Aberdeenshire · Scotland
Telescopic bollard installation in Peterhead
Telescopic bollards for sites across Peterhead and the rest of Aberdeenshire, from the first measurement to the last relaid paving block.
Computer-generated imagePeterhead telescopic bollards
Whether it's local parades, community car parks and residential driveways, telescopic bollards in Peterhead are planned around who needs to get through and who doesn't. Because the post stays in its cassette, there is nothing to store and nothing to lose.
Coverage in Peterhead takes in the AB42 postcode district and nearby places like Mintlaw, Cruden Bay, Longside and St Fergus. Nearby, we also work in Ellon (14.5 miles) and Fraserburgh (15.3 miles), measured as the crow flies.
Peterhead at a glance
- Area
- Aberdeenshire, Scotland
- Roads authority
- Aberdeenshire Council (local roads)
- Planning authority
- Aberdeenshire Council
- Postcodes
- AB42
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
- Nearby
- Ellon (14.5 mi), Fraserburgh (15.3 mi)
Telescopic bollard prices in Peterhead
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Typical telescopic bollards jobs in Peterhead
Typical reasons Peterhead sites choose telescopic bollards:
- Commercial yards where posts must not be left lying around
- Access roads closed outside working hours
- Domestic driveways where the bollard is used daily
What we check first in Peterhead
For anything on the public footway in Peterhead we check with the roads authority first — Aberdeenshire Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at Aberdeenshire Council can confirm before anything is ordered.
Reinstatement matches the drive, whether block paving, tarmac, resin-bound or imprinted concrete. Positions are scanned and hand-dug before committing.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the roads authority's agreement.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
From survey to handover
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Specification choices
| Option | Detail |
|---|---|
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
What moves the price in Peterhead
Two Peterhead jobs with the same number of posts can price quite differently. The usual reasons:
- Stainless or powder-coated finish
- Surface type and quality of reinstatement
- Post size and whether lift assistance is wanted
Keeping them working
Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free. If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized.
We can also service, repair or replace existing posts anywhere in Peterhead.
Common questions
Which parts of Peterhead do you cover for telescopic bollards?
We cover all of Peterhead (AB42) and the rest of Aberdeenshire. We also work in Ellon and Fraserburgh.
Do I need consent for telescopic bollards on a public footway in Peterhead?
Peterhead falls under Aberdeenshire Council as roads authority. If the line of posts crosses onto adopted road or pavement, permission comes before excavation; on private land it does not.
How much do telescopic bollards cost in Peterhead?
In Peterhead, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.