Staffordshire · England
Automatic rising bollard installation in Lichfield
Automatic bollards for sites across Lichfield and the rest of Staffordshire, from the first measurement to the last relaid paving block.
Computer-generated imageAutomatic bollards in Lichfield
Across Lichfield, typical sites for automatic bollards include town-centre squares, filling-station forecourts and schools. Automatic bollards are available unrated for traffic control or crash-tested for security entrances.
We work across WS13 and WS14 — Lichfield itself and places including Fradley South, Streethay, Fradley and Pipehill. Jobs in Lichfield can be combined with work in Burntwood (4.3 miles), Tamworth (6.3 miles), Aldridge (6.5 miles) and Rugeley (7.1 miles) (straight-line distances). It sits roughly 14 miles from Wolverhampton as the crow flies.
Local details
- Area
- Staffordshire, England
- Highway authority
- Staffordshire County Council (local roads)
- Planning authority
- the council for Lichfield
- Postcodes
- WS13 and WS14
- Guide price
- Typically £2,995–£14,995 per bollard + VAT
- Survey
- Free, with a fixed written quote
What automatic bollards cost in Lichfield
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,995–£8,045 + VAT | Electro-mechanical or entry hydraulic, controls, loops and photocell |
| Upgraded | £6,595–£11,595 + VAT | Heavy-duty hydraulic, traffic light, signs and LED head |
| Premium | £10,195–£14,995 + VAT | High-cycle or crash-rated automatic bollard |
Per bollard, installed with controls, loops and commissioning; no regional adjustment. Guide only — the fixed price follows a survey.
What Lichfield sites use automatic bollards for
Common uses in a place like Lichfield:
- Secure loading yards where rated automatic posts are specified
- Entrances where a gate would block pedestrian desire lines
- Bus gates and access-only routes where the highway authority agrees
What we check first in Lichfield
The highway authority for local roads in Lichfield is Staffordshire County Council; motorways and trunk roads sit with National Highways. Automatic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Lichfield is listed or inside a conservation area, check with the local planning authority (the council for Lichfield) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Duct routes cross the carriageway and often the footway, so buried services along those routes must be traced first. The pit base is usually connected to a surface water drain or a soakaway, and on clay or high water table sites that connection needs particular attention.
- Prepare a written risk assessment covering pedestrians, cyclists, following vehicles and children, and choose safety devices to match.
- For rated units, keep the test certificate and confirm the foundation matches the tested design.
Installation, step by step
Excavate and set cassettes
Each cassette pit is excavated to the manufacturer's depth, with the base prepared to drain. Cassettes are set to finished road level and fall, then concreted in.
Ducts, drainage and loops
Ducts are laid between the bollards, the controller cabinet and access devices, with draw pits where runs change direction. The drain is connected and the safety and exit loops are cut into the surface and sealed.
Power and controls
A qualified electrician installs the supply and isolation, and the controller, traffic lights, photocells and access devices are mounted and wired.
Specification choices
| Option | Detail |
|---|---|
| Fail-safe behaviour | Configured to lower or stay raised on power loss, with a manual release, depending on whether access or security takes priority. |
| Unrated or crash-rated | Unrated units control traffic; rated units are tested to IWA 14-1, ISO 22343-1 or PAS 68 for security entrances, with deeper, heavier foundations. |
| Head lighting and finishes | LED rings or lights in the head, reflective bands, and powder-coated or stainless finishes. Lit heads help drivers see the post when it is raised. |
What moves the price in Lichfield
Two Lichfield jobs with the same number of posts can price quite differently. The usual reasons:
- Length of duct runs, drainage connections and power supply distance
- Unrated or crash-rated model and its foundation size
- Number of bollards and lanes controlled
Keeping them working
Typical visits clean and inspect the cassette and drain, check hydraulic fluid or gearbox condition, test loops, photocells, lights and the manual release, and read the controller's fault log. Frequency depends on how often the bollard cycles; a busy entrance needs more visits than a rarely used one.
For damaged or loose posts in Lichfield, repairs and replacements are priced in writing first.
Questions about automatic bollards in Lichfield
Which parts of Lichfield do you cover for automatic bollards?
We cover all of Lichfield (WS13 and WS14) and the rest of Staffordshire. We also work in Burntwood, Tamworth and Aldridge.
Who gives permission for bollards on the pavement in Lichfield?
In Lichfield, work on adopted pavements and verges needs consent from Staffordshire County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do automatic bollards cost in Lichfield?
In Lichfield, typically £2,995–£14,995 per bollard, installed with controls, loops and commissioning, plus VAT, using our West Midlands guide prices. The fixed figure comes in writing after we've seen the site.
How will emergency vehicles get through?
Usually by an agreed method such as a fire service key switch, a code, a remote handset held by the site or a free-exit arrangement. It should be agreed with the emergency services before the bollards go live.
Why do automatic bollards need drainage?
The bollard sits in a pit that collects rain and silt. Without a drain, water corrodes the mechanism, short-circuits electrics and can freeze the post in place. A drain connection is part of every automatic installation we carry out.
Automatic bollards near Lichfield
- Burntwood (4.3 mi)
- Tamworth (6.3 mi)
- Aldridge (6.5 mi)
- Rugeley (7.1 mi)
- Sutton Coldfield (7.9 mi)
- Cannock (8.6 mi)