East Sussex · England
Telescopic bollard installation in Brighton
Telescopic bollards for sites across Brighton and the rest of East Sussex, from the first measurement to the last relaid paving block.
Computer-generated imageTelescopic bollards in Brighton
From city-centre plazas, stadium approaches and university campuses, Brighton has plenty of places where telescopic bollards earn their keep. Because the post stays in its cassette, there is nothing to store and nothing to lose.
We cover Brighton's BN1 and BN2 postcode districts, including places such as Falmer and Waterhall. We also cover neighbouring Hove (1.2 miles), Portslade (3.5 miles), Rottingdean (3.7 miles) and Burgess Hill (9 miles) — distances are straight-line.
Brighton at a glance
- Area
- East Sussex, England
- Highway authority
- Brighton and Hove City Council (local roads)
- Planning authority
- Brighton and Hove City Council
- Postcodes
- BN1 and BN2
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £675
- Survey
- Free, with a fixed written quote
- Nearby
- Hove (1.2 mi), Portslade (3.5 mi), Rottingdean (3.7 mi), Burgess Hill (9 mi)
What Brighton sites use telescopic bollards for
Typical reasons Brighton sites choose telescopic bollards:
- Access roads closed outside working hours
- Sites with no power for automatic bollards
- Commercial yards where posts must not be left lying around
What telescopic bollards cost in Brighton
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard with cassette, supplied and installed; +6% for South East. Guide only — the fixed price follows a survey.
What we check first in Brighton
Brighton and Hove City Council is the highway authority covering Brighton's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
If your site in Brighton is listed or inside a conservation area, check with the local planning authority (Brighton and Hove City Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Reinstatement matches the drive, whether block paving, tarmac, resin-bound or imprinted concrete. Drives commonly hide the water supply pipe, gas service, electric cable and drainage runs, often at shallow depth, and they cluster near the property boundary where posts are usually wanted.
- Leave access for emergency services on commercial and multi-occupancy sites, and record who holds keys.
- Connect drainage only to surface water systems or a soakaway, never to a foul drain.
What happens on site
Check depth and drainage
The free site survey checks how far down we can dig, where services run under the drive and how the ground drains. If water will stand, a drain connection is priced into the fixed written quote.
Form the drainage
A gravel soakaway is placed beneath the cassette, or a pipe is laid to a surface water drain or new soakaway.
Reinstate and test
The surface is made good to match. The post is raised, locked, lowered and locked several times to confirm smooth operation, and keys are handed over.
Choosing the right spec
| Option | Detail |
|---|---|
| Standard or lift-assisted | Lift-assisted models use a spring or counterweight so the post rises with little effort, useful for daily domestic use. |
| Diameter and height | Commonly around 90–140 mm diameter and 600–900 mm raised height, with larger posts for commercial use. |
| Finishes | Galvanised, powder-coated in common colours, or stainless steel to suit the frontage. |
What moves the price in Brighton
When we price telescopic bollards in Brighton, these make the biggest difference:
- Number of posts and keyed-alike locks
- Post size and whether lift assistance is wanted
- Surface type and quality of reinstatement
Keeping them working
Lower and raise the bollard regularly, even if you rarely need to, so the mechanism stays free. Clear leaves and grit from around the lid, and a few times a year lift the post fully and look into the cassette for standing water or silt.
For damaged or loose posts in Brighton, repairs and replacements are priced in writing first.
Questions about telescopic bollards in Brighton
Which parts of Brighton do you cover for telescopic bollards?
We cover all of Brighton (BN1 and BN2) and the rest of East Sussex. We also work in Hove, Portslade and Rottingdean.
Who gives permission for bollards on the pavement in Brighton?
Brighton and Hove City Council is the highway authority covering Brighton's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
What's a typical price for telescopic bollards in Brighton?
In Brighton, typically £365–£1,245 per bollard with cassette, supplied and installed, plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £675 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Why does my telescopic bollard fill with water?
Because the cassette is not draining, either through a blocked base, clay ground or no drainage provision at installation. Standing water rusts the post and can freeze it in place. Fixing the drainage usually solves the problem.
Is a telescopic bollard harder to lift than a removable one?
Usually easier, because you only lift it up a short distance within its cassette and many models have lift assistance. You also never carry it or store it anywhere.
Telescopic bollards near Brighton
- Hove (1.2 mi)
- Portslade (3.5 mi)
- Rottingdean (3.7 mi)
- Burgess Hill (9 mi)
- Worthing (10.3 mi)
- Seaford (11.3 mi)