centre streets. Unrated steel bollards have not been crash-tested, so they deter vehicles and stop low-speed knocks and casual misuse rather than a determined attack.
Coverage in Bath takes in the BA1 and BA2 postcode districts and nearby places like Upper Swainswick, Kelston, Tadwick and Langridge. Nearby, we also work in Trowbridge (7.7 miles), Kingswood (8.3 miles), Mangotsfield (9.9 miles) and Frome (10.3 miles), measured as the crow flies. Bristol is around 12 miles away.
Key facts for this area
- Area
- Somerset, England
- Highway authority
- Bath and North East Somerset Council (local roads)
- Planning authority
- Bath and North East Somerset Council
- Postcodes
- BA1 and BA2
- Guide price
- Typically £195–£895 per bollard + VAT (£225–£1,045 inc VAT for homes); minimum job £595
- Survey
- Free, with a fixed written quote
- Nearby
- Trowbridge (7.7 mi), Kingswood (8.3 mi), Mangotsfield (9.9 mi), Frome (10.3 mi)
Steel security bollard prices in Bath
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £195–£485 + VAT · £225–£575 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £405–£695 + VAT · £485–£825 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £615–£895 + VAT · £735–£1,045 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
What Bath sites use steel security bollards for
Around Bath, steel security bollards usually solve one of these:
- Grass verges and landscaped areas that vans keep driving over
- Lines between pedestrian routes and service yards
- Car park perimeters, end-of-bay protection and walkway edges
Consents, ground and services in Bath
In Bath, work on adopted pavements and verges needs consent from Bath and North East Somerset Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
If your site in Bath is listed or inside a conservation area, check with the local planning authority (Bath and North East Somerset Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Verges are often softer than they look, and the edges of car parks may be thin tarmac over hardcore, so the foundation is sized to the ground found. Base plates must sit on a slab thick and sound enough to hold resin anchors; cracked or thin concrete will let the anchors pull out on the first knock.
- Do not describe unrated posts as anti-ram or HVM protection in risk assessments or to insurers.
- Keep clear gaps of typically at least 1,000–1,200 mm where pedestrians, wheelchair users or buggies pass between posts.
What happens on site
Break out and excavate
For root-fixed posts, the surface is cut neatly and each hole is dug to depth, by hand near known services. For base plates, the slab is checked for thickness and soundness.
Set the posts
Posts are set plumb and to a consistent height along the line, and concreted in. Base-plated posts are drilled, anchored with resin and torqued once cured.
Fill and cap
Where specified, posts are filled with concrete and capped so water cannot collect inside the tube.
Options to consider
| Option | Detail |
|---|---|
| Base-plated | Bolted to a sound concrete slab with resin anchors. Quick to fit and easy to remove later, suited to light-duty and indoor use. |
| Caps and heads | Dome, flat, chamfered or ball tops, with welded caps to keep water out of hollow posts. |
| Tube size and wall thickness | Common diameters include 76, 114, 140, 168 and 219 mm, with heavier walls for service yards and vehicle routes. |
What moves the price in Bath
When we price steel security bollards in Bath, these make the biggest difference:
- Ground conditions and buried services
- Root-fixed or base-plated installation
- Number of posts and length of the line
After installation
Powder coat chipped by vehicles should be touched up before the galvanising underneath starts to weather. Reflective bands fade and peel and are easy to renew.
We can also service, repair or replace existing posts anywhere in Bath.
Steel security bollards in Bath: FAQs
Which parts of Bath do you cover for steel security bollards?
We cover all of Bath (BA1 and BA2) and the rest of Somerset. We also work in Trowbridge, Kingswood and Mangotsfield.
Who gives permission for bollards on the pavement in Bath?
In Bath, work on adopted pavements and verges needs consent from Bath and North East Somerset Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do steel security bollards cost in Bath?
In Bath, typically £195–£895 per bollard, supplied and installed, plus VAT (£225–£1,045 including VAT for homeowners), with a minimum job of £595 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
What diameter of steel bollard do I need?
Match it to the job. Around 114 mm suits car park walkways and verges; 168 or 219 mm with a heavier wall suits service yards and corners that lorries pass. The survey looks at what is likely to hit the posts.
Can new posts match our existing ones?
Usually, if we can measure the existing diameter, height, cap and colour. Galvanised steel in standard sizes is easy to match; older or unusual sections may need a close equivalent.
Steel security bollards near Bath
- Trowbridge (7.7 mi)
- Kingswood (8.3 mi)
- Mangotsfield (9.9 mi)
- Frome (10.3 mi)
- Bristol (11.5 mi)
- Yate (11.7 mi)