East Sussex · England
Lighting bollard installation in Brighton
Lighting bollards for sites across Brighton and the rest of East Sussex, from the first measurement to the last relaid paving block.
Computer-generated imageAbout lighting bollards in Brighton
Across Brighton, typical sites for lighting bollards include retail parks, pedestrianised streets and multi-storey car parks. Outdoor lighting bollards need weatherproof and impact-resistant construction and must be connected and tested by a qualified electrician.
We work across BN1 and BN2 — Brighton itself and places including Falmer and Waterhall. Nearby, we also work in Hove (1.2 miles), Portslade (3.5 miles), Rottingdean (3.7 miles) and Burgess Hill (9 miles), measured as the crow flies.
Brighton at a glance
- Area
- East Sussex, England
- Highway authority
- Brighton and Hove City Council (local roads)
- Planning authority
- Brighton and Hove City Council
- Postcodes
- BN1 and BN2
- Guide price
- Typically £365–£1,245 per bollard + VAT (£435–£1,495 inc VAT for homes); minimum job £895
- Survey
- Free, with a fixed written quote
- Nearby
- Hove (1.2 mi), Portslade (3.5 mi), Rottingdean (3.7 mi), Burgess Hill (9 mi)
Typical lighting bollards jobs in Brighton
Around Brighton, lighting bollards usually solve one of these:
- Building entrances and approach routes
- Footpaths through housing developments and campuses
- Car park walkways and pedestrian crossings
What lighting bollards cost in Brighton
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £365–£745 + VAT · £435–£885 inc VAT | Standard post, foundation, reinstatement |
| Upgraded | £635–£995 + VAT · £755–£1,195 inc VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £905–£1,245 + VAT · £1,095–£1,495 inc VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, installed with a qualified electrician (supply run extra); +6% for South East. Guide only — the fixed price follows a survey.
Before we dig in Brighton
The highway authority for local roads in Brighton is Brighton and Hove City Council; motorways and trunk roads sit with National Highways. Lighting bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
Many private-land installations in Brighton need no planning application, but the rules don't clearly cover bollards, so listed buildings, conservation areas and prominent frontages are worth raising with the planning team at Brighton and Hove City Council before posts go in.
Most of the work in a lighting bollard scheme is underground. Cable trenches run between every position and back to the supply, often crossing paths, drives and planting, so the routes are planned to minimise cuts through hard surfaces and to avoid existing gas, water and telecoms services.
- Limit glare and upward light, and check for any planning or ecology conditions on lighting near sensitive habitats.
- In homes, new outdoor circuits are often notifiable building work; a registered electrician can usually self-certify it.
Installation, step by step
Survey and lighting layout
A free site survey looks at the routes to be lit, where power can come from, surfaces and buried services. Bollard spacing is set from the product's light data, and you receive a fixed written quote.
Dig cable routes
Trenches are dug between bollard positions and the supply point, avoiding existing services, with cable or duct laid at a suitable depth and warning tape above.
Set the bases
Anchor cages or foundations are cast at each position with the cable entry in the right place, set level so each bollard stands plumb.
Options to consider
| Option | Detail |
|---|---|
| Body materials and finishes | Powder-coated aluminium or steel, or stainless steel, in colours to suit the building. |
| Colour temperature | Warm white for residential and amenity areas; warmer or amber options near sensitive wildlife habitats. |
| Solar bollards | Self-contained with panel and battery; no cabling. Suited to markers and low-use routes where lower output is acceptable. |
Pricing lighting bollards in Brighton
Our South East guide prices are a starting point; the survey in Brighton firms them up. What tends to move them:
- Distance from the supply and circuit requirements
- Length of cable routes and surfaces to be cut
- Controls such as photocells, timers or sensors
After installation
Clean diffusers so dirt and algae do not dim the light, check seals and fixings, and look for impact damage, especially in car parks. Photocells and timers need resetting when the clocks change unless they adjust automatically.
If posts in Brighton are later hit or damaged, we can repair or replace them — see bollard repairs.
Common questions
Do you install lighting bollards in Brighton?
We cover all of Brighton (BN1 and BN2) and the rest of East Sussex. We also work in Hove, Portslade and Rottingdean.
Do I need consent for lighting bollards on a public footway in Brighton?
Brighton and Hove City Council is the highway authority covering Brighton's local roads. If any post would stand on adopted highway rather than your land, that consent is the first thing we sort out.
How much do lighting bollards cost in Brighton?
In Brighton, typically £365–£1,245 per bollard, installed with a qualified electrician (supply run extra), plus VAT (£435–£1,495 including VAT for homeowners), with a minimum job of £895 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
How far apart should lighting bollards be?
That depends on the light output, beam pattern and how evenly the path needs to be lit. Spacing is worked out from the product's light data rather than a fixed distance. Too far apart leaves dark patches between pools of light.
Do lighting bollards need an electrician to install?
Yes, mains lighting bollards must be connected by a qualified electrician, who tests and certifies the circuit. We arrange that as part of the job. Solar bollards avoid mains work but provide less light.
Lighting bollards in nearby towns
- Hove (1.2 mi)
- Portslade (3.5 mi)
- Rottingdean (3.7 mi)
- Burgess Hill (9 mi)
- Worthing (10.3 mi)
- Seaford (11.3 mi)