Aberdeenshire · Scotland
Bollard removal in Peterhead
Planning bollard removal jobs in Peterhead? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageAbout bollard removal jobs in Peterhead
We supply and fit bollard removal jobs throughout Peterhead, typically for sites such as schools, local parades and community buildings. Removal of fixed, removable, telescopic and automatic bollards, including foundations, with the surface made good to match.
We cover Peterhead's AB42 postcode district, including places such as Mintlaw, Cruden Bay, Longside and St Fergus. We also cover neighbouring Ellon (14.5 miles) and Fraserburgh (15.3 miles) — distances are straight-line.
Key facts for this area
- Area
- Aberdeenshire, Scotland
- Roads authority
- Aberdeenshire Council (local roads)
- Planning authority
- Aberdeenshire Council
- Postcodes
- AB42
- Guide price
- Typically £80–£345 per post + VAT (£95–£405 inc VAT for homes); minimum job £295
- Survey
- Free, with a fixed written quote
- Nearby
- Ellon (14.5 mi), Fraserburgh (15.3 mi)
Guide prices for Peterhead
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £80–£185 + VAT · £95–£215 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £155–£265 + VAT · £185–£315 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £235–£345 + VAT · £275–£405 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; no regional adjustment. Guide only — the fixed price follows a survey.
Common reasons for bollard removal jobs in Peterhead
Typical reasons for bollard removal jobs in Peterhead:
- Moving bollards to new positions on the same site
- Car park and forecourt redesigns
- Removing redundant lighting bollards
What we check first in Peterhead
For anything on the public footway in Peterhead we check with the roads authority first — Aberdeenshire Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
If your site in Peterhead is listed or inside a conservation area, check with the local planning authority (Aberdeenshire Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Cables and pipes are often laid close to existing posts after they were installed, so breaking out is done carefully and services are traced first. Older bollards may sit in large blocks of concrete, and rated bollards in very large reinforced bases, so full extraction can mean substantial breaking out and spoil removal.
- In conservation areas, check before removing historic bollards, as consent may be needed or retention expected.
- Collect and dispose of hydraulic fluid and waste properly rather than leaving it in the ground.
Installation, step by step
Survey what is in the ground
The free site survey identifies bollard types, likely foundation sizes, any power or ducts, and what the area will be used for next. You receive a fixed written quote for the agreed level of removal.
Check consents and reasons
Before removal, check whether the bollards were required by a planning condition, a lease, a security plan or the highway authority, and whether they protect something such as a meter or a building corner.
Backfill and reinstate
Holes are backfilled in compacted layers and the surface reinstated to match, so there is no settlement or trip edge.
Finishes and options
| Option | Detail |
|---|---|
| Relocation | Careful removal of reusable posts and reinstallation in new positions on the same site. |
| Socket and cassette removal | Removable sockets and telescopic or semi-automatic cassettes extracted whole and the hole filled. |
| Cut off below surface | Post removed at or below finished level, foundation left in place and the surface patched. Quick and low-disruption. |
Pricing bollard removal jobs in Peterhead
Two Peterhead jobs with the same number of posts can price quite differently. The usual reasons:
- Surface type and reinstatement
- Number and type of bollards
- Electrical isolation and hydraulic drain-down
Keeping them working
Keep any keys, manuals and records from removed automatic bollards until the controller and cabling have also been dealt with, as they help an electrician confirm what was connected. After removal, keep an eye on reinstated areas for settlement over the following months, particularly where large foundations were broken out.
We can also service, repair or replace existing posts anywhere in Peterhead.
Common questions
Do you carry out bollard removal jobs in Peterhead?
We cover all of Peterhead (AB42) and the rest of Aberdeenshire. We also work in Ellon and Fraserburgh.
Do I need consent for bollards on a public footway in Peterhead?
For anything on the public footway in Peterhead we check with the roads authority first — Aberdeenshire Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
What's a typical price for bollard removal jobs in Peterhead?
In Peterhead, typically £80–£345 per post removed with footing, surface made good, plus VAT (£95–£405 including VAT for homeowners), with a minimum job of £295 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Can removed bollards be reused elsewhere on site?
Often, if they come out undamaged. Steel posts and removable bollards relocate well. New foundations are formed at the new positions.
What happens to the waste?
Steel and iron are recycled where possible, concrete and spoil are taken away, and hydraulic fluid is disposed of properly. You are left with a clean, reinstated area.