East Sussex · England
Warehouse and loading-bay bollards in Brighton
Planning warehouse impact bollards in Brighton? We check ownership, consents and buried services first, then quote a fixed price.
Computer-generated imageWarehouse bollards in Brighton
Warehouse impact bollards suit plenty of Brighton sites, pedestrianised streets, stadium approaches and retail parks among them. Yellow steel and polymer impact bollards for forklift zones, loading bays, doors, columns and racking inside warehouses.
We work across BN1 and BN2 — Brighton itself and places including Falmer and Waterhall. Nearby, we also work in Hove (1.2 miles), Portslade (3.5 miles), Rottingdean (3.7 miles) and Burgess Hill (9 miles), measured as the crow flies.
Key facts for this area
- Area
- East Sussex, England
- Highway authority
- Brighton and Hove City Council (local roads)
- Planning authority
- Brighton and Hove City Council
- Postcodes
- BN1 and BN2
- Guide price
- Typically £185–£1,245 per bollard + VAT; minimum job £465
- Survey
- Free, with a fixed written quote
- Nearby
- Hove (1.2 mi), Portslade (3.5 mi), Rottingdean (3.7 mi), Burgess Hill (9 mi)
Typical warehouse impact bollards jobs in Brighton
Around Brighton, warehouse impact bollards usually solve one of these:
- Sprinkler risers, electrical panels and gas meters
- Pedestrian crossings and the ends of walkways
- Building columns in forklift aisles and turning areas
What warehouse impact bollards cost in Brighton
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £185–£635 + VAT | Standard post, foundation, reinstatement |
| Upgraded | £515–£965 + VAT | Upgraded finish or fittings, reflective band, matched keys |
| Premium | £835–£1,245 + VAT | Heavy-duty or architectural spec, premium finish |
Per bollard, supplied and fixed; +6% for South East. Guide only — the fixed price follows a survey.
Consents, ground and services in Brighton
The highway authority for local roads in Brighton is Brighton and Hove City Council; motorways and trunk roads sit with National Highways. Warehouse impact bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
If your site in Brighton is listed or inside a conservation area, check with the local planning authority (Brighton and Hove City Council) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
External yard bollards can be root-fixed in concrete foundations, with the usual checks for buried drainage and cables. Where a slab is too thin or poor, the options include through-bolting, a larger base plate to spread load, a polymer bollard that reduces anchor forces, or breaking out and casting a new local foundation.
- Use your workplace transport risk assessment to decide where protection is needed, in line with HSE guidance on workplace transport.
- Check with the building owner before drilling into slabs with underfloor heating, guidance wires or post-tensioned reinforcement.
How the job runs
Walk the site with the vehicles running
At the free site survey we watch traffic routes, note the vehicles and loads, and look for existing damage that shows where impacts happen. You receive a fixed written quote with each position and product listed.
Check the slab
Slab thickness, joints, cracks and any underfloor services or heating are checked, and anchors are chosen for the floor rather than taken from a standard list.
Plan around operations
Work is phased by aisle or zone, or done out of hours, with each area barriered off while drilling. Dust is controlled with extraction where products are stored nearby.
Options to consider
| Option | Detail |
|---|---|
| Column and rack end guards | Wrap-around or corner protectors for columns and racking uprights where a single post will not fit. |
| Cast-in or base-plated | Base plates suit existing slabs. External yard posts can be cast into concrete foundations for heavier duty. |
| Polymer impact bollards | Flex and recover on impact, reducing damage to anchors, floor and vehicle. Need clearance to deflect. |
What moves the price in Brighton
Two Brighton jobs with the same number of posts can price quite differently. The usual reasons:
- Slab condition and the anchors or foundations it needs
- Removal of damaged existing protection
- Floor marking and associated signage
After installation
On steel bollards look for bending, cracked welds, loose or sheared anchors and cracked concrete around the base plate. Inspect warehouse bollards regularly as part of routine site checks, and after any reported impact.
For damaged or loose posts in Brighton, repairs and replacements are priced in writing first.
Questions about warehouse impact bollards in Brighton
Can you install warehouse impact bollards anywhere in Brighton?
We cover all of Brighton (BN1 and BN2) and the rest of East Sussex. We also work in Hove, Portslade and Rottingdean.
Do I need consent for warehouse impact bollards on a public footway in Brighton?
In Brighton, work on adopted pavements and verges needs consent from Brighton and Hove City Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
What's a typical price for warehouse impact bollards in Brighton?
In Brighton, typically £185–£1,245 per bollard, supplied and fixed, plus VAT, with a minimum job of £465 plus VAT, using our South East guide prices. The fixed figure comes in writing after we've seen the site.
Can you install while the warehouse is operating?
Usually yes, by working zone by zone with each area barriered off, or by working nights or weekends. Drilling dust is controlled near stored goods. We agree the phasing with your site manager.
What is PAS 13?
PAS 13 is a code of practice for safety barriers used in workplaces, including a method for impact testing them. Products tested to it state how much impact they can take. It helps compare products on performance rather than appearance.
Warehouse bollards in nearby towns
- Hove (1.2 mi)
- Portslade (3.5 mi)
- Rottingdean (3.7 mi)
- Burgess Hill (9 mi)
- Worthing (10.3 mi)
- Seaford (11.3 mi)