Bollard Installers

Hampshire · England

Automatic rising bollard installation in Andover

Local installation of automatic bollards in Andover — free survey, fixed written price, and posts set to the right spacing for people and vehicles.

Stainless steel automatic rising bollard in a controlled access lane, with induction loop slots cut in the tarmac and a red and green signal on a postComputer-generated image

Andover automatic bollards

We supply and fit automatic bollards throughout Andover, typically for sites such as high street shopfronts, small industrial units and filling-station forecourts. Hydraulic and electro-mechanical rising bollards installed with controls, safety loops, signals and power, for managed vehicle access.

We work across SP10 and SP11 — Andover itself and places including Knights Enham, Foxcotte, East Anton and Picket Piece. Jobs in Andover can be combined with work in Winchester (12.6 miles), Newbury (15 miles), Salisbury (16.4 miles) and Thatcham (16.7 miles) (straight-line distances). Andover is about 22 miles from Southampton.

Andover at a glance

Area
Hampshire, England
Highway authority
Hampshire County Council (local roads)
Planning authority
the council for Test Valley
Postcodes
SP10 and SP11
Guide price
Typically £2,995–£14,995 per bollard + VAT
Survey
Free, with a fixed written quote
Nearby
Winchester (12.6 mi), Newbury (15 mi), Salisbury (16.4 mi), Thatcham (16.7 mi)

Typical automatic bollards jobs in Andover

Typical reasons Andover sites choose automatic bollards:

  • Secure loading yards where rated automatic posts are specified
  • Pedestrianised streets with permitted delivery windows
  • Entrances where a gate would block pedestrian desire lines

Andover: typical automatic bollard prices

SpecificationGuide priceIncludes
Standard£2,995–£8,045 + VATElectro-mechanical or entry hydraulic, controls, loops and photocell
Upgraded£6,595–£11,595 + VATHeavy-duty hydraulic, traffic light, signs and LED head
Premium£10,195–£14,995 + VATHigh-cycle or crash-rated automatic bollard

Per bollard, installed with controls, loops and commissioning; no regional adjustment. Guide only — the fixed price follows a survey.

Permissions and groundwork in Andover

Hampshire County Council is the highway authority covering Andover's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.

Many private-land installations in Andover need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Test Valley before posts go in.

The pit base is usually connected to a surface water drain or a soakaway, and on clay or high water table sites that connection needs particular attention. Loops are cut into a sound surface: badly cracked tarmac or block paving may need resurfacing first, because loops in broken surfaces fail early.

  • Agree emergency access with the fire and ambulance services, including how they will lower the bollards.
  • Prepare a written risk assessment covering pedestrians, cyclists, following vehicles and children, and choose safety devices to match.

From survey to handover

Excavate and set cassettes

Each cassette pit is excavated to the manufacturer's depth, with the base prepared to drain. Cassettes are set to finished road level and fall, then concreted in.

Power and controls

A qualified electrician installs the supply and isolation, and the controller, traffic lights, photocells and access devices are mounted and wired.

Commission and test

Rise and fall times, loop detection, photocells, lights and the manual release are tested with vehicles present. Safety settings are recorded against the risk assessment.

Finishes and options

OptionDetail
Hydraulic driveIntegral or remote power pack. Suits high-frequency entrances and heavier rated units, with periodic checks on fluid, seals and hoses.
Head lighting and finishesLED rings or lights in the head, reflective bands, and powder-coated or stainless finishes. Lit heads help drivers see the post when it is raised.
Heights and diametersRaised heights are commonly around 500–800 mm for traffic control and taller for security models, with diameters varying by drive and rating.

What affects the quote

Our South West guide prices are a starting point; the survey in Andover firms them up. What tends to move them:

  • Unrated or crash-rated model and its foundation size
  • Number of bollards and lanes controlled
  • Traffic management during installation on live roads

Keeping them working

Frequency depends on how often the bollard cycles; a busy entrance needs more visits than a rarely used one. Typical visits clean and inspect the cassette and drain, check hydraulic fluid or gearbox condition, test loops, photocells, lights and the manual release, and read the controller's fault log.

For damaged or loose posts in Andover, repairs and replacements are priced in writing first.

Questions about automatic bollards in Andover

Which parts of Andover do you cover for automatic bollards?

We cover all of Andover (SP10 and SP11) and the rest of Hampshire. We also work in Winchester, Newbury and Salisbury.

Do I need consent for automatic bollards on a public footway in Andover?

Hampshire County Council is the highway authority covering Andover's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.

What's a typical price for automatic bollards in Andover?

In Andover, typically £2,995–£14,995 per bollard, installed with controls, loops and commissioning, plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.

Can rising bollards be installed on a public road?

Only with the highway authority's approval, and they will set requirements for signs, signals and operation. On private land the decision is yours, but the same safety principles apply.

What happens in a power cut?

That depends on how the system is configured. Traffic bollards are often set to lower or can be lowered with a manual release, so vehicles are not trapped. Security bollards may be set to stay raised, with a procedure for staff to follow.

Automatic bollards in nearby towns

Other bollard services in Andover

Need bollards fitted?

Free site survey and a fixed, itemised written quote for installation work. Repairs and servicing are priced in writing before we start.

CallFree quote