Staffordshire · England
Warehouse and loading-bay bollards in Lichfield
Warehouse impact bollards supplied and fitted in Lichfield, Staffordshire: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageLichfield warehouse impact bollards
In the city of Lichfield, warehouse impact bollards tend to go in at high street shopfronts, filling-station forecourts and small industrial units. Yellow steel and polymer impact bollards for forklift zones, loading bays, doors, columns and racking inside warehouses.
We work across WS13 and WS14 — Lichfield itself and places including Fradley South, Streethay, Fradley and Pipehill. We also cover neighbouring Burntwood (4.3 miles), Tamworth (6.3 miles), Aldridge (6.5 miles) and Rugeley (7.1 miles) — distances are straight-line. It sits roughly 14 miles from Wolverhampton as the crow flies.
Lichfield at a glance
- Area
- Staffordshire, England
- Highway authority
- Staffordshire County Council (local roads)
- Planning authority
- the council for Lichfield
- Postcodes
- WS13 and WS14
- Guide price
- Typically £175–£1,195 per bollard + VAT; minimum job £445
- Survey
- Free, with a fixed written quote
What warehouse impact bollards cost in Lichfield
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £175–£605 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £485–£905 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £785–£1,195 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; no regional adjustment. Guide only — the fixed price follows a survey.
What Lichfield sites use warehouse impact bollards for
Around Lichfield, warehouse impact bollards usually solve one of these:
- Loading dock doors, shutter guides and dock levellers
- Charging stations for forklifts and pallet trucks
- Racking ends and corners in busy aisles
Permissions and groundwork in Lichfield
The highway authority for local roads in Lichfield is Staffordshire County Council; motorways and trunk roads sit with National Highways. Warehouse impact bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Bollards on private land often don't need planning permission, but it depends on the council's view, the height and the location; in a conservation area, next to a listed building or under an Article 4 direction, ask the local planning authority (the council for Lichfield) first — we flag this at survey.
Anchors need enough edge distance from slab joints and cracks or they will split the concrete on first impact. Where a slab is too thin or poor, the options include through-bolting, a larger base plate to spread load, a polymer bollard that reduces anchor forces, or breaking out and casting a new local foundation.
- Keep fire exits, escape routes and fire equipment accessible; bollards must not narrow escape routes below their required width.
- Check with the building owner before drilling into slabs with underfloor heating, guidance wires or post-tensioned reinforcement.
Installation, step by step
Check the slab
Slab thickness, joints, cracks and any underfloor services or heating are checked, and anchors are chosen for the floor rather than taken from a standard list.
Plan around operations
Work is phased by aisle or zone, or done out of hours, with each area barriered off while drilling. Dust is controlled with extraction where products are stored nearby.
Drill and anchor
Holes are drilled, cleaned and anchors installed to the maker's instructions. Chemical anchors are left to cure before the bollard is loaded.
Options to consider
| Option | Detail |
|---|---|
| Column and rack end guards | Wrap-around or corner protectors for columns and racking uprights where a single post will not fit. |
| Diameters and heights | Commonly 114–273 mm diameter and around 600–1,200 mm high, chosen for vehicle type and mast or fork height. |
| Polymer impact bollards | Flex and recover on impact, reducing damage to anchors, floor and vehicle. Need clearance to deflect. |
What moves the price in Lichfield
Our West Midlands guide prices are a starting point; the survey in Lichfield firms them up. What tends to move them:
- Floor marking and associated signage
- Slab condition and the anchors or foundations it needs
- Out-of-hours or phased working around operations
After installation
Repaint or recoat steel posts when the yellow is worn, because faded protection is easier to miss. On steel bollards look for bending, cracked welds, loose or sheared anchors and cracked concrete around the base plate.
We can also service, repair or replace existing posts anywhere in Lichfield.
Common questions
Which parts of Lichfield do you cover for warehouse impact bollards?
We cover all of Lichfield (WS13 and WS14) and the rest of Staffordshire. We also work in Burntwood, Tamworth and Aldridge.
Who gives permission for bollards on the pavement in Lichfield?
The highway authority for local roads in Lichfield is Staffordshire County Council; motorways and trunk roads sit with National Highways. Warehouse impact bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for warehouse impact bollards in Lichfield?
In Lichfield, typically £175–£1,195 per bollard, supplied and fixed, plus VAT, with a minimum job of £445 plus VAT, using our West Midlands guide prices. The fixed figure comes in writing after we've seen the site.
How close to a column should a bollard sit?
Close enough that a vehicle cannot reach the column around it, but with enough gap that the bollard does not hit the column when struck. Polymer bollards need more clearance than steel because they deflect. The gap is set from the product data.
Should we choose steel or polymer warehouse bollards?
Steel suits lighter traffic and sound, thick slabs where cost matters most. Polymer suits busy forklift areas where repeated impacts would destroy anchors and floors. Polymer often costs more to buy but less to keep in service.
Warehouse bollards in nearby towns
- Burntwood (4.3 mi)
- Tamworth (6.3 mi)
- Aldridge (6.5 mi)
- Rugeley (7.1 mi)
- Sutton Coldfield (7.9 mi)
- Cannock (8.6 mi)