Essex · England
Bollard removal in Billericay
Local installation of bollard removal jobs in Billericay — free survey, fixed written price, and posts set to the right spacing for people and vehicles.
Computer-generated imageAbout bollard removal jobs in Billericay
In the town of Billericay, bollard removal jobs tend to go in at community buildings, community car parks and schools. Posts can be cut off at or below ground level or fully extracted with their concrete.
Coverage in Billericay takes in the CM12 and CM11 postcode districts and nearby places like Noak Hill, Little Burstead, Havering's Grove and Crays Hill. We also cover neighbouring Basildon (4.5 miles), Wickford (4.6 miles), Brentwood (4.9 miles) and Pitsea (5.9 miles) — distances are straight-line. Southend-on-Sea is around 14 miles away.
Key facts for this area
- Area
- Essex, England
- Highway authority
- Essex County Council (local roads)
- Planning authority
- the council for Basildon
- Postcodes
- CM12 and CM11
- Guide price
- Typically £80–£355 per post + VAT (£95–£425 inc VAT for homes); minimum job £295
- Survey
- Free, with a fixed written quote
Billericay: typical bollard removal prices
| Specification | Guide price | Includes |
|---|---|---|
| Standard | £80–£195 + VAT · £95–£225 inc VAT | Post out, hole backfilled, simple surface |
| Upgraded | £165–£275 + VAT · £195–£325 inc VAT | Footing removed, tarmac or block paving reinstated |
| Premium | £245–£355 + VAT · £285–£425 inc VAT | Large footing, concrete or natural stone reinstated |
Per post removed with footing, surface made good; +3% for East of England. Guide only — the fixed price follows a survey.
Why Billericay sites book bollard removal jobs
What bollard removal jobs usually sort out in Billericay:
- Taking out broken stubs and empty sockets
- Moving bollards to new positions on the same site
- Access routes no longer needing control
Consents, ground and services in Billericay
In Billericay, work on adopted pavements and verges needs consent from Essex County Council, the local highway authority. Car parks, forecourts and other private land only need the owner's permission.
If your site in Billericay is listed or inside a conservation area, check with the local planning authority (the council for Basildon) before choosing a finish — heritage settings often favour cast iron or painted steel over stainless.
Older bollards may sit in large blocks of concrete, and rated bollards in very large reinforced bases, so full extraction can mean substantial breaking out and spoil removal. Where the area is being resurfaced anyway, removal is timed to happen first so the patching disappears under the new surface.
- Have automatic and lighting bollard supplies isolated and made safe by a qualified electrician.
- Collect and dispose of hydraulic fluid and waste properly rather than leaving it in the ground.
Installation, step by step
Survey what is in the ground
The free site survey identifies bollard types, likely foundation sizes, any power or ducts, and what the area will be used for next. You receive a fixed written quote for the agreed level of removal.
Check consents and reasons
Before removal, check whether the bollards were required by a planning condition, a lease, a security plan or the highway authority, and whether they protect something such as a meter or a building corner.
Make supplies safe
For automatic and lighting bollards, a qualified electrician isolates and disconnects the supply, and hydraulic units are drained.
Choosing the right spec
| Option | Detail |
|---|---|
| Relocation | Careful removal of reusable posts and reinstallation in new positions on the same site. |
| Full extraction | Post and foundation broken out, leaving clear ground for resurfacing or new works. |
| Socket and cassette removal | Removable sockets and telescopic or semi-automatic cassettes extracted whole and the hole filled. |
What moves the price in Billericay
Two Billericay jobs with the same number of posts can price quite differently. The usual reasons:
- Electrical isolation and hydraulic drain-down
- Access, working hours and waste disposal
- Size of foundations and amount of spoil
After installation
After removal, keep an eye on reinstated areas for settlement over the following months, particularly where large foundations were broken out. Keep any keys, manuals and records from removed automatic bollards until the controller and cabling have also been dealt with, as they help an electrician confirm what was connected.
If posts in Billericay are later hit or damaged, we can repair or replace them — see bollard repairs.
Questions about bollard removal jobs in Billericay
Do you carry out bollard removal jobs in Billericay?
We cover all of Billericay (CM12 and CM11) and the rest of Essex. We also work in Basildon, Wickford and Brentwood.
Who gives permission for bollards on the pavement in Billericay?
The highway authority for local roads in Billericay is Essex County Council; motorways and trunk roads sit with National Highways. Bollards on the adopted footway are a matter for the highway authority, so we only install there with its written agreement.
What's a typical price for bollard removal jobs in Billericay?
In Billericay, typically £80–£355 per post removed with footing, surface made good, plus VAT (£95–£425 including VAT for homeowners), with a minimum job of £295 plus VAT, using our East of England guide prices. The fixed figure comes in writing after we've seen the site.
Can removed bollards be reused elsewhere on site?
Often, if they come out undamaged. Steel posts and removable bollards relocate well. New foundations are formed at the new positions.
Can automatic bollards be removed safely?
Yes, once the supply has been isolated and disconnected by a qualified electrician and any hydraulic fluid drained. The cassette is then lifted and the pit backfilled. Ducts are capped or removed.
Bollard removal in nearby towns
- Basildon (4.5 mi)
- Wickford (4.6 mi)
- Brentwood (4.9 mi)
- Pitsea (5.9 mi)
- Stanford-le-Hope (7.3 mi)
- Chelmsford (7.7 mi)