Hampshire · England
Automatic rising bollard installation in Aldershot
Automatic bollards supplied and fitted in Aldershot, Hampshire: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAldershot automatic bollards
Automatic bollards are available unrated for traffic control or crash-tested for security entrances. In Aldershot, that tends to mean sites such as high street shopfronts, filling-station forecourts and town-centre squares.
We cover every part of Aldershot in the GU11 postcode district. We also cover neighbouring Farnham (2.8 miles), Farnborough (3.2 miles), Fleet (3.9 miles) and Camberley (6.2 miles) — distances are straight-line. Aldershot is about 17 miles from Reading.
Local details
- Area
- Hampshire, England
- Highway authority
- Hampshire County Council (local roads)
- Planning authority
- the council for Rushmoor
- Postcodes
- GU11
- Guide price
- Typically £3,195–£15,895 per bollard + VAT
- Survey
- Free, with a fixed written quote
- Nearby
- Farnham (2.8 mi), Farnborough (3.2 mi), Fleet (3.9 mi), Camberley (6.2 mi)
What Aldershot sites use automatic bollards for
Around Aldershot, automatic bollards usually solve one of these:
- Secure loading yards where rated automatic posts are specified
- Emergency access routes that must open on demand
- Business parks and campus roads with controlled vehicle access
What automatic bollards cost in Aldershot
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £3,195–£8,495 + VAT | Electro-mechanical or entry hydraulic, controls, loops and photocell |
| Upgraded | £6,995–£12,295 + VAT | Heavy-duty hydraulic, traffic light, signs and LED head |
| Premium | £10,795–£15,895 + VAT | High-cycle or crash-rated automatic bollard |
Per bollard, installed with controls, loops and commissioning; +6% for South East. Guide only — the fixed price follows a survey.
Consents, ground and services in Aldershot
In Aldershot, work on adopted pavements and verges needs consent from Hampshire County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
Many private-land installations in Aldershot need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Rushmoor before posts go in.
The pit base is usually connected to a surface water drain or a soakaway, and on clay or high water table sites that connection needs particular attention. Reinstatement around each cassette is made flush so vehicles pass smoothly over the lowered head.
- For rated units, keep the test certificate and confirm the foundation matches the tested design.
- Agree emergency access with the fire and ambulance services, including how they will lower the bollards.
Installation, step by step
Survey and risk assessment
A free site survey covers traffic patterns, who uses the entrance, power, drainage routes and buried services. We draft the safety arrangement from that, and you receive a fixed written quote.
Ducts, drainage and loops
Ducts are laid between the bollards, the controller cabinet and access devices, with draw pits where runs change direction. The drain is connected and the safety and exit loops are cut into the surface and sealed.
Power and controls
A qualified electrician installs the supply and isolation, and the controller, traffic lights, photocells and access devices are mounted and wired.
Specification choices
| Option | Detail |
|---|---|
| Heights and diameters | Raised heights are commonly around 500–800 mm for traffic control and taller for security models, with diameters varying by drive and rating. |
| Hydraulic drive | Integral or remote power pack. Suits high-frequency entrances and heavier rated units, with periodic checks on fluid, seals and hoses. |
| Paired or multi-bollard lanes | Several bollards can run from one controller to close a wider entrance, with lane-by-lane control where needed. |
What affects the quote
Two Aldershot jobs with the same number of posts can price quite differently. The usual reasons:
- Access control devices, traffic lights and signage
- Surface condition for loops and the extent of reinstatement
- Unrated or crash-rated model and its foundation size
Looking after them
Typical visits clean and inspect the cassette and drain, check hydraulic fluid or gearbox condition, test loops, photocells, lights and the manual release, and read the controller's fault log. Between visits, site staff should keep the head clear of grit and leaves, report slow or noisy movement early and never override safety devices to keep an entrance open.
For damaged or loose posts in Aldershot, repairs and replacements are priced in writing first.
Common questions
Which parts of Aldershot do you cover for automatic bollards?
We cover all of Aldershot (GU11) and the rest of Hampshire. We also work in Farnham, Farnborough and Fleet.
Do I need consent for automatic bollards on a public footway in Aldershot?
The highway authority for local roads in Aldershot is Hampshire County Council; motorways and trunk roads sit with National Highways. Automatic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for automatic bollards in Aldershot?
In Aldershot, typically £3,195–£15,895 per bollard, installed with controls, loops and commissioning, plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Should I choose hydraulic or electro-mechanical bollards?
Choose by how often the bollard will move and how you want it maintained. Hydraulic units suit busy entrances and heavier rated posts but need fluid and seal checks. Electro-mechanical units avoid fluid and are often simpler to look after at moderate traffic levels.
What happens in a power cut?
That depends on how the system is configured. Traffic bollards are often set to lower or can be lowered with a manual release, so vehicles are not trapped. Security bollards may be set to stay raised, with a procedure for staff to follow.
Automatic bollards near Aldershot
- Farnham (2.8 mi)
- Farnborough (3.2 mi)
- Fleet (3.9 mi)
- Camberley (6.2 mi)
- Sandhurst (6.9 mi)
- Yateley (7.1 mi)