East Sussex · England
Telescopic bollard installation in Portslade
Local installation of telescopic bollards in Portslade — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imagePortslade telescopic bollards
Telescopic bollards suit plenty of Portslade sites, residential driveways, filling-station forecourts and community car parks among them. Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads.
Coverage in Portslade takes in the BN41 postcode district. Jobs in Portslade can be combined with work in Hove (2.3 miles), Brighton (3.5 miles), Rottingdean (7.2 miles) and Worthing (7.2 miles) (straight-line distances). Portslade is about 3 miles from Brighton.
Portslade at a glance
- Area
- East Sussex, England
- Highway authority
- Brighton and Hove City Council (local roads)
- Planning authority
- Brighton and Hove City Council
- Postcodes
- BN41
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £675
- Survey
- Free, with a fixed written quote
- Nearby
- Hove (2.3 mi), Brighton (3.5 mi), Rottingdean (7.2 mi), Worthing (7.2 mi)
Typical telescopic bollards jobs in Portslade
Common uses in a place like Portslade:
- Access roads closed outside working hours
- Commercial yards where posts must not be left lying around
- Domestic driveways where the bollard is used daily
Guide prices for Portslade
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Consents, ground and services in Portslade
Brighton and Hove City Council is the highway authority covering Portslade's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
If your site in Portslade is listed or inside a conservation area, check with the local planning authority (Brighton and Hove City Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Telescopic bollards need a deeper excavation than other manual bollards, so ground and services decide where they can go. Positions are scanned and hand-dug before committing.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
- If the drive is shared, agree positions and keys with the other users first.
How the job runs
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Set the cassette
The cassette is set vertical and its top exactly at finished surface level and fall, then concreted in. A cassette set high or low is a common cause of tyre damage and trip edges.
Choosing the right spec
| Option | Detail |
|---|---|
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
| Lid and head designs | Flush hinged lids, removable caps or integrated heads that close the cassette top when lowered. |
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
Pricing telescopic bollards in Portslade
When we price telescopic bollards in Portslade, these make the biggest difference:
- Number of posts and keyed-alike locks
- Stainless or powder-coated finish
- Drainage: simple soakaway or a connection to a drain
Keeping them working
If the post becomes stiff or will not lower fully, the usual causes are debris in the cassette or a blocked drain, both of which are easier to fix early than after the post has seized. Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free.
If posts in Portslade are later hit or damaged, we can repair or replace them — see bollard repairs.
Telescopic bollards in Portslade: FAQs
Do you install telescopic bollards in Portslade?
We cover all of Portslade (BN41) and the rest of East Sussex. We also work in Hove, Brighton and Rottingdean.
Do I need consent for telescopic bollards on a public footway in Portslade?
Brighton and Hove City Council is the highway authority covering Portslade's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for telescopic bollards in Portslade?
In Portslade, typically £365–£1,245 per bollard with cassette, supplied and installed, plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £675 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
What if it freezes in winter?
Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.
Telescopic bollards in nearby towns
- Hove (2.3 mi)
- Brighton (3.5 mi)
- Rottingdean (7.2 mi)
- Worthing (7.2 mi)
- Burgess Hill (8.8 mi)
- Haywards Heath (11.8 mi)