East Sussex · England
Telescopic bollard installation in Hove
Planning telescopic bollards in Hove? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageHove telescopic bollards
Whether it's high streets, supermarket frontages and housing association car parks, telescopic bollards in Hove are planned around who needs to get through and who doesn't. Key-locked telescopic bollards that retract into a ground cassette, for driveways, private bays and access roads.
Coverage in Hove takes in the BN3 postcode district. We also cover neighbouring Brighton (1.2 miles), Portslade (2.3 miles), Rottingdean (4.9 miles) and Burgess Hill (8.9 miles) — distances are straight-line.
Local details
- Area
- East Sussex, England
- Highway authority
- Brighton and Hove City Council (local roads)
- Planning authority
- Brighton and Hove City Council
- Postcodes
- BN3
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £675
- Survey
- Free, with a fixed written quote
- Nearby
- Brighton (1.2 mi), Portslade (2.3 mi), Rottingdean (4.9 mi), Burgess Hill (8.9 mi)
What Hove sites use telescopic bollards for
Typical reasons Hove sites choose telescopic bollards:
- Domestic driveways where the bollard is used daily
- Shared drives that need occasional closing
- Sites with no power for automatic bollards
Telescopic bollard prices in Hove
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
Before we dig in Hove
The highway authority for local roads in Hove is Brighton and Hove City Council; motorways and trunk roads sit with National Highways. Telescopic bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Hove need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Brighton and Hove City Council before posts go in.
Clay soils and high water tables mean a gravel base alone will not drain the cassette; a connection to a surface water drain or a separate soakaway is then needed, and foul drains are not used. Reinstatement matches the drive, whether block paving, tarmac, resin-bound or imprinted concrete.
- Confirm the bollard is on your land; bollards on a public footway or dropped kerb need the highway authority's agreement.
- If the drive is shared, agree positions and keys with the other users first.
Installation, step by step
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Cut and excavate
The surface is cut neatly and the hole dug to the cassette's full depth plus a drainage layer, with care near any service that crosses the drive.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Options to consider
| Option | Detail |
|---|---|
| Reflective bands | Bands near the top help drivers see a raised post at night, particularly on drives shared with visitors. |
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
Pricing telescopic bollards in Hove
Two Hove jobs with the same number of posts can price quite differently. The usual reasons:
- Post size and whether lift assistance is wanted
- Excavation depth and the presence of services under the drive
- Stainless or powder-coated finish
Looking after them
Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt. Lubricate the lock with a suitable spray, especially before winter.
If posts in Hove are later hit or damaged, we can repair or replace them — see bollard repairs.
Telescopic bollards in Hove: FAQs
Can you install telescopic bollards anywhere in Hove?
We cover all of Hove (BN3) and the rest of East Sussex. We also work in Brighton, Portslade and Rottingdean.
Who gives permission for bollards on the pavement in Hove?
In Hove, work on adopted pavements and verges needs consent from Brighton and Hove City Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
How much do telescopic bollards cost in Hove?
In Hove, typically £365–£1,245 per bollard with cassette, supplied and installed, plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £675 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
What if it freezes in winter?
Freezing usually means water is standing in the cassette. Do not force the post; pour warm, not boiling, water around the lid and lift once free. Then have the drainage checked.
How deep does a telescopic bollard go into the ground?
Usually around the exposed height of the post plus the cassette base and drainage layer, which often comes to a metre or more. The exact depth depends on the model. That depth is why we check for services under the drive first.
Telescopic bollards near Hove
- Brighton (1.2 mi)
- Portslade (2.3 mi)
- Rottingdean (4.9 mi)
- Burgess Hill (8.9 mi)
- Worthing (9.1 mi)
- Haywards Heath (11.9 mi)