Wales · 2 towns
Automatic rising bollard installation in Powys
Automatic bollards for sites across Powys: surveyed, quoted in writing and installed by our crews.
Computer-generated imageAutomatic bollards in Powys
We supply and install automatic bollards across Powys, with local pages for 2 towns below. Hydraulic and electro-mechanical rising bollards installed with controls, safety loops, signals and power, for managed vehicle access.
Highway authorities for local roads in Powys: Powys County Council.
Choose your town in Powys
Guide prices in Powys
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,895–£7,795 + VAT | Electro-mechanical or entry hydraulic, controls, loops and photocell |
| Upgraded | £6,395–£11,295 + VAT | Heavy-duty hydraulic, traffic light, signs and LED head |
| Premium | £9,895–£14,595 + VAT | High-cycle or crash-rated automatic bollard |
Per bollard, installed with controls, loops and commissioning; -3% for Wales. Guide only — the fixed price follows a survey.
Highway and planning authorities in Powys
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Newtown | Powys County Council | Powys County Council |
| Brecon | Powys County Council | Powys County Council |
Rules for automatic bollards in Wales
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Rising bollards should fail safe, never rise beneath a vehicle, carry clear signs and give the emergency services an override.
Details and sources: bollard rules in Wales.
How installation works
Survey and risk assessment
A free site survey covers traffic patterns, who uses the entrance, power, drainage routes and buried services. We draft the safety arrangement from that, and you receive a fixed written quote.
Power and controls
A qualified electrician installs the supply and isolation, and the controller, traffic lights, photocells and access devices are mounted and wired.
Commission and test
Rise and fall times, loop detection, photocells, lights and the manual release are tested with vehicles present. Safety settings are recorded against the risk assessment.
Train and hand over
Site staff are shown how to lower the bollard in an emergency and how to recognise faults. You receive keys, the commissioning record and the manufacturer's manuals.
Automatic bollards in Powys: FAQs
Do you cover all of Powys for automatic bollards?
Yes — including Newtown and Brecon. Enter your postcode in the price calculator to confirm.
How much do automatic bollards cost in Powys?
In Powys, typically £2,895–£14,595 per bollard, installed with controls, loops and commissioning, plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Powys?
For local roads, Powys County Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.
Why do automatic bollards need drainage?
The bollard sits in a pit that collects rain and silt. Without a drain, water corrodes the mechanism, short-circuits electrics and can freeze the post in place. A drain connection is part of every automatic installation we carry out.
Can rising bollards be installed on a public road?
Only with the highway authority's approval, and they will set requirements for signs, signals and operation. On private land the decision is yours, but the same safety principles apply.