East Sussex · England
Bollard removal in Portslade
Bollard removal jobs for sites across Portslade and the rest of East Sussex, from the first measurement to the last relaid paving block.
Computer-generated imageBollard removal in Portslade
In the town of Portslade, bollard removal jobs tend to go in at local parades, residential driveways and schools. Removal of fixed, removable, telescopic and automatic bollards, including foundations, with the surface made good to match.
We cover every part of Portslade in the BN41 postcode district. Nearby, we also work in Hove (2.3 miles), Brighton (3.5 miles), Rottingdean (7.2 miles) and Worthing (7.2 miles), measured as the crow flies. Portslade is about 3 miles from Brighton.
Portslade at a glance
- Area
- East Sussex, England
- Highway authority
- Brighton and Hove City Council (local roads)
- Planning authority
- Brighton and Hove City Council
- Postcodes
- BN41
- Guide price
- Typically £85–£365 per post + VAT (£95–£435 inc VAT for homes); minimum job £305
- Survey
- Free, with a fixed written quote
- Nearby
- Hove (2.3 mi), Brighton (3.5 mi), Rottingdean (7.2 mi), Worthing (7.2 mi)
Why Portslade sites book bollard removal jobs
Typical reasons for bollard removal jobs in Portslade:
- Moving bollards to new positions on the same site
- Car park and forecourt redesigns
- Access routes no longer needing control
Bollard removal prices in Portslade
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £85–£205 + VAT · £95–£245 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £165–£285 + VAT · £195–£335 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £255–£365 + VAT · £305–£435 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; +6% for South East. Guide only — the fixed price follows a survey.
What we check first in Portslade
The highway authority for local roads in Portslade is Brighton and Hove City Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Portslade is listed or inside a conservation area, check with the local planning authority (Brighton and Hove City Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Older bollards may sit in large blocks of concrete, and rated bollards in very large reinforced bases, so full extraction can mean substantial breaking out and spoil removal. Foundations are rarely the size anyone expects.
- In conservation areas, check before removing historic bollards, as consent may be needed or retention expected.
- Check whether the bollards were required by a planning condition, lease, security plan or the highway authority before removing them.
How the job runs
Survey what is in the ground
The free site survey identifies bollard types, likely foundation sizes, any power or ducts, and what the area will be used for next. You receive a fixed written quote for the agreed level of removal.
Check consents and reasons
Before removal, check whether the bollards were required by a planning condition, a lease, a security plan or the highway authority, and whether they protect something such as a meter or a building corner.
Make supplies safe
For automatic and lighting bollards, a qualified electrician isolates and disconnects the supply, and hydraulic units are drained.
Finishes and options
| Option | Detail |
|---|---|
| Lighting bollard removal | Supply made dead and cables terminated or removed by a qualified electrician before posts are lifted. |
| Socket and cassette removal | Removable sockets and telescopic or semi-automatic cassettes extracted whole and the hole filled. |
| Automatic bollard decommissioning | Electrical isolation, hydraulic drain-down, cassette removal and capping of ducts. |
What affects the quote
Our South East guide prices are a starting point; the survey in Portslade firms them up. What tends to move them:
- Number and type of bollards
- Cutting off or full foundation extraction
- Surface type and reinstatement
Looking after them
Where cables were terminated rather than removed, record where they are and confirm with the electrician that they are dead and labelled. If foundations were left in place, record their positions on site drawings so future contractors are not surprised by buried concrete.
For damaged or loose posts in Portslade, repairs and replacements are priced in writing first.
Questions about bollard removal jobs in Portslade
Which parts of Portslade do you cover for bollard removal jobs?
We cover all of Portslade (BN41) and the rest of East Sussex. We also work in Hove, Brighton and Rottingdean.
Do I need consent for bollards on a public footway in Portslade?
In Portslade, work on adopted pavements and verges needs consent from Brighton and Hove City Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do bollard removal jobs cost in Portslade?
In Portslade, typically £85–£365 per post removed with footing, surface made good, plus VAT (£95–£435 including VAT for homeowners), with a minimum job of £305 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Will the surface look patched after removal?
On block paving it can be nearly invisible, as the blocks are relaid. Tarmac, resin and concrete usually show a patch, especially on older weathered surfaces. Timing removal before resurfacing avoids that.
What happens to the waste?
Steel and iron are recycled where possible, concrete and spoil are taken away, and hydraulic fluid is disposed of properly. You are left with a clean, reinstated area.
Bollard removal near Portslade
- Hove (2.3 mi)
- Brighton (3.5 mi)
- Rottingdean (7.2 mi)
- Worthing (7.2 mi)
- Burgess Hill (8.8 mi)
- Haywards Heath (11.8 mi)