Aberdeenshire · Scotland
Telescopic bollard installation in Ellon
Local installation of telescopic bollards in Ellon — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout telescopic bollards in Ellon
We supply and fit telescopic bollards throughout Ellon, typically for sites such as schools, local parades and residential driveways. Because the post stays in its cassette, there is nothing to store and nothing to lose.
Coverage in Ellon takes in the AB41 postcode district and nearby places like Tarves, Pitmedden, Methlick and Foveran. Jobs in Ellon can be combined with work in Inverurie (12.6 miles), Peterhead (14.5 miles), Aberdeen (15.3 miles) and Westhill (16.5 miles) (straight-line distances).
Key facts for this area
- Area
- Aberdeenshire, Scotland
- Roads authority
- Aberdeenshire Council (local roads)
- Planning authority
- Aberdeenshire Council
- Postcodes
- AB41
- Guide price
- Typically £345–£1,195 per bollard + VAT (£405–£1,445 inc VAT for homes); minimum job £645
- Survey
- Free, with a fixed written quote
Typical telescopic bollards jobs in Ellon
Common uses in a place like Ellon:
- Sites with no power for automatic bollards
- Access roads closed outside working hours
- Shared drives that need occasional closing
Guide prices for Ellon
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £345–£705 + VAT · £405–£845 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £605–£955 + VAT · £725–£1,145 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £855–£1,195 + VAT · £1,045–£1,445 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; no regional adjustment. Guide only — the fixed price follows a survey.
Before we dig in Ellon
For anything on the public footway in Ellon we check with the roads authority first — Aberdeenshire Council for local roads, Transport Scotland on trunk routes. Private ground such as a car park or forecourt only needs the owner's go-ahead.
Bollards on private land often need no planning application, but listed buildings and conservation areas are different; the planning service at Aberdeenshire Council can confirm before anything is ordered.
Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go. Reinstatement matches the drive, whether block paving, tarmac, resin-bound or imprinted concrete.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the roads authority's agreement.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
From survey to handover
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Finishes and options
| Option | Detail |
|---|---|
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Lock types | Keyed cylinder locks, often with a cover to keep out dirt; keyed alike for multi-bay sites where one key should open every post. |
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
Pricing telescopic bollards in Ellon
Two Ellon jobs with the same number of posts can price quite differently. The usual reasons:
- Excavation depth and the presence of services under the drive
- Drainage: simple soakaway or a connection to a drain
- Number of posts and keyed-alike locks
Keeping them working
If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized. Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free.
If posts in Ellon are later hit or damaged, we can repair or replace them — see bollard repairs.
Telescopic bollards in Ellon: FAQs
Which parts of Ellon do you cover for telescopic bollards?
We cover all of Ellon (AB41) and the rest of Aberdeenshire. We also work in Inverurie, Peterhead and Aberdeen.
Do I need consent for telescopic bollards on a public footway in Ellon?
In Scotland the council is the roads authority for local roads, which in Ellon means Aberdeenshire Council. Telescopic bollards on an adopted footway need its consent; trunk roads sit with Transport Scotland.
What's a typical price for telescopic bollards in Ellon?
In Ellon, typically £345–£1,195 per bollard with cassette, supplied and installed, plus VAT (£405–£1,445 including VAT for homeowners), with a minimum job of £645 plus VAT, using our Scotland guide prices. The fixed figure comes in writing after we've seen the site.
Is a telescopic bollard harder to lift than a removable one?
Usually easier, because you only lift it up a short distance within its cassette and many models have lift assistance. You also never carry it or store it anywhere.
Will a telescopic bollard stop my car being stolen?
It adds a physical barrier that a thief has to defeat before driving away, which slows them down and makes the car a less attractive target. It is one layer of protection, not a complete answer to keyless car theft.