Hampshire · England
Automatic rising bollard installation in Fleet
Automatic bollards supplied and fitted in Fleet, Hampshire: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout automatic bollards in Fleet
We supply and fit automatic bollards throughout Fleet, typically for sites such as town-centre squares, community car parks and high street shopfronts. Automatic bollards are available unrated for traffic control or crash-tested for security entrances.
We work across GU51, GU52, RG27 and RG29 — Fleet itself and places including Elvetham Heath, Crookham Village, Hartley Wintney and Phoenix Green. Nearby, we also work in Farnborough (3.4 miles), Aldershot (3.9 miles), Yateley (4.1 miles) and Sandhurst (4.8 miles), measured as the crow flies. It sits roughly 13 miles from Reading as the crow flies.
Local details
- Area
- Hampshire, England
- Highway authority
- Hampshire County Council (local roads)
- Planning authority
- the council for Hart
- Postcodes
- GU51, GU52, RG27 and RG29
- Guide price
- Typically £3,195–£15,895 per bollard + VAT
- Survey
- Free, with a fixed written quote
- Nearby
- Farnborough (3.4 mi), Aldershot (3.9 mi), Yateley (4.1 mi), Sandhurst (4.8 mi)
Fleet: typical automatic bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £3,195–£8,495 + VAT | Electro-mechanical or entry hydraulic, controls, loops and photocell |
| Upgraded | £6,995–£12,295 + VAT | Heavy-duty hydraulic, traffic light, signs and LED head |
| Premium | £10,795–£15,895 + VAT | High-cycle or crash-rated automatic bollard |
Per bollard, installed with controls, loops and commissioning; +6% for South East. Guide only — the fixed price follows a survey.
Where automatic bollards go in around Fleet
Common uses in a place like Fleet:
- Emergency access routes that must open on demand
- Entrances where a gate would block pedestrian desire lines
- Private estates and gated developments without a full gate
Permissions and groundwork in Fleet
Hampshire County Council is the highway authority covering Fleet's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Hart) first — we flag this at survey.
Automatic bollards need a deep pit for the cassette and a reliable way for water to leave it. Loops are cut into a sound surface: badly cracked tarmac or block paving may need resurfacing first, because loops in broken surfaces fail early.
- Prepare a written risk assessment covering pedestrians, cyclists, following vehicles and children, and choose safety devices to match.
- Agree emergency access with the fire and ambulance services, including how they will lower the bollards.
Installation, step by step
Excavate and set cassettes
Each cassette pit is excavated to the manufacturer's depth, with the base prepared to drain. Cassettes are set to finished road level and fall, then concreted in.
Power and controls
A qualified electrician installs the supply and isolation, and the controller, traffic lights, photocells and access devices are mounted and wired.
Commission and test
Rise and fall times, loop detection, photocells, lights and the manual release are tested with vehicles present. Safety settings are recorded against the risk assessment.
Specification choices
| Option | Detail |
|---|---|
| Hydraulic drive | Integral or remote power pack. Suits high-frequency entrances and heavier rated units, with periodic checks on fluid, seals and hoses. |
| Unrated or crash-rated | Unrated units control traffic; rated units are tested to IWA 14-1, ISO 22343-1 or PAS 68 for security entrances, with deeper, heavier foundations. |
| Heights and diameters | Raised heights are commonly around 500–800 mm for traffic control and taller for security models, with diameters varying by drive and rating. |
What moves the price in Fleet
When we price automatic bollards in Fleet, these make the biggest difference:
- Surface condition for loops and the extent of reinstatement
- Number of bollards and lanes controlled
- Traffic management during installation on live roads
Looking after them
Automatic bollards need planned servicing, not just repair when they fail. Between visits, site staff should keep the head clear of grit and leaves, report slow or noisy movement early and never override safety devices to keep an entrance open.
For damaged or loose posts in Fleet, repairs and replacements are priced in writing first.
Automatic bollards in Fleet: FAQs
Do you install automatic bollards in Fleet?
We cover all of Fleet (GU51, GU52, RG27 and RG29) and the rest of Hampshire. We also work in Farnborough, Aldershot and Yateley.
Do I need consent for automatic bollards on a public footway in Fleet?
Hampshire County Council is the highway authority covering Fleet's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for automatic bollards in Fleet?
In Fleet, typically £3,195–£15,895 per bollard, installed with controls, loops and commissioning, plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
What happens in a power cut?
That depends on how the system is configured. Traffic bollards are often set to lower or can be lowered with a manual release, so vehicles are not trapped. Security bollards may be set to stay raised, with a procedure for staff to follow.
What stops a rising bollard hitting a car?
A safety loop in the road detects a vehicle above or close to the bollard and blocks the rise, backed up by photocells. Traffic lights and head lights tell drivers when to stop. The settings are tested on site with vehicles before handover.
Automatic bollards in nearby towns
- Farnborough (3.4 mi)
- Aldershot (3.9 mi)
- Yateley (4.1 mi)
- Sandhurst (4.8 mi)
- Farnham (5 mi)
- Camberley (5.4 mi)