Hampshire · England
Bollard replacement in Andover
Local installation of replacement bollards in Andover — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAndover replacement bollards
Replacement is the right answer when a post is too damaged to repair or no longer suits how the site is used. In Andover, that tends to mean sites such as high street shopfronts, schools and local parades.
Coverage in Andover takes in the SP10 and SP11 postcode districts and nearby places like Knights Enham, Foxcotte, East Anton and Picket Piece. Nearby, we also work in Winchester (12.6 miles), Newbury (15 miles), Salisbury (16.4 miles) and Thatcham (16.7 miles), measured as the crow flies. Andover is about 22 miles from Southampton.
Key facts for this area
- Area
- Hampshire, England
- Highway authority
- Hampshire County Council (local roads)
- Planning authority
- the council for Test Valley
- Postcodes
- SP10 and SP11
- Guide price
- Typically £215–£1,195 per post + VAT (£255–£1,445 inc VAT for homes); minimum job £445
- Survey
- Free, with a fixed written quote
- Nearby
- Winchester (12.6 mi), Newbury (15 mi), Salisbury (16.4 mi), Thatcham (16.7 mi)
Common reasons for replacement bollards in Andover
What replacement bollards usually sort out in Andover:
- Replacing mixed, mismatched posts with a consistent line
- Crushed sockets and failed telescopic cassettes
- Posts bent, sheared or broken by vehicle impacts
Replacement bollard prices in Andover
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £215–£625 + VAT · £255–£745 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £505–£925 + VAT · £605–£1,095 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £805–£1,195 + VAT · £965–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per post replaced, old post and footing removed; no regional adjustment. Guide only — the fixed price follows a survey.
What we check first in Andover
Hampshire County Council is the highway authority covering Andover's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
Many private-land installations in Andover need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at the council for Test Valley before posts go in.
Where a replacement is being made after an impact, the surrounding paving and kerbs are checked as well, because a vehicle that bent a post has often lifted or cracked the surface beside it, and that damage is included in the quote rather than left for later. Removing an old bollard often reveals more concrete than expected, because foundations from different eras vary widely in size.
- Upgrades to rated products must use the manufacturer's tested foundation, specified with your security adviser.
- On public highway, the highway authority may need to approve the replacement or carry out the work itself.
How the job runs
Make safe
If a broken post or stub is a hazard, it can be removed or capped first. That is priced separately in writing so you can approve it on its own.
Survey and match
At the free site survey we measure the existing bollards, photograph the line and check the foundations. A fixed written quote sets out like-for-like and any upgrade options.
Remove the old bollard
The damaged post is cut or extracted and the old foundation broken out, checking for services as the hole is opened.
Specification choices
| Option | Detail |
|---|---|
| Heavier section | Larger diameter, thicker wall or concrete-filled steel where posts keep getting bent. |
| Matched finishes | RAL powder coat, stainless grade and finish, or heritage paint schemes matched to the existing line. |
| Like-for-like | Same diameter, height, finish and fixing, so the line looks unchanged. |
Pricing replacement bollards in Andover
Two Andover jobs with the same number of posts can price quite differently. The usual reasons:
- Making safe before the replacement
- Number of posts and the product chosen
- Upgrades that need larger foundations
Looking after them
Treat new posts as part of your routine inspections: check for lean, chips and faded bands. A single impact on a rarely struck post is bad luck; repeated strikes in the same spot point to a layout problem, such as a tight turn or a missing wheel stop, that a stronger bollard alone will not solve.
If posts in Andover are later hit or damaged, we can repair or replace them — see bollard repairs.
Bollard replacement in Andover: FAQs
Which parts of Andover do you cover for replacement bollards?
We cover all of Andover (SP10 and SP11) and the rest of Hampshire. We also work in Winchester, Newbury and Salisbury.
Do I need consent for bollards on a public footway in Andover?
The highway authority for local roads in Andover is Hampshire County Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
How much do replacement bollards cost in Andover?
In Andover, typically £215–£1,195 per post replaced, old post and footing removed, plus VAT (£255–£1,445 including VAT for homeowners), with a minimum job of £445 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
What happens to the old bollard?
It is taken away with the broken-out concrete. Steel and iron are recycled where possible. Original heritage bollards can be returned to you if you want to keep them.
Can you replace just one bollard in a line?
Yes. We measure and match the existing posts so the new one sits in line at the same height and finish. If the original product is no longer made, we show you a close equivalent first.
Bollard replacement near Andover
- Winchester (12.6 mi)
- Newbury (15 mi)
- Salisbury (16.4 mi)
- Thatcham (16.7 mi)
- Basingstoke (18 mi)
- Eastleigh (18 mi)