Aberdeenshire · Scotland
Bollard removal in Ellon
Planning bollard removal jobs in Ellon? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout bollard removal jobs in Ellon
Whether it's filling-station forecourts, high street shopfronts and residential driveways, bollard removal jobs in Ellon are planned around who needs to get through and who doesn't. Automatic and lighting bollards also need their electrical supply made safe by a qualified electrician.
We cover Ellon's AB41 postcode district, including places such as Tarves, Pitmedden, Methlick and Foveran. Jobs in Ellon can be combined with work in Inverurie (12.6 miles), Peterhead (14.5 miles), Aberdeen (15.3 miles) and Westhill (16.5 miles) (straight-line distances).
Key facts for this area
- Area
- Aberdeenshire, Scotland
- Roads authority
- Aberdeenshire Council (local roads)
- Planning authority
- Aberdeenshire Council
- Postcodes
- AB41
- Guide price
- Typically £80–£345 per post + VAT (£95–£405 inc VAT for homes); minimum job £295
- Survey
- Free, with a fixed written quote
Guide prices for Ellon
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £80–£185 + VAT · £95–£215 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £155–£265 + VAT · £185–£315 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £235–£345 + VAT · £275–£405 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; no regional adjustment. Guide only — the fixed price follows a survey.
Common reasons for bollard removal jobs in Ellon
Why sites in Ellon book bollard removal jobs:
- Decommissioning automatic bollards that are no longer used
- Access routes no longer needing control
- Taking out broken stubs and empty sockets
Before we dig in Ellon
Ellon falls under Aberdeenshire Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
If your site in Ellon is listed or inside a conservation area, check with the local planning authority (Aberdeenshire Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Where the area is being resurfaced anyway, removal is timed to happen first so the patching disappears under the new surface. Backfilling in compacted layers stops later settlement, which otherwise shows as a dip in the new surface.
- Collect and dispose of hydraulic fluid and waste properly rather than leaving it in the ground.
- Consider whether removal leaves an asset or route unprotected and record the decision in your risk assessment.
How the job runs
Survey what is in the ground
The free site survey identifies bollard types, likely foundation sizes, any power or ducts, and what the area will be used for next. You receive a fixed written quote for the agreed level of removal.
Check consents and reasons
Before removal, check whether the bollards were required by a planning condition, a lease, a security plan or the highway authority, and whether they protect something such as a meter or a building corner.
Remove posts and foundations
Posts are cut off or extracted, foundations broken out where agreed, and sockets, cassettes and ducts removed or capped.
Options to consider
| Option | Detail |
|---|---|
| Full extraction | Post and foundation broken out, leaving clear ground for resurfacing or new works. |
| Automatic bollard decommissioning | Electrical isolation, hydraulic drain-down, cassette removal and capping of ducts. |
| Relocation | Careful removal of reusable posts and reinstallation in new positions on the same site. |
What moves the price in Ellon
Two Ellon jobs with the same number of posts can price quite differently. The usual reasons:
- Cutting off or full foundation extraction
- Number and type of bollards
- Size of foundations and amount of spoil
Looking after them
Keep any keys, manuals and records from removed automatic bollards until the controller and cabling have also been dealt with, as they help an electrician confirm what was connected. If foundations were left in place, record their positions on site drawings so future contractors are not surprised by buried concrete.
If posts in Ellon are later hit or damaged, we can repair or replace them — see bollard repairs.
Bollard removal in Ellon: FAQs
Do you carry out bollard removal jobs in Ellon?
We cover all of Ellon (AB41) and the rest of Aberdeenshire. We also work in Inverurie, Peterhead and Aberdeen.
Do I need consent for bollards on a public footway in Ellon?
Ellon falls under Aberdeenshire Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
How much do bollard removal jobs cost in Ellon?
In Ellon, typically £80–£345 per post removed with footing, surface made good, plus VAT (£95–£405 including VAT for homeowners), with a minimum job of £295 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Do we need permission to remove bollards?
Sometimes. Bollards required by a planning condition, lease, security plan or the roads authority should not be removed without checking. Historic bollards in conservation areas may also be protected.
Can automatic bollards be removed safely?
Yes, once the supply has been isolated and disconnected by a qualified electrician and any hydraulic fluid drained. The cassette is then lifted and the pit backfilled. Ducts are capped or removed.