Wales · 2 towns
Automatic rising bollard installation in Wrexham
Automatic bollards for sites across Wrexham: surveyed, quoted in writing and installed by our crews.
Computer-generated imageAutomatic bollards in Wrexham
Across Wrexham, typical sites for automatic bollards include high street shopfronts, community car parks and schools. Hydraulic and electro-mechanical rising bollards installed with controls, safety loops, signals and power, for managed vehicle access.
Highway authorities for local roads in Wrexham: Wrexham County Borough Council.
Choose your town in Wrexham
Guide prices in Wrexham
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £2,895–£7,795 + VAT | Electro-mechanical or entry hydraulic, controls, loops and photocell |
| Upgraded | £6,395–£11,295 + VAT | Heavy-duty hydraulic, traffic light, signs and LED head |
| Premium | £9,895–£14,595 + VAT | High-cycle or crash-rated automatic bollard |
Per bollard, installed with controls, loops and commissioning; -3% for Wales. Guide only — the fixed price follows a survey.
Local authorities across Wrexham
| Town | Highway / roads authority | Planning authority |
|---|---|---|
| Wrexham | Wrexham County Borough Council | Wrexham County Borough Council |
| Coedpoeth | Wrexham County Borough Council | Wrexham County Borough Council |
Rules for automatic bollards in Wales
Bollards on adopted highway are a matter for the highway authority under the Highways Act 1980, so they need its written agreement. On private land the owner's agreement is what matters; listed buildings and conservation areas need a word with the planning team first. Rising bollards should fail safe, never rise beneath a vehicle, carry clear signs and give the emergency services an override.
Details and sources: bollard rules in Wales.
How installation works
Excavate and set cassettes
Each cassette pit is excavated to the manufacturer's depth, with the base prepared to drain. Cassettes are set to finished road level and fall, then concreted in.
Ducts, drainage and loops
Ducts are laid between the bollards, the controller cabinet and access devices, with draw pits where runs change direction. The drain is connected and the safety and exit loops are cut into the surface and sealed.
Power and controls
A qualified electrician installs the supply and isolation, and the controller, traffic lights, photocells and access devices are mounted and wired.
Train and hand over
Site staff are shown how to lower the bollard in an emergency and how to recognise faults. You receive keys, the commissioning record and the manufacturer's manuals.
Automatic bollards in Wrexham: FAQs
Do you cover all of Wrexham for automatic bollards?
Yes — including Wrexham and Coedpoeth. Enter your postcode in the price calculator to confirm.
How much do automatic bollards cost in Wrexham?
In Wrexham, typically £2,895–£14,595 per bollard, installed with controls, loops and commissioning, plus VAT, using our Wales guide prices. The fixed figure comes in writing after we've seen the site.
Who do I ask about bollards on public land in Wrexham?
For local roads, Wrexham County Borough Council; the Welsh Government covers trunk roads. Bollards on adopted highway need the authority's written agreement.
What stops a rising bollard hitting a car?
A safety loop in the road detects a vehicle above or close to the bollard and blocks the rise, backed up by photocells. Traffic lights and head lights tell drivers when to stop. The settings are tested on site with vehicles before handover.
Can rising bollards be installed on a public road?
Only with the highway authority's approval, and they will set requirements for signs, signals and operation. On private land the decision is yours, but the same safety principles apply.