Wiltshire · England
Automatic rising bollard installation in Salisbury
Automatic bollards supplied and fitted in Salisbury, Wiltshire: surveyed, scanned for services, set in proper foundations and finished to match the ground.
Computer-generated imageAbout automatic bollards in Salisbury
Hydraulic and electro-mechanical rising bollards installed with controls, safety loops, signals and power, for managed vehicle access. In Salisbury, that tends to mean sites such as community car parks, filling-station forecourts and high street shopfronts.
We work across SP1, SP2 and SP5 — Salisbury itself and places including Wilton, Netherhampton, Great Wishford and South Newton. Nearby, we also work in Andover (16.4 miles), Totton (16.9 miles), Southampton (20.5 miles) and Eastleigh (20.6 miles), measured as the crow flies. Salisbury is about 21 miles from Southampton.
Key facts for this area
- Area
- Wiltshire, England
- Highway authority
- Wiltshire Council (local roads)
- Planning authority
- Wiltshire Council
- Postcodes
- SP1, SP2 and SP5
- Guide price
- Typically £2,995–£14,995 per bollard + VAT
- Survey
- Free, with a fixed written quote
- Nearby
- Andover (16.4 mi), Totton (16.9 mi), Southampton (20.5 mi), Eastleigh (20.6 mi)
What Salisbury sites use automatic bollards for
Around Salisbury, automatic bollards usually solve one of these:
- Bus gates and access-only routes where the highway authority agrees
- Private estates and gated developments without a full gate
- Emergency access routes that must open on demand
Salisbury: typical automatic bollard prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,995–£8,045 + VAT | Electro-mechanical or entry hydraulic, controls, loops and photocell |
| Upgraded | £6,595–£11,595 + VAT | Heavy-duty hydraulic, traffic light, signs and LED head |
| Premium | £10,195–£14,995 + VAT | High-cycle or crash-rated automatic bollard |
Per bollard, installed with controls, loops and commissioning; no regional adjustment. Guide only — the fixed price follows a survey.
Permissions and groundwork in Salisbury
The highway authority for local roads in Salisbury is Wiltshire Council; motorways and trunk roads sit with National Highways. Automatic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Salisbury need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Wiltshire Council before posts go in.
Reinstatement around each cassette is made flush so vehicles pass smoothly over the lowered head. Without drainage, rainwater and silt collect in the cassette, corrode the mechanism and can freeze around the post in winter.
- On public highway, rising bollards normally need highway authority approval, with signs and signals to their requirements.
- Prepare a written risk assessment covering pedestrians, cyclists, following vehicles and children, and choose safety devices to match.
From survey to handover
Ducts, drainage and loops
Ducts are laid between the bollards, the controller cabinet and access devices, with draw pits where runs change direction. The drain is connected and the safety and exit loops are cut into the surface and sealed.
Power and controls
A qualified electrician installs the supply and isolation, and the controller, traffic lights, photocells and access devices are mounted and wired.
Train and hand over
Site staff are shown how to lower the bollard in an emergency and how to recognise faults. You receive keys, the commissioning record and the manufacturer's manuals.
Specification choices
| Option | Detail |
|---|---|
| Fail-safe behaviour | Configured to lower or stay raised on power loss, with a manual release, depending on whether access or security takes priority. |
| Unrated or crash-rated | Unrated units control traffic; rated units are tested to IWA 14-1, ISO 22343-1 or PAS 68 for security entrances, with deeper, heavier foundations. |
| Head lighting and finishes | LED rings or lights in the head, reflective bands, and powder-coated or stainless finishes. Lit heads help drivers see the post when it is raised. |
Pricing automatic bollards in Salisbury
Two Salisbury jobs with the same number of posts can price quite differently. The usual reasons:
- Hydraulic or electro-mechanical drive and the duty cycle needed
- Length of duct runs, drainage connections and power supply distance
- Number of bollards and lanes controlled
Looking after them
Automatic bollards need planned servicing, not just repair when they fail. Frequency depends on how often the bollard cycles; a busy entrance needs more visits than a rarely used one.
We can also service, repair or replace existing posts anywhere in Salisbury.
Common questions
Which parts of Salisbury do you cover for automatic bollards?
We cover all of Salisbury (SP1, SP2 and SP5) and the rest of Wiltshire. We also work in Andover, Totton and Southampton.
Who gives permission for bollards on the pavement in Salisbury?
The highway authority for local roads in Salisbury is Wiltshire Council; motorways and trunk roads sit with National Highways. Automatic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do automatic bollards cost in Salisbury?
In Salisbury, typically £2,995–£14,995 per bollard, installed with controls, loops and commissioning, plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Should I choose hydraulic or electro-mechanical bollards?
Choose by how often the bollard will move and how you want it maintained. Hydraulic units suit busy entrances and heavier rated posts but need fluid and seal checks. Electro-mechanical units avoid fluid and are often simpler to look after at moderate traffic levels.
Can rising bollards be installed on a public road?
Only with the highway authority's approval, and they will set requirements for signs, signals and operation. On private land the decision is yours, but the same safety principles apply.