Aberdeenshire · Scotland
Telescopic bollard installation in Fraserburgh
Planning telescopic bollards in Fraserburgh? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageTelescopic bollards in Fraserburgh
Whether it's local parades, small industrial units and high street shopfronts, telescopic bollards in Fraserburgh are planned around who needs to get through and who doesn't. Because the post stays in its cassette, there is nothing to store and nothing to lose.
We work across AB43 — Fraserburgh itself and places including Rosehearty, Inverallochy, Strichen and St Combs. Nearby, we also work in Peterhead (15.3 miles), measured as the crow flies.
Fraserburgh at a glance
- Area
- Aberdeenshire, Scotland
- Roads authority
- Aberdeenshire Council (local roads)
- Planning authority
- Aberdeenshire Council
- Postcodes
- AB43
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
- Nearby
- Peterhead (15.3 mi)
Typical telescopic bollards jobs in Fraserburgh
Around Fraserburgh, telescopic bollards usually solve one of these:
- Domestic driveways where the bollard is used daily
- Access roads closed outside working hours
- Allocated parking bays in flats and private developments
Guide prices for Fraserburgh
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
What we check first in Fraserburgh
In Scotland the council is the roads authority for local roads, which in Fraserburgh means Aberdeenshire Council. Telescopic bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
If your site in Fraserburgh is listed or inside a conservation area, check with the local planning authority (Aberdeenshire Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go. Positions are scanned and hand-dug before committing.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the roads authority's agreement.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
How the job runs
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Choosing the right spec
| Option | Detail |
|---|---|
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
Pricing telescopic bollards in Fraserburgh
Our Scotland guide prices are a starting point; the survey in Fraserburgh firms them up. What tends to move them:
- Post size and whether lift assistance is wanted
- Excavation depth and the presence of services under the drive
- Number of posts and keyed-alike locks
Keeping them working
Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt. Lubricate the lock with a suitable spray, especially before winter.
If posts in Fraserburgh are later hit or damaged, we can repair or replace them — see bollard repairs.
Telescopic bollards in Fraserburgh: FAQs
Can you install telescopic bollards anywhere in Fraserburgh?
We cover all of Fraserburgh (AB43) and the rest of Aberdeenshire. We also work in Peterhead.
Who gives permission for bollards on the pavement in Fraserburgh?
In Scotland the council is the roads authority for local roads, which in Fraserburgh means Aberdeenshire Council. Telescopic bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
What's a typical price for telescopic bollards in Fraserburgh?
In Fraserburgh, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Will a telescopic bollard stop my car being stolen?
It adds a physical barrier that a thief has to defeat before driving away, which slows them down and makes the car a less attractive target. It is one layer of protection, not a complete answer to keyless car theft.
Can a telescopic bollard be fitted into a resin or imprinted drive?
Yes, though the cut has to be made cleanly and the surface patched around the lid. Resin and imprinted finishes are hard to match exactly, so we plan positions to keep visible patching small.