Dorset · England
Bollard removal in Bournemouth
Bollard removal jobs for sites across Bournemouth and the rest of Dorset, from the first measurement to the last relaid paving block.
Computer-generated imageBollard removal in Bournemouth
From industrial estates, supermarket frontages and high streets, Bournemouth has plenty of places where bollard removal jobs earn their keep. Posts can be cut off at or below ground level or fully extracted with their concrete.
Coverage in Bournemouth takes in the BH2, BH4, BH1, BH3, BH8 and BH9 postcode districts. We also cover neighbouring Christchurch (4.4 miles), Poole (4.6 miles), New Milton (9.7 miles) and Totton (21.8 miles) — distances are straight-line. Bournemouth is about 24 miles from Southampton.
Key facts for this area
- Area
- Dorset, England
- Highway authority
- Bournemouth, Christchurch and Poole Council (local roads)
- Planning authority
- Bournemouth, Christchurch and Poole Council
- Postcodes
- BH2, BH4, BH1, BH3, BH8, BH9, BH5 and BH7
- Guide price
- Typically £80–£345 per post + VAT (£95–£405 inc VAT for homes); minimum job £295
- Survey
- Free, with a fixed written quote
- Nearby
- Christchurch (4.4 mi), Poole (4.6 mi), New Milton (9.7 mi), Totton (21.8 mi)
Why Bournemouth sites book bollard removal jobs
Typical reasons for bollard removal jobs in Bournemouth:
- Moving bollards to new positions on the same site
- Removing redundant lighting bollards
- Car park and forecourt redesigns
Guide prices for Bournemouth
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £80–£185 + VAT · £95–£215 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £155–£265 + VAT · £185–£315 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £235–£345 + VAT · £275–£405 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; no regional adjustment. Guide only — the fixed price follows a survey.
Permissions and groundwork in Bournemouth
Bournemouth, Christchurch and Poole Council is the highway authority covering Bournemouth's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
If your site in Bournemouth is listed or inside a conservation area, check with the local planning authority (Bournemouth, Christchurch and Poole Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Backfilling in compacted layers stops later settlement, which otherwise shows as a dip in the new surface. Older bollards may sit in large blocks of concrete, and rated bollards in very large reinforced bases, so full extraction can mean substantial breaking out and spoil removal.
- In conservation areas, check before removing historic bollards, as consent may be needed or retention expected.
- Consider whether removal leaves an asset or route unprotected and record the decision in your risk assessment.
How the job runs
Check consents and reasons
Before removal, check whether the bollards were required by a planning condition, a lease, a security plan or the highway authority, and whether they protect something such as a meter or a building corner.
Remove posts and foundations
Posts are cut off or extracted, foundations broken out where agreed, and sockets, cassettes and ducts removed or capped.
Backfill and reinstate
Holes are backfilled in compacted layers and the surface reinstated to match, so there is no settlement or trip edge.
Choosing the right spec
| Option | Detail |
|---|---|
| Automatic bollard decommissioning | Electrical isolation, hydraulic drain-down, cassette removal and capping of ducts. |
| Socket and cassette removal | Removable sockets and telescopic or semi-automatic cassettes extracted whole and the hole filled. |
| Full extraction | Post and foundation broken out, leaving clear ground for resurfacing or new works. |
What affects the quote
Our South West guide prices are a starting point; the survey in Bournemouth firms them up. What tends to move them:
- Size of foundations and amount of spoil
- Electrical isolation and hydraulic drain-down
- Surface type and reinstatement
After installation
If foundations were left in place, record their positions on site drawings so future contractors are not surprised by buried concrete. After removal, keep an eye on reinstated areas for settlement over the following months, particularly where large foundations were broken out.
If posts in Bournemouth are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Can you carry out bollard removal jobs anywhere in Bournemouth?
We cover all of Bournemouth (BH2, BH4, BH1, BH3, BH8 and BH9) and the rest of Dorset. We also work in Christchurch, Poole and New Milton.
Who gives permission for bollards on the pavement in Bournemouth?
The highway authority for local roads in Bournemouth is Bournemouth, Christchurch and Poole Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for bollard removal jobs in Bournemouth?
In Bournemouth, typically £80–£345 per post removed with footing, surface made good, plus VAT (£95–£405 including VAT for homeowners), with a minimum job of £295 plus VAT, using our South West guide prices. The fixed figure comes in writing after we've seen the site.
Should bollards be cut off or fully removed?
Cut off if the area is staying as it is and nothing will be built or dug there later. Fully remove if you are resurfacing, planting or installing something new, because buried concrete gets in the way. The quote can price both.
Can automatic bollards be removed safely?
Yes, once the supply has been isolated and disconnected by a qualified electrician and any hydraulic fluid drained. The cassette is then lifted and the pit backfilled. Ducts are capped or removed.