Wales · 2 towns
Automatic rising bollard installation in Gwynedd
Automatic bollards for sites across Gwynedd: surveyed, quoted in writing and installed by our crews.
Computer-generated imageAutomatic bollards in Gwynedd
We supply and install automatic bollards across Gwynedd, with local pages for 2 towns below. Hydraulic and electro-mechanical rising bollards installed with controls, safety loops, signals and power, for managed vehicle access.
Highway authorities for local roads in Gwynedd: Gwynedd Council.
Choose your town in Gwynedd
Guide prices in Gwynedd
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,895–£7,795 + VAT | Electro-mechanical or entry hydraulic, controls, loops and photocell |
| Upgraded | £6,395–£11,295 + VAT | Heavy-duty hydraulic, traffic light, signs and LED head |
| Premium | £9,895–£14,595 + VAT | High-cycle or crash-rated automatic bollard |
Per bollard, installed with controls, loops and commissioning; -3% for Wales. Guide only — the fixed price follows a survey.
Who looks after the roads in Gwynedd
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Bangor, Gwynedd | Gwynedd Council | Gwynedd Council |
| Caernarfon | Gwynedd Council | Gwynedd Council |
Rules for automatic bollards in Wales
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Rising bollards should fail safe, never rise beneath a vehicle, carry clear signs and give the emergency services an override.
Details and sources: bollard rules in Wales.
How installation works
Excavate and set cassettes
Each cassette pit is excavated to the manufacturer's depth, with the base prepared to drain. Cassettes are set to finished road level and fall, then concreted in.
Power and controls
A qualified electrician installs the supply and isolation, and the controller, traffic lights, photocells and access devices are mounted and wired.
Commission and test
Rise and fall times, loop detection, photocells, lights and the manual release are tested with vehicles present. Safety settings are recorded against the risk assessment.
Train and hand over
Site staff are shown how to lower the bollard in an emergency and how to recognise faults. You receive keys, the commissioning record and the manufacturer's manuals.
Automatic bollards in Gwynedd: FAQs
Do you cover all of Gwynedd for automatic bollards?
Yes — including Bangor, Gwynedd and Caernarfon. Enter your postcode in the price calculator to confirm.
How much do automatic bollards cost in Gwynedd?
In Gwynedd, typically £2,895–£14,595 per bollard, installed with controls, loops and commissioning, plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Gwynedd?
For local roads, Gwynedd Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.
What stops a rising bollard hitting a car?
A safety loop in the road detects a vehicle above or close to the bollard and blocks the rise, backed up by photocells. Traffic lights and head lights tell drivers when to stop. The settings are tested on site with vehicles before handover.
How will emergency vehicles get through?
Usually by an agreed method such as a fire service key switch, a code, a remote handset held by the site or a free-exit arrangement. It should be agreed with the emergency services before the bollards go live.